Question 1

Is it possible to manage the growth and flowering phases differently in the Hydro Shoot 100, for example by using extraction and intake socks to create distinct zones with conditions suited for each phase?

Accepted Answer

It is entirely possible to manage the growth and flowering phases separately in the Hydro Shoot 100x100x198 cm Version 2 by using extraction and intake socks to create distinct zones. These socks are designed to optimize ventilation and allow for segmenting the space, thus providing conditions suitable for each stage: a specific temperature, humidity, and lighting for growth on one side, and other adjustments for flowering on the other.For example, you can install lighting more suited for vegetative growth in one area, while the other focuses on a spectrum that promotes flowering. This system allows you to make the best use of the space and offer an optimal environment for each phase.For precise adjustments, it is useful to have a good grasp of the parameters of each zone (ventilation, lighting, humidity), but the structure of the Hydro Shoot 100 clearly facilitates this differentiated management.

Question 2

What is the humidity management capacity of the Secret Jardin Hydro Shoot 100 when using a hydroponic system?

Accepted Answer

The Secret Jardin Hydro Shoot 100 growing chamber is designed to provide a stable and controlled environment, with a Mylar reflective lining ensuring 98% lightproofing. This facilitates the control of temperature and humidity, two essential parameters in hydroponics. However, it does not have a specific integrated system for automatic humidity management. To accurately control this aspect, it is recommended to use dedicated accessories such as a humidifier or a dehumidifier, depending on the needs of your hydroponic cultivation. This approach allows for optimal balance, as humidity regulation is crucial for the health of plants in a hydroponic environment.

Question 3

Do the extraction and intake socks allow for easy connection to a standard odor filtration system?

Accepted Answer

The extraction and intake socks of the Hydro Shoot 100x100x198 cm Version 2 tent are designed to easily accommodate standard ventilation ducts, allowing for easy connection to a common odor filtration system. Whether you use an activated carbon filter or a classic-sized extractor (100 to 150 mm in diameter), compatibility is ensured. Additionally, if you need a precise fit, adaptation kits are available to facilitate assembly. Thus, this tent offers perfect flexibility to integrate a suitable filtration system for your indoor cultivation.

Question 4

Are silent extractors compatible with the steel structure of the Hydro Shoot 100x100x200 chamber for use in an apartment?

Accepted Answer

The Hydro Shoot 100x100x198 cm Version 2 grow tent is perfectly compatible with silent extraction systems designed to limit noise and vibrations, which is ideal for apartments. Its robust steel structure allows for the easy installation of extractors with a diameter of 100 to 150 mm, including compact and silent models equipped with carbon filters to control odors.We recommend prioritizing a fan with sound insulation and anti-vibration features to ensure effective and discreet ventilation, perfectly suited for the home environment. This way, you can enjoy comfortable indoor cultivation without excessive noise disturbance.

Question 5

What adjustments do you recommend to manage growth and flowering separately in this Hydro Shoot 100 room in terms of ventilation and lighting?

Accepted Answer

To manage growth and flowering separately in the Hydro Shoot 100x100x198 cm chamber, it is essential to adjust the ventilation and lighting for each phase: Ventilation: use the extraction and intake socks to create distinct zones, allowing precise control of temperature and humidity according to the development phase. Also, make sure to fully utilize both 180 mm openings to ensure good air circulation and avoid stagnation and excess humidity. Lighting: for growth, favor a more intense blue spectrum, then switch to a warmer red spectrum for flowering. The intensity should also evolve: for example, lighting equivalent to an HPS 400 W or two 200 W LEDs each provides good coverage. Remember that the 98% reflective Mylar internal coating maximizes light efficiency. Finally, adjust temperature and humidity with appropriate equipment for each phase to ensure an optimal environment.

Question 6

What is the best method to organize multiple varieties in the Hydro Shoot 100 while optimizing air circulation and light distribution?

