01 — Description
Présentation du produit
Introduction
The HLG 200 RSPEC is a high quality LED panel designed for indoor growing. It is manufactured by the HLG company, which specializes in the production of LED lighting systems for plants. This LED panel is equipped with high-power LEDs and features RSPEC technology which optimizes the light spectrum.
Technical characteristics
Light power and intensity
This LED panel produces a light intensity of 650 umol/s, making it ideal for indoor plant growth and flowering.
Lifetime
The HLG 200 RSPEC is designed to last a long time, with an average lifespan of 50,000 hours.
Advantages of the HLG 200 RSPEC
Energy savings
The HLG 200 RSPEC is an economical choice for indoor growing. It consumes approximately 200 watts of electricity, much less than traditional HID lamps. Additionally, it does not produce excessive heat, allowing you to reduce air conditioning costs.
Versatility
The HLG 200 RSPEC is suitable for growing and flowering all kinds of plants indoors, including herbs, vegetables, fruits, flowers and houseplants. Thanks to its RSPEC technology, it offers optimal performance for all stages of plant growth.
Ease of use
The HLG 200 RSPEC is easy to install and use. It is equipped with adjustable hooks for easy installation in all types of grow tents. Additionally, it does not require external ballasts or other complicated equipment, making it simpler to use for indoor growing beginners.
Main features
- Dimmer included
- Samsung LM301H High Efficiency LED with Deep Red
- White Light Full Spectrum for Vegetables and Flowering
- Reliable passively cooled design
Features
| Power | 196 watts |
| AC voltage range | 240 VAC |
| LED | LM301H + 660nm Deep Red |
| PPF efficiency of the system | 2.52 μmol/joule |
| Total output | 495 PPF |
| Dimensions | 50.8 x 33.02 x 2.54 cm |
| |
04 — Questions sur ce produit
Product questions
Your questions about this product
- Can the HLG 200 Rspec be easily synchronized via DMX for dynamic lighting complementary to my sound plant installations?
The HLG 200 Rspec is not natively compatible with the DMX protocol, so it cannot be easily synchronized for dynamic lighting associated with a sound plant installation. This model only has a manual dimmer to adjust intensity, without a DMX interface. For dynamic DMX lighting, it is better to use projectors designed for this or a separate lighting system.
- The HLG 200 RSPEC panel appears to be efficient and economical, but is there a risk that its passive cooling might limit its durability in a confined space without optimal ventilation?
The HLG 200 RSPEC is a highly efficient LED panel designed for passive cooling thanks to its large heat sink, which avoids noise and mechanical failures. However, in a confined space without sufficient ventilation, the natural heat dissipation can become challenging. This accumulation of heat may increase the operating temperature, which can eventually reduce the durability of the LEDs and electronic components.
- Is the HLG 200 RSPEC optimal for micro-cultivation on a 60x60 cm surface in terms of light coverage and energy efficiency?
The HLG 200 RSpec is perfectly suited for micro-cultivation on a 60x60 cm surface. Its recommended coverage of 60x60 cm ensures uniform and sufficient light for optimal plant development.In terms of energy efficiency, this panel operates at 196 watts and generates about 495 micromoles per second, with a remarkable efficiency of 2.52 micromoles per joule. This performance allows for maximizing growth while limiting electrical consumption.Thanks to its Samsung LM301H LEDs complemented by Deep Red LEDs, it delivers a complete spectrum ideal for all growth phases, from vegetation to flowering. Its passive design also ensures a long lifespan without additional noise.For efficient and quality micro-cultivation, the HLG 200 RSpec is an excellent choice, combining power, efficiency, and reliability.
- Optimal use of the HLG 200 RSPEC on multiple varieties in the same space: what is the best light arrangement and recommended installation height to optimize growth and flowering of plants with different needs under this LED panel?
To optimize the use of the HLG 200 RSPEC on multiple varieties with different light needs, here are the key recommendations:
Installation height: between 40 and 50 cm (16-20 inches) for flowering, ensuring a high light intensity ideal for stimulating flowering. For vegetative growth, prefer 60 to 75 cm (24-30 inches) to limit stress and provide suitable lighting.
