Achat vérifié
Je cherchais quelque chose de simple et économique, et cette lampe répond parfaitement à mes attentes. Installation rapide, consommation contenue, et lumière agréable. Un bon investissement sur le long terme !
Horticulture Lighting Group·Supplemental Lighting
HLG 30 UVA UV Bar - Perfect to add to an HLG 550 or HLG 600
4.8
Réf. HLG-30-UVA Horticulture Lighting Group
HLG 30 UVA UV Bar - Perfect to add to an HLG 550 or HLG 600
Waterproof Passive
- The 30 watt waterproof UVA LED BAR should be used for a maximum 12 hour cycle.
- The cooling system is 60cm long and comes with a built-in power supply.
- Features bolt-on installation for any DIY kit.
- Contains 365nm + 385nm UVA LEDs.
- Complementary lighting to other full spectrum lighting.
GrowLED since 2009
French group · indoor growing expertise
Pay in instalments
3 or 4 payments from €50 with Alma, subject to eligibility
24h express available
After dispatch, if offered at checkout
Showroom near Nancy (54)
Au Palétuvier · Champigneulles
HLG 30 UVA UV Bar - Perfect to add to...
230,28 €
Highlights
Étanche
Yes
Parraine tes proches
5 % pour toi & 5 % pour ton ami
Description
Product presentation
Introduction
The HLG 30 UVA UV Bar is a premium accessory for indoor grow lighting systems. It is specially designed to be added to HLG 550 or HLG 600 lighting systems to increase ultraviolet (UV) radiation levels for growing plants.
Technical characteristics
The HLG 30 UVA UV Bar has the following technical characteristics:
- Wavelength: 365-375 nm
- Power: 30 watts
- Input voltage: 240 VAC
- Light intensity: 400 μmol/s
- Lifespan: 50,000 hours
Understand
- 1 additional HLG 30 UVA bar
- 2 hangers
- Power cord 240v 0.125A
The benefits of using the HLG 30 UVA UV Bar
Using the HLG 30 UVA UV Bar has several benefits for growing plants, including:
Increased production of terpenes and flavonoids
UV radiation stimulates the production of terpenes and flavonoids in plants. Adding the HLG 30 UVA UV Bar to the HLG 550 or HLG 600 lighting systems increases UV radiation levels to promote higher production of these compounds.
Strengthening disease resistance
UV radiation also has a positive effect on plant resistance to diseases and pests. Adding the HLG 30 UVA UV Bar to the HLG 550 or HLG 600 lighting systems helps strengthen plants' natural defenses, making them less likely to be attacked by diseases or pests.
Improved overall plant quality
By stimulating the production of terpenes and flavonoids, as well as increasing disease resistance, the use of the HLG 30 UVA UV Bar helps improve the overall quality of growing plants. The plants have a more intense taste and smell, a brighter color and a firmer texture, making them more attractive to consumers.
How to use the HLG 30 UVA UV Bar
The HLG 30 UVA UV Bar is easy to install and use. Simply attach it to the HLG 550 or HLG 600 lighting system using the supplied brackets and power screws, and plug it into a standard electrical outlet. It is recommended to adjust the height of the UV bar according to the growth stage of the plants to achieve the best results.
Conclusion
In summary, the HLG 30 UVA UV Bar is a premium accessory for indoor grow lighting systems. It is easy to install and use, and offers many benefits to growing plants, including higher production of terpenes and flavonoids, increased disease resistance, and overall improvement in plant quality. If you are an indoor grower looking to maximize the quality and quantity of your plant production, the HLG 30 UVA UV Bar is an excellent choice for upgrading your existing HLG 550 or HLG 600 lighting system.
Order the HLG 30 UVA UV Bar now to improve the quality and quantity of your indoor plant production.