Accepted Answer

To organize multiple varieties in the Hydro Shoot 100x100x198 cm Version 2 box while optimizing air circulation and light distribution, it is essential to intelligently segment the interior space. Create distinct zones using ventilation sleeves to adapt temperature, humidity, and light to each variety or stage of growth. The box integrates 180 mm inlet and outlet vents that facilitate efficient air renewal. Position them to ensure a uniform flow and avoid stagnant areas. The use of sleeves also allows for precise air direction, limiting undesirable mixing between zones. For light, take advantage of the high reflectivity of the Mylar walls (98%) and install multiple light sources tailored to specific needs: blue spectrum for growth, red for flowering. Hang the lamps at different heights for optimized lighting based on the development of each plant. This setup guarantees a controlled microclimate and effective cultivation, even with multiple varieties in this compact space.

Question 7

Is it possible to integrate a network-connected temperature and humidity sensor for remote monitoring in the Hydro Shoot 100 chamber without compromising the airtightness and airflow management?

Accepted Answer

It is entirely possible to integrate a network-connected temperature and humidity sensor inside the Hydro Shoot 100x100x198 cm chamber, provided that you proceed with care. To avoid compromising airtightness and airflow management, it is recommended to pass the cables through the existing ventilation openings or through waterproof cable passes without piercing the mylar coating or the aluminum structure.To limit risks, prioritize a wireless sensor with long autonomy, positioned inside without unnecessarily opening the tent. Also, ensure that the sensor does not obstruct the vents or ventilation socks, to preserve optimal air circulation.This approach requires a bit of care and DIY with suitable materials, but it allows for precise remote monitoring without altering the performance of your growing chamber.

Question 8

What is the recommended maximum autonomy for the integrated extraction system to maintain an optimal humidity level in the Hydro Shoot 100 chamber of 100x100x200 cm without negatively impacting the indoor temperature?

Accepted Answer

For the Hydro Shoot 100x100x198 cm Version 2, the integrated extraction system (Prima Klima fan 280 m³/h) should operate intermittently to maintain an optimal humidity level, generally between 40 and 60%, without disturbing the indoor temperature. It is recommended to adopt a cyclical extraction, for example in intervals of 15 to 30 minutes depending on hygrometry measurements, to avoid excessive cooling or abrupt thermal variations. Using a hygrometer-thermometer with automatic control is ideal for precisely adjusting this frequency. This intelligent management ensures efficient air circulation while maintaining stable temperature and optimal growing conditions, thanks also to the Mylar coating that maximizes light reflection and limits condensation.

Question 9

What is the best way to organize several varieties in the Hydro Shoot 100 grow tent to optimize space while avoiding interference between plants in terms of light and ventilation?

Accepted Answer

To organize several varieties in the Hydro Shoot 100x100x198 cm Version 2 and optimize space while avoiding interference between plants, it is wise to segment the tent into distinct zones using the air openings. This separation allows for the creation of microclimates tailored to the specific needs of each variety, particularly in terms of light and ventilation. The highly reflective Mylar lining distributes light evenly, but it's important to position the lights according to each plant's requirements by adjusting the spectrum and intensity. To prevent certain plants from being shaded or overheating, you may also install removable partitions or opaque fabrics to isolate light and humidity between the sections. For ventilation, take advantage of the "extraction and intake socks" to manage ventilation in a differentiated manner, ensuring a stable environment without stagnant air zones. Be sure to group plants with similar needs in the same area to facilitate maintenance and control of humidity and temperature. Finally, feel free to adjust the layout as the plants grow to avoid crowding and ensure optimal light exposure for each variety.

Question 10

Is the Hydro Shoot 100 room easily adaptable for a complete hydroponic system with integrated reservoirs and pump without losing growing space?

Accepted Answer

The Hydro Shoot 100x100x198 cm Version 2 is perfectly suited to accommodate a complete hydroponic system with integrated reservoirs and pump. Thanks to its generous height (198 cm) and modular design, it is possible to install these equipment at height, which fully preserves the ground area dedicated to plants. Its robust structure and well-thought-out air intakes also facilitate optimal space organization and effective ventilation. Thus, you benefit from a compact but functional growing space, ideal for well-organized hydroponics without significant loss of space.

Question 11

What is the optimal light power for a 100x100x200 space with Hydro Shoot version 2?