Light arrangement: position the panel to evenly cover the area of the most light-demanding plants. Use the built-in dimmer to adjust the intensity according to the phase of each variety. Zoning with light-hungry plants close to the panel and the more sensitive ones on the periphery or farther away ensures tailored lighting.
This modular approach allows for optimal growth and flowering while respecting the specific needs of each variety in the same space.
- What rules or recommendations do you suggest for adjusting the height and duration of light exposure of the HLG 200 RSPEC to optimize growth and flowering in indoor cultivation?
To optimize growth and flowering with the HLG 200 RSPEC, hang it between 45 and 60 cm above the plants. This height prevents burning while ensuring good lighting. The light ideally covers an area of 2' x 2' to 2' x 3' in flowering.
Regarding the duration of exposure, it is advisable to provide 18 hours of light per day during the growth phase, then reduce to 12 hours for flowering. The HLG 200 RSPEC allows for intensity control, useful for adjusting light power according to the plant's stage, starting gentler for young seedlings.
Also, make sure to maintain the ambient temperature between 20 and 25°C and a balanced humidity level to promote healthy growth.
- Is it possible to integrate with a voice assistant to control the dimmer or the lighting schedules? Is temperature and humidity monitoring remotely integrable with this panel or is an external sensor needed? Can irrigation and lighting be automated with this model that is compatible with home automation or is it only a standalone system?
The HLG 200 RSPEC features a built-in dimmer that allows you to adjust light intensity manually or via a compatible controller, but it does not offer native compatibility with voice assistants (Alexa, Google Assistant) nor scheduling via home automation applications.
This panel does not have built-in sensors to measure temperature or humidity. Therefore, to monitor these parameters remotely, you will need to add suitable external sensors.
Regarding the automation of irrigation and lighting, the HLG 200 RSPEC primarily operates as a standalone system. To manage these functions automatically or via home automation, it is necessary to integrate compatible external modules, timers, or controllers.
In summary, this model is efficient and easy to use, but any advanced home automation function will require additional accessories.
- What is the actual electricity consumption of the HLG 200 RSPEC in continuous operation for 12 hours a day and its light output in umol per watt in a cultivation area of 1.5m by 1.5m?
The
HLG 200 RSPEC actually consumes 196 watts in continuous operation. Over 12 hours a day, this represents approximately
2352 watt-hours (or 2.35 kWh) of electricity used.
Its light output is very efficient, with about 2.53 µmol/joule. In more concrete terms, it delivers a light flux of 495 µmol/s for this consumed power. For a cultivation area of 1.5m by 1.5m, it can provide a light intensity of approximately 650 µmol/s, which is ideal for the growth and flowering of plants such as tomatoes, peppers, or herbs.
This panel is an excellent choice for effective and energy-efficient cultivation. If you would like to explore another option, I can present you with models suitable for your space.
- Can you connect two HLG 200 Rspec panels to a single timer for parallel cultivation without the risk of electrical overload?
It is entirely possible to connect two HLG 200 Rspec panels to a single timer, provided that it supports the total load of approximately 392 watts. Make sure that the timer and the cables used are suitable for this power to avoid any risk of electrical overload. By following these precautions and ensuring a proper installation, your parallel setup will be secure and effective for your indoor cultivation.
- What is the optimal growing area to fully exploit the 196 watts of the HLG 200 RSPEC indoors to optimize yield and electricity consumption?
To fully utilize the 196 watts of the
HLG 200 RSPEC indoors, the optimal growing area is about
60x60 cm. This size allows for an excellent balance between yield and electricity consumption.
To maximize efficiency, it is recommended to hang the panel between 40 and 50 cm above the plants during flowering, and between 60 and 75 cm during the growth phase. You can sometimes extend the coverage up to 2’ x 3’ by adjusting the height, but keep in mind that the light density will be lower.
The HLG 200 RSPEC features Samsung LM301H and Deep Red LEDs that provide a full spectrum, ideal for all stages of growth, ensuring efficient and high-performance use.
- Is it possible to use this HLG 200 RSPEC panel to grow two different crops in parallel with a single light management system, or do I need a separate timer for each crop?
The HLG 200 RSPEC panel is designed as a single unit and cannot be divided to manage two different light cycles simultaneously. If you wish to grow two plants with distinct photoperiods, you will necessarily need one panel per crop, each controlled by an independent timer.