Technical data sheet
Features detailed
| Waterproof | Yes |
|---|---|
| Thermal management | Passive |
| Power consumption (W) | 30 |
| PPFD (µmol/m²/s) | 400 |
| Compatibility | HLG 550, HLG 600 Rspec, HLG 650R, Scorpion series |
| Length (cm) | 60 |
Convinced? Shipped from France. Add to cart — 230,28 €
They've adopted it
Reviews customers
Achat vérifié
Quelle chance d'avoir découvert cette barre UV ! L'installation a été rapide et le résultat lumineux vraiment appréciable. L'ambiance de ma pièce s'en trouve transformée sans coûter trop cher. Vraiment satisfait.
Achat vérifié
J'ai trouvé ce panneau à un prix très intéressant et il fonctionne parfaitement. Facile à installer, il chauffe peu et dure bien. Très satisfait !
Achat vérifié
Merci
Excellent rapport qualité.
Achat vérifié
Franchement, j'ai été impressionné
Franchement, j'ai été impressionné par ce produit. Après quelques jours d'utilisation, j'ai remarqué une vraie différence dans les résultats. L'efficacité énergétique est au rendez-vous, et les plantes poussent visiblement mieux. Le service client a été réactif à mes questions. Livraison bien faite, produit bien protégé. Je recommande vivement à tous ceux qui cherchent une solution fiable.
Achat vérifié
Franchement, c'est du
Franchement, c'est du bon produit. Livraison rapide et bien emballé. Très content.
Achat vérifié
Qualité
Ça marche nickel.
Achat vérifié
Excellent choix. Ce produit
Excellent choix. Ce produit fonctionne mieux que prévu. Les résultats sont visibles rapidement. Livraison rapide et soignée. Le service client a été très courtois et réactif. La qualité de fabrication est impressionnante. Je suis très satisfait et je vais certainement en racheter.
Achat vérifié
Franchement, c'est du
Franchement, c'est du bon boulot. Reçu rapidement, bien protégé. Les résultats sont au rendez-vous.
Aucun avis ne correspond à ce filtre.
Frequently asked questions
Your questions
Is the UV Bar HLG 30 UVA compatible with other lighting systems than the HLG 550 or HLG 600?
Of course, the UV Bar HLG 30 UVA is perfectly compatible with other lighting systems apart from the HLG 550 and 600. Even though it was designed to be easily attached to these two lamp models, it has an integrated power supply and a passive cooling system that allow it to operate independently. Thus, with other lamps or lighting systems, the bar can be installed independently near the main light source in your growing space. Accessories such as hangers and the power cord are also provided to facilitate this installation. However, please note that it is a lighting supplement and the UV Bar HLG 30 UVA is intended to be used in combination with a main horticultural lighting, regardless of the brand or model of the latter. Also, always take the necessary precautions when using the bar, such as wearing UV protective glasses. So, don't hesitate to add the UV Bar HLG 30 UVA to your existing lighting system to optimize your plants' growth and flowering!
Yo team, this HLG 30 UVA UV bar is awesome to boost my HLG 550/600, but I want to know if I need to change the distance of the UV bar depending on whether my plants are in growth or flowering? Like, is there an optimal setting to avoid burning the leaves?
The HLG 30 UVA UV bar complements the HLG 550/600 to boost terpene production and plant resilience.
There is no strict guideline to change distance based on growth or flowering. The key is to carefully monitor the condition of the leaves. If you notice signs of burning or UV stress, increase the distance a bit.
In summary: adjust the distance according to your plants' reaction, rather than the cultivation phase.
What is the best way to adjust the height of the UV HLG 30 UVA bar according to the different growth stages to optimize terpene production and disease resistance without harming the plants?
To make the most of the UV HLG 30 UVA bar in conjunction with an HLG 550 or HLG 600 panel, its height should be adjusted according to the growth phase:
- In the vegetative phase, keep the bar at a higher distance, around 45 to 60 cm, to avoid any excessive UV stress while gently stimulating the natural defenses.