Accepted Answer

For a growing space of 100x100x198 cm with the Hydro Shoot Version 2 box, the optimal light power is about 400 W with HPS lamp. This level of lighting ensures efficient growth and flowering, while benefiting from the 70D Mylar internal coating that reflects nearly 95% of the light, ensuring uniform and maximum distribution over your plants. This combination optimizes electrical consumption and limits heat while providing powerful lighting suitable for this compact volume. If you opt for LED lighting, an equivalent power around 400 W is also recommended to maintain these optimal conditions.

Question 12

What is the practical interest of intake and exhaust socks for creating distinct cultivation zones in this Hydro Shoot 100 room?

Accepted Answer

The intake and exhaust socks in the Hydro Shoot 100x100x198 cm Version 2 allow for the creation of distinct cultivation zones by optimizing ventilation. They segment the space to separately manage temperature, humidity, and lighting suited to each growth phase, for example, growth on one side and flowering on the other. This organization provides precise control over environmental conditions, maximizing plant performance according to their development stage. Combined with the reflective coating and integrated ventilation of the tent, they ensure a stable and well-ventilated environment, ideal for productivity and quality of crops.

Question 13

What solution do you recommend to optimize air circulation without increasing heat in this compact Hydro Shoot 100 room?

Accepted Answer

To optimize air circulation in your Hydro Shoot 100x100x198 cm Version 2 without increasing heat, it is essential to use the reflective socks provided on the air inlets and outlets. They ensure good airflow while blocking light and stabilizing the indoor temperature. Next, equip yourself with a powerful extractor fan with a flow rate of at least 150 CFM, preferably a low-thermal emission model. For precise ventilation control, opt for a system with electronic flow regulation, allowing for fine adjustment of extraction according to needs. Finally, avoid multiplying or overly restricting openings with deflectors, which can drastically reduce flow and promote heat. This approach ensures effective ventilation while maintaining a stable temperature in your cultivation room.

Question 14

What airflow power do you recommend to maintain optimal VPD in this Hydro Shoot 100 grow tent, knowing it supports a 400W HPS and has extraction and intake socks?

Accepted Answer

For the Hydro Shoot 100x100x198 cm Version 2 grow tent equipped with a 400W HPS lamp and with extraction and intake socks, it is advised to opt for an air extractor with a power between 100 and 150 m³/h. This flow rate allows for optimal air exchange (30 to 40 times the volume per hour) to effectively control the temperature and humidity, essential conditions to maintain an ideal VPD.The socks ensure a uniform air distribution, thus enhancing the effectiveness of the chosen ventilation. This combination guarantees a healthy climate conducive to the growth and development of your plants.

Question 15

What is the maximum load limit for hanging an upgraded LED lighting system in the Hydro Shoot 100 chamber?

Accepted Answer

The maximum load limit for hanging an upgraded LED lighting system in the Hydro Shoot 100x100x198 cm Version 2 box is 5 kg per suspension kit. This recommendation ensures the safety and stability of your lighting.The steel frame of the tent can support a total load of about 15 kg, but for the lighting, it is advisable not to exceed 5 kg per suspension to preserve the durability and longevity of the equipment.

Question 16

What solution do you recommend to effectively limit the heat generated by a 400W HPS in the Hydro Shoot 100 chamber without compromising air circulation and yield?

Accepted Answer

To effectively control the heat from a 400W HPS in the Hydro Shoot 100x100x198 cm Version 2 without harming air circulation or yield, the ideal solution combines several elements: A high-performance extraction system: use an extractor like the Prima Klima 280m³/h combined with a carbon filter to remove hot air. The entry and extraction socks facilitate a constant and well-controlled airflow. An appropriate reflector: the included Euro Reflector optimizes light diffusion while dissipating heat directly around the lamp. Segmentation of the chamber using socks to create distinct zones, allowing local adjustment of temperature and humidity according to the growth phase. An internal oscillating fan to ensure regular air mixing, prevent heat pockets under the lamp, and maintain a homogeneous climate. This combination ensures an optimal environment for cultivation, with controlled temperature and efficient air renewal, thus maximizing the performance of the HPS lamp.

