PRO Range Carbon Filters: the high-performance solution for your indoor grows
PRO Range carbon filters represent the pinnacle of air filtration for indoor cultivation. Designed with superior activated carbon and advanced engineering, these filters eliminate up to 99.5% of odors, even during the most intense flowering phases. Whether you're growing in a 60x60cm tent or a multi-square-meter space, the PRO Range guarantees absolute discretion.
Unlike entry-level filters that quickly lose efficiency, the PRO Range maintains its performance for 18 to 24 months thanks to its optimized carbon density (up to 1050g of activated carbon for a 150mm model) and its multi-layer pre-filtration system. This is the difference between a filter that does the job and a filter that does it perfectly, even with powerful extractors running at 400-500 m³/h.
Why choose a PRO Range carbon filter
The first reason is the density of activated carbon. Where a standard filter contains 600-700g of carbon for a 125mm diameter, the PRO Range goes up to a minimum of 850g. This difference directly impacts efficiency: even with very strong odors at the end of flowering, the outgoing air remains perfectly neutral. The carbon used is steam-activated with a specific surface area of 1000-1200 m²/g, which is 30% more than the market average.
The pre-filtration system also makes all the difference. The washable polyester pre-filter captures large particles and protects the activated carbon from premature clogging. The result: your filter maintains its optimal airflow longer. On a 200mm extractor running at 800 m³/h, the pressure drop remains below 15% even after 12 months of intensive use.
Waterproofing is another strong point of this range. EPDM rubber seals and galvanized steel construction prevent air leaks that reduce efficiency. Frankly, when you invest in a good extractor and want results, it's worth going for equipment that stands the test of time.
How to choose your PRO Range carbon filter
The diameter is fundamental: it must exactly match that of your extractor. A 125mm filter on a 150mm extractor won't work. For airflow, choose a filter capable of handling 20% more than your extractor. If you have a 400 m³/h fan, aim for a filter rated for at least 480-500 m³/h.
The length of the filter directly influences the air/carbon contact time. For a 1.2x1.2m grow space with a 150mm extractor, a 50cm long filter will be more effective than a compact 35cm model. The carbon has more time to do its job. This is particularly important if you push your plants up to 9-10 weeks of flowering.
Also consider installation: some PRO Range models are equipped with reinforced metal flanges that simplify connection and prevent vibrations. In a grow tent where every decibel counts, this is not negligible. Check that the weight of the filter (often 8-12kg for large models) can be supported by your structure.
Frequently Asked Questions
Which PRO Range carbon filter should I choose for a 200mm extractor and a 1.2x1.2m tent?
For this setup, go for a 200mm filter capable of handling 600-800 m³/h depending on your extractor's power. A 1.44m² tent with 2m height is about 2.9m³, so your extractor renews the air 200-270 times per hour – perfect for flowering. Choose a model at least 45cm long to optimize contact time. The weight will be around 10-12kg, so check that your structure can support it.
How to properly install a PRO Range carbon filter in my indoor extraction system?
Always place the filter inside the grow space, never outside. Air should enter through the sides of the filter and exit through the center towards the extractor. Use metal clamps to secure the ducting, not tape that can fail with humidity. Suspend the filter with adjustable straps to absorb vibrations. Leave 15-20cm of free space around the filter for good air circulation.
What is the lifespan of a PRO Range carbon filter and when should I replace it?
A PRO Range filter generally lasts 18-24 months in intensive use, or 6-8 grow cycles. The first signs of wear appear when you notice slight odors at the end of flowering, even with the extractor running at full power. The activated carbon gradually saturates and loses its adsorption capacity. If you grow continuously, note the installation date and plan to replace it after a maximum of 20 months to avoid unpleasant surprises.
How to maintain the pre-filter of a PRO Range carbon filter to extend its performance?
Wash the pre-filter every 4-6 weeks with lukewarm water and a little detergent, without fabric softener which could leave residues. Let it dry completely before putting it back – a damp pre-filter promotes mold. Gently vacuum the outside of the filter every 2 months to remove accumulated dust. A well-maintained pre-filter can extend the life of the activated carbon by an additional 6 months.
Does a PRO Range filter eliminate all odors during the flowering phase in a medium-sized grow space?
Yes, a correctly sized PRO Range filter eliminates 99.5% of odors even during peak flowering. In a 1x1m or 1.2x1.2m space with an appropriate extractor, you should not smell anything outside. Efficiency depends on proper sizing: the extractor's airflow should not exceed the filter's nominal capacity. If you still smell odors, check the seals of the connections and ensure the pre-filter is not clogged.