- In flowering, reduce the distance to about 30 to 40 cm to intensify terpene production and optimize disease resistance.
This fine management allows for effectively dosed UV lighting without burning the leaves. Always remember to wear UV protective glasses when using it to protect your eyes.
Does adding the UV bar HLG 30 UVA lead to a significant additional electrical consumption compared to a system HLG 550 or HLG 600 alone?
The addition of the UV bar HLG 30 UVA to an HLG 550 or HLG 600 system increases electrical consumption by about 30 watts. This represents a moderate increase of 5 to 6% compared to the total power of the main panel (550 to 600 W).
This additional consumption is therefore important to consider, but remains reasonable to enjoy the benefits of UV light on the quality and resilience of your plants.
Can we use the HLG 30 UVA bar continuously throughout the flowering phase, or is it better to trigger it only during specific periods to optimize the production of terpenes and flavonoids?
Using the HLG 30 UVA bar throughout the flowering phase is entirely possible and can stimulate the production of terpenes and flavonoids, thereby improving the aromatic quality and resilience of the plants.
However, to optimize these benefits, it is often advisable to modulate exposure: varying the lighting periods according to the growth stage can prevent unnecessary stress and maximize the synthesis of compounds. Adjusting the height of the bar according to the height of the plants also complements this effect.
In summary, continuous use is feasible, but experimenting with specific exposure cycles can provide a better balance between production and plant health.
What is the optimal distance between the UV HLG 30 UVA bar and the plants recommended according to growth stages to avoid light stress while maximizing the production of terpenes and flavonoids?
For the UV HLG 30 UVA bar added to an HLG 550 or HLG 600, there is no fixed distance recommended by growth stage. The best method is to start at about 30 to 50 cm above the plants and then closely monitor their reaction.
If signs of light stress, such as leaf burning or discoloration, appear, the distance should be increased. This dynamic approach helps avoid stress while maximizing the natural production of terpenes and flavonoids, thanks to moderate exposure, around 12 hours a day.
Ultimately, it is the regular observation of your plants that will guide the optimal adjustment of the UV bar, based on their tolerance to UVA radiation at each growth phase.
Does adding the UV HLG 30 UVA bar to an HLG 600 have a negative impact on the electrical consumption or cooling needs of the system?
The addition of the UV HLG 30 UVA bar to an HLG 600 increases the electrical consumption by about 30 watts, which remains moderate over a 12-hour cycle. Regarding cooling, this bar uses a passive system, so the thermal impact is very low and should not impose an additional need for ventilation.
However, it is still advisable to monitor the temperature and overall consumption to ensure optimal operation of your setup.
However, it is still advisable to monitor the temperature and overall consumption to ensure optimal operation of your setup.
Can the UV HLG 30 UVA bar be used continuously with a HLG 600 without the risk of overheating or exceeding electrical consumption?
The UV HLG 30 UVA Bar is perfectly compatible with a HLG 600 and can be used continuously without significant risk of overheating, thanks to its passive cooling. Its consumption of 30 watts remains reasonable and will not cause major electrical exceedance with this panel.
However, it is essential to follow the installation instructions and the manufacturer's recommendations, particularly concerning the height and configuration of the system, to ensure optimal and safe use.
Has the UV HLG 30 UVA bar been tested under real conditions to confirm the gains in terpene production and disease resistance? Is the durability before failure in accordance with the announced 50,000 hours? Is the after-sales service responsive in case of defects?
The UV HLG 30 UVA bar is favored by users for its stimulating effect on terpene and resin production, although formal real-condition tests are not available. This suggests an interesting practical benefit for cultivation.
Regarding durability, horticultural LEDs generally benefit from a long lifespan, but the precise confirmation of the announced 50,000 hours for this model is not officially documented.
Finally, the brand's after-sales service is known for being reliable with quick delivery times, although feedback indicates that responsiveness in case of defect is generally positive but without formal guarantee. We remain at your disposal for any personalized follow-up.