In summary, with a single HLG 200 RSPEC, only one lighting cycle can be managed. For independent management, it is essential to have multiple panels and suitable timers.
- HLG 200 RSPEC: Is the light output at 196W confirmed at around 650 umol/s on the active surface, or is it rather the announced 495 umol/s total PPF?
The light output of the HLG 200 RSPEC at 196W is confirmed at around 495 umol/s total PPF. The value of 650 umol/s on the active surface is not substantiated. This figure of 495 umol/s reflects the total amount of photosynthetically active photons emitted by the lamp at full power, which corresponds to the most reliable specifications for this model.
- PPF system announces 2.52 umol/joule on HLG 200 RSPEC, what is the actual power consumption measured in watts to confirm the efficiency g/watt in the field?
The HLG 200 RSPEC consumes approximately 196 watts at maximum operation. With a PPF of 495 μmol/s and an efficiency of 2.52 μmol/joule, this confirms an efficiency of about 2.52 μmol per watt. To achieve a yield in grams per watt, it is necessary to measure the actual growth of your plants under this panel, as this data highly depends on the growing conditions.
- Is the HLG 200 RSPEC really easy to install for a beginner? Does the built-in dimmer make controlling the lumen output easier?
The HLG 200 RSPEC is indeed very easy to install, even for a beginner. It comes with adjustable hooks that easily fit different tent sizes and does not require an external ballast, which reduces complexity.
Moreover, it features a dimmer to adjust the light intensity according to your plants' needs. This direct adjustment facilitates controlling the lumen output, allowing you to precisely adapt the lighting to the different growth phases, a real plus for controlled cultivation right from the start.
- What feedback do you have on the long-term reliability of Samsung LM301H LEDs in this HLG 200 RSPEC panel? Does the dimmer really last for years without defects?
The HLG 200 RSPEC panel uses Samsung LM301H LEDs known for their excellent long-term reliability and efficiency, especially due to a passive design ensuring proper heat dissipation without a fan. This design limits mechanical risks and ensures great longevity, provided there is minimal ventilation around the panel to avoid overheating.
Regarding the dimmer, it is of professional quality, designed to last for several years. Its operation without forced air circulation also limits heat-related wear. Although precise feedback over several years is not abundant, the robustness of the system is proven.
In summary: well-ventilated, the HLG 200 RSPEC offers a durable performance for both its Samsung LM301H LEDs and its integrated dimmer.
- What is the maximum effective area with HLG 200 RSPEC for optimal yield in indoor cultivation? Actual consumption vs classic HID?
The HLG 200 RSPEC is ideal for efficiently lighting an area of 0.37 to 0.56 m² (approximately 2 feet x 2 feet to 2 feet x 3 feet) during the flowering phase, for optimal yield. The panel should be suspended between 45 and 60 cm above the plants to ensure good light intensity without risk of burning.
In terms of consumption, the HLG 200 RSPEC uses about 196 W actual, which is significantly more economical than a classic HID lighting that would consume between 250 and 400 W for a comparable area and light output. With a light efficiency of 2.52 μmol/joule, it delivers superior light output per watt consumed, thus ensuring a more productive and energy-efficient cultivation.
- Does the HLG 200 RSPEC fit for a growing space of 80x80 cm with a silent extractor to avoid overheating?
The HLG 200 RSPEC is perfectly suited for a growing space of 80 x 80 cm. Its power of 196-200 watts and optimized spectrum ensure uniform and effective lighting across this area, both in growth and flowering.
Regarding heat, this model generates less heat compared to traditional lamps, but in a closed space like yours, using a silent extractor is wise to avoid any overheating and to ensure an optimal environment for your plants.
In summary, this panel combined with a silent ventilation system is an excellent choice for your indoor cultivation.
- What is the practical difference in terms of yield between the HLG 200 RSPEC panel and a traditional CMH or MH model for indoor hydroponic cultivation?
The HLG 200 RSPEC panel offers superior yield efficiency compared to traditional CMH or MH models, especially in indoor hydroponics. With a light output of about 495 µmol/s for only 196 watts, it achieves a high energy efficiency of 2.52 µmol/joule, well above the usual 1.5-1.9 µmol/joule of CMH/MH lights.