Question 17

What is the optimal fan power and carbon filter for a 100x100x200 space to ensure efficient extraction without overpressure in Hydro Shoot 100?

Accepted Answer

For the Hydro Shoot 100x100x198 cm Version 2, a minimum extractor fan of 300 m³/h is ideal to compensate for flow losses due to the carbon filter and the air inlet. The carbon filter should also be designed for a flow rate of at least 300 m³/h, thus ensuring effective extraction without creating overpressure. The 180 mm openings on the box facilitate installation and help maintain good pressure balance by ensuring optimal air flow. This configuration guarantees regular air renewal, limiting stagnation and excess humidity for a healthy and efficient indoor cultivation.

Question 18

How to optimize humidity circulation at night in the Hydro Shoot 100 to avoid condensation without losing energy efficiency?

Accepted Answer

To optimize humidity circulation at night in the Hydro Shoot 100x100x198 cm Version 2 and avoid condensation without spending more energy, you first need to use the extraction and intake socks provided. They ensure a homogeneous air flow and protect the indoor temperature. It is essential to install a suitable extractor fan, with a flow rate between 100 and 150 m³/h, which corresponds to about 30 to 40 air exchanges per hour. Prefer a model with low thermal emission and equipped with an electronic flow regulation system to perfectly adjust ventilation according to the night-time need. Avoid blocking or restricting air openings, as this disrupts flow and encourages humidity stagnation. If possible, segment the box into zones to create controlled microclimates, thereby optimizing humidity and temperature management. The Mylar fabric and the robust structure of the box also help stabilize temperature and limit condensation. In summary, controlled, well-calibrated ventilation and a constant air flow via the socks allow for effective humidity management at night without energy overconsumption.

Question 19

Does the Mylar 70D coating really stand the test of time without degrading or losing its reflective capacity after several growing cycles?

Accepted Answer

The Mylar 70D coating of the Hydro Shoot - 100x100x198 cm Version 2 grow tent is known for its high durability and stable reflective capability over time. With a light reflection of about 95%, this Mylar offers excellent light distribution, essential for optimal growth. Thanks to its thickness greater than that of classic Mylar 50D, this material retains its strength and effectiveness even after several growing cycles, without any notable loss of reflective capacity or degradation. It is a safe choice for prolonged indoor use.

Question 20

How to quickly install the Hydro Shoot 100?

Accepted Answer

Assemble it in 15 minutes using the click system of the Ø19mm aluminum profiles: clip the tubes, attach the Mylar 70D fabric, and plug in the extraction socks. Ideal for beginners in compact indoor growing.

Waterproof	No
Thermal management	98%
Dimensions	100x100x198 cm
Growing area	1 m2
Weight (kg)	8
Mylar density	210D
Ventilation opening diameter (mm)	180
Number of openings	2
Max load (kg)	20
Tube diameter (mm)	16mm
Number of doors	1

Secret Jardin Hydro Shoot HS100 V2 – grow tent 100x100x198 cm

Choose your model

Highlights

Étanche

3 packs including this product

Choose your pack

Complete kit 100x100 cm – Lumatek ATS 300 PRO + Hydro Shoot 100 + ventilation kit without carbon filter + pots and soil

Complete pack 100x100cm – SpectraWild S320 - Hydoshoot 100 - Ventilation kit without carbon filter - Pots and potting soil

Complete pack 100x100cm – Zeus 465 - Box Hydroshoot 100 - Ventilation kit without carbon filter - Pots and potting soil

Product presentation

Modular and Waterproof Grow Tent with 210D Mylar for Hydroponics

Explosive Growth in a Compact Space

Exceptional Robustness and Ease of Assembly

Compatible with Your Advanced Cultivation Systems

How to Use Your Hydro Shoot 100x100x198?

Features detailed

Reviews customers

Super qualité. Fonctionne

Après quelques jours d'utilisation

Reçu rapidement, bien

Bon rapport qualité-prix

Merci

Ça marche super

Your questions

Viewed recently

Write your review