What is the optimal distance between the UV HLG 30 UVA bar and the plant tops at each growth stage to maximize terpene and flavonoid production without the risk of light stress?
For the UV HLG 30 UVA bar, here are the recommended optimal distances according to the growth stages, in order to stimulate the production of terpenes and flavonoids without causing light stress:
- Regrowth (young plants): 30-45 cm (12-18 inches) to avoid stress.
- Vegetative growth: 23-30 cm (9-12 inches) to promote development.
- Flowering: 15-23 cm (6-9 inches) to maximize the production of aromatic compounds.
These distances are indicative: it is crucial to regularly observe your plants and adjust the height if you notice signs of stress, such as yellowing leaves. Gradual testing remains the best approach to find the ideal setting for your setup.
Is it easy to adjust the height of the UV HLG 30 UVA bar according to the growth stage of the plants without the risk of burns or other problems for my first indoor cultivation?
The UV HLG 30 UVA bar is specially designed to be easily adjustable in height thanks to the provided suspension brackets, allowing you to position it according to the different growth phases of your plants. Its moderate power of 30 watts and passive cooling system ensure safe use without the risk of burns or thermal stress, even for a first indoor cultivation.
Just gradually adjust the height to optimize the natural production of terpenes and strengthen the health of your plants, while avoiding any negative effects related to UVA light.
What is the ideal distance between the HLG 30 UVA UV bar and the canopy under an HLG 550 or HLG 600 panel to maximize terpene production without stressing the plants?
To optimize terpene production with the HLG 30 UVA bar added to an HLG 550 or HLG 600 panel, the ideal distance between the UV bar and the canopy is between 30 and 50 cm. This range provides a good dose of UVB while avoiding plant stress, such as leaf yellowing.
It is important to closely monitor the plants' reactions and adjust the height according to their tolerance, as each crop may react differently. This gradual method ensures effective stimulation of terpene and flavonoid synthesis without compromising plant health.
The HLG 30 UVA, with its moderate power of 30W and passive cooling, is perfectly suited to operate continuously above your crop, in addition to the main panel.
Is the UV HLG 30 UVA compatible with all indoor growing sizes, or is it optimal only for spaces like 1x1 with an HLG 550 or 600 panel?
The UV HLG 30 UVA is specifically designed as a supplement for the HLG 550 and HLG 600 panels, optimized for medium-sized indoor growing spaces, about 1x1 meter (4' x 4' to 5' x 5'). It is ideally suited for these configurations to enhance terpene production, resin, and plant resilience. This is not a suitable solution for very large areas or for standalone lighting. The goal is to improve the quality of your crop in conjunction with a main HLG panel, adjusting the height to avoid any UV stress.
What is the real impact of the HLG 30 UVA UV bar on the total electricity consumption when I add it to my HLG 550 or HLG 600 system, and how should I adjust its height according to the different growth phases to optimize results without harming the plants?
The HLG 30 UVA bar adds approximately 30 watts to the total electricity consumption of your setup with an HLG 550 or HLG 600, which remains moderate and does not significantly impact your bill or overall electrical capacity.
For height adjustment:
- In the vegetative phase, position the UV bar higher to avoid stressing the young plants.
- In the flowering phase, bring the bar closer to stimulate the production of terpenes and flavonoids while avoiding light stress (such as leaf yellowing).
- Regularly observe your plants and gradually adjust the distance to find the optimal height without the risk of burning.
This dynamic management will allow you to fully enjoy the benefits of UVA on the quality of your crops while ensuring their safety.
estimation electrical consumption of UV bar HLG 30 UVA in addition to HLG 600 UV efficiency per watt effective for 1.5x1.5 terpene production impact on EDF bill
The HLG 30 UVA UV Bar consumes approximately 30 watts, thus adding to the consumption of your HLG 600 (about 600 W). For a cultivation area of 1.5 m x 1.5 m, this combination remains perfectly suitable, with a total consumption around 630 W.