This better efficiency translates concretely to:
- Reduced electricity consumption for the same light intensity, leading to a lower electricity bill.
- An optimized spectrum thanks to RSPEC technology, promoting more uniform and vigorous growth and flowering.
- Lower heat dissipation, making it easier to maintain a stable and suitable temperature for roots in hydroponics.
- A longer lifespan (~50,000 hours) and simplified installation without an external ballast.
In summary, choosing the HLG 200 RSPEC for indoor hydroponic cultivation means opting for efficient, economical lighting that better meets the needs of plants compared to traditional CMH or MH lamps.
- Can the HLG 200 RSPEC be used with separate timers for two crops to optimize light management between growth and flowering?
The HLG 200 RSPEC can be perfectly used with separate timers to manage two distinct crops, thus optimizing the growth and flowering cycles. Each lamp must be connected to its own timer to independently control the lighting duration suitable for each phase.
Additionally, the HLG 200 RSPEC includes a manual dimmer allowing adjustment of light intensity, but this setting is not programmable via timer. Multi-phase automatic management is not integrated, so you will need to control the light cycles solely via external timer.
This is a flexible and reliable solution to optimize your indoor crops with horticultural LED lighting.
- Does it include a communication protocol for monitoring temperature and power consumption remotely via local network or cloud?
The HLG 200 RSPEC is a high-performance horticultural LED lighting equipped with a built-in dimmer and compatible with certain external controllers. However, it does not have a native communication protocol for remotely monitoring temperature or power consumption via local network or cloud. For these functionalities, additional control and monitoring solutions, compatible with your specific needs, will need to be considered.
- What is the ideal growing area in m² for the HLG 200 RSPEC to optimize growth and flowering without exceeding its maximum power?
The HLG 200 RSPEC is ideal for a growing area of about 0.36 to 0.56 m², which corresponds to a space between 60x60 cm and 60x90 cm. This range allows for the optimization of growth and flowering without exceeding the maximum power of 196 watts or wasting energy.
For even and effective light, it is advised to hang the panel between 40 and 50 cm above the plants during flowering, and a bit higher (60 to 75 cm) during the vegetative growth phase. This setup ensures optimal light intensity and healthy plant development.
- What is the actual electric consumption of the HLG 200 RSPEC in continuous operation for 1.5m² and its light output compared to conventional HID lamps?
The HLG 200 RSPEC consumes about 196 watts in continuous operation, which is suitable for a growing area close to 1.5 m². Over 12 hours of daily use, this represents about 2.35 kWh.
In terms of light output, this LED panel delivers approximately 495 µmol/s of active photons (PPF) with an excellent efficiency of 2.52 µmol per joule. This performance is significantly higher than that of conventional HID lamps (HPS or MH) which often consume 400 to 600 watts for a similar area and exhibit an efficiency of around 1.5 to 1.8 µmol/joule.
Additionally, the HLG 200 RSPEC heats much less, which limits the necessary ventilation and improves the overall efficiency of your setup.
In summary, this LED panel is both an economical and high-performing choice for indoor cultivation while maintaining controlled consumption and optimal lighting.
- What performance differences can I expect between this HLG 200 RSPEC panel and a classic non-RSPEC model for growth and flowering in indoor cultivation?
The HLG 200 RSPEC distinguishes itself from a classic non-RSPEC model by an optimized light spectrum, incorporating more deep red, ideal for stimulating both growth and flowering. This warmer spectrum promotes vigorous vegetative development as well as better floral production.
In terms of efficiency, the HLG 200 RSPEC delivers about 495 µmol/s with an output of 2.52 µmol/joule, higher than classic models which often range around 1.5 to 1.9 µmol/joule. This means more useful light per watt consumed, leading to a more efficient and productive cultivation.
Moreover, the light is distributed evenly over your growing space (approximately 80 x 80 cm), avoiding overly intense or weak areas and ensuring homogeneous plant growth.
Finally, this panel generates less heat, limiting thermal stress and facilitating climate management of your installation.
In summary, the HLG 200 RSPEC offers superior performance by providing more suitable and efficient lighting, and better uniformity, for visible results in both growth and flowering.