When operating 12 hours a day, this represents approximately 7.5 kWh per day, which equates to an increase of about 6.5 € per month on the EDF bill for the UV bar alone (average rate of €0.18/kWh).
The UV bar is specifically optimized to emit in the UVA range (315-400 nm), effectively promoting the stimulation of terpene and flavonoid production without excessive stress to the plants. This supplemental light enhances the aroma and quality of the harvests by mimicking natural sunlight.
It is therefore an excellent option for boosting the quality of your grow under HLG 600, with a good UV yield per watt, a reasonable electrical impact, and safe use in a 1.5 x 1.5 m space.
What is the difference in power consumption and yield in grams per watt between the HLG 550/600 alone and with the added HLG 30 UVA bar for indoor cultivation?
Adding the HLG 30 UVA bar to an HLG 600 panel increases the power consumption by about 30 watts, for a total of about 630 watts compared to 600 watts with the panel alone.
Regarding the yield in grams per watt, there are no precise data. However, the UV bar improves plant quality (aromas, resilience), which can indirectly optimize production, without guaranteeing a quantified increase in yield. The benefit lies primarily in quality rather than quantity.
In summary :
| Configuration | Power Consumption | Yield in g/W (estimated) |
|---|---|---|
| HLG 600 alone | About 600 W | Standard yield depending on cultivation |
| HLG 600 + HLG 30 UVA | About 630 W (+30 W) | Slight qualitative improvement, without quantified data |
What is the best height to mount the UV HLG 30 UVA bar to optimize terpene production under an HLG 600 during flowering?
To optimize terpene production with the UV HLG 30 UVA in conjunction with an HLG 600 during flowering, it is recommended to position it 30 to 50 cm above the tops of the plants. This height provides a good balance between UVA irradiation power and plant health, avoiding stress or yellowing of the leaves.
Thanks to the provided suspension supports, you can easily adjust this height based on your crop's reaction, aiming to stimulate terpene synthesis without exceeding the plants' tolerance threshold. Regular monitoring is therefore essential to fine-tune this adjustment.
Is it preferable to use the UV HLG 30 UVA bar continuously or in cycles, and how to adjust the height for different growth stages?
For the UV HLG 30 UVA bar, it is preferable to use it on a 12-hour cycle, which corresponds to the standard lighting duration during growth or flowering. This method optimizes the benefits of UVA, such as better resin production, without excessively exposing the plants.
Continuous use is possible due to the effective passive cooling of the bar, but it is advisable to remain cautious to avoid stressing the plants and to control electricity consumption.
Regarding the height of the bar, it should be adjusted by observing the plants:
- Higher during the growth phase to avoid stressing young plants
- Closer during flowering to stimulate terpenes and resin
This gradual approach helps to maximize the benefits of UVA at each stage. The UV HLG 30 UVA bar integrates perfectly with the HLG 550 or HLG 600 panels to enhance the quality of the crop.
Is it compatible even with the HLG 260 lamps or is it only for the 550 and 600?
The HLG 30 UVA UV Bar is specifically designed to be added to the HLG 550 and HLG 600. It installs easily thanks to supports and a power supply adapted to these models and optimizes terpene production and plant resistance.
Regarding the HLG 260, this bar is not officially compatible. Installation on this model is neither guaranteed nor recommended, as the architecture and power supply are different.
In summary, the HLG 30 UVA UV Bar is reserved for the HLG 550 and 600 for optimal performance and installation.
Not seeing your question?
Your browsing
Viewed recently
Go further
More from Horticulture Lighting Group
Horticulture Lighting Group
HLG 100 RSPEC - LED horticultural panel - Samsung LM301H LEDs - Delivered with EU plug
Discover View
Horticulture Lighting Group
HLG 100 4000K - LED horticultural panel - Samsung LM301H LEDs - Delivered with EU plug
Discover View
