Achat vérifié
J'utilise ce modèle régulièrement, il offre stabilité et silence. Idéal pour un espace restreint, il ne dérange pas.
- Low energy consumption
- High luminous efficiency
- Estimated lifetime of over 50,000 hours
- Passive cooling system
- Excellent value for money.
- Easy to install and operate, making it ideal for both novice and experienced growers.
Satisfait ou remboursé
14 jours
Retour 14 jours
Frais de retour à votre charge
SAV expert FR
Conseil horticole
Paiement en plusieurs fois
with Alma, from €50 — or pay in 15 days from €100
HLG 260 Rspec - LED KIT
351,48 €
Parraine tes proches
5 % pour toi & 5 % pour ton ami
Description
Product presentation
Introduction
The HLG 260 Rspec FR is a high-performance LED lighting system designed to optimize the growth and flowering of indoor plants. This product is developed by the Horticulture Lighting Group (HLG), a company known for its quality products in horticultural lighting.
Kit features
The HLG 260 Rspec FR is equipped with the following features:
Power
This LED lighting system offers 260 watts of power, covering an area of approximately 1.2 square meters. The energy consumption is relatively low compared to the power delivered.
Spectrum
The HLG 260 Rspec FR features high performance LEDs providing a full spectrum of light, suitable for all phases of plant growth and flowering. The spectrum includes a large amount of red and blue light, as well as white and green lights to improve overall light quality.
Efficiency
This LED lighting system is highly efficient, with a luminous efficiency of 2.6 µmol/joule. This means that each watt of electricity consumed produces 2.6 µmol of light, which is more efficient than many other horticultural lighting systems.
Lifetime
The HLG 260 Rspec FR is built to last, with an estimated life of over 50,000 hours. It can therefore be used for many years without needing to be replaced.
Cooling
The passive cooling system of the HLG 260 Rspec FR uses aluminum radiators to dissipate the heat generated by the LEDs. This cooling system is very efficient and quiet, which is ideal for indoor use.
Installing the kit
The installation of the HLG 260 Rspec FR is very simple and does not require any special technical skills. The kit comes pre-assembled, which means that all components are already assembled and ready to use. Simply hang the kit above the grow area using the cables included in the kit and plug it into a standard electrical outlet. The kit is equipped with a switch to turn the lighting on or off.
Conclusion
All in all, the HLG 260 Rspec FR is a high performance LED lighting system designed for indoor growers looking to optimize the growth and flowering of their plants. With high power and a full spectrum of light, it is an ideal choice for improving the quality and quantity of crops. If you are looking for such a product, the HLG 260 Rspec FR is a great option to consider.
Main Features
- QB272 High Efficiency Custom Quantum Boards
- Reliable passively cooled design
- Full Spectrum
- Ideal for flowering
- Extended cord for remote pilot mounting
- 240V power cord with Nema 5-15P plug
Features
Power | 260 watts |
Spectrum | Full spectrum white, deep red and blue |
Recommendation | Not recommended for vegetables |
Technical data sheet
Features detailed
| Thermal management | Passive |
|---|---|
| Format | Kit |
| Growing area | 1.2 |
| Efficacy (µmol/J) | 2.6 |
Convinced? Shipped from France. Add to cart — 351,48 €
They've adopted it
Reviews customers
Achat vérifié
Franchement bluffé par
Franchement bluffé par la qualité. Livraison rapide. Vraiment pas déçu.
Achat vérifié
Produit de qualité
Produit de qualité, livraison rapide. Les résultats sont au rendez-vous. Merci beaucoup.
Aucun avis ne correspond à ce filtre.
Frequently asked questions
Your questions
Hello GrowLED, is this HLG 260 Rspec kit easy to install for a beginner like me who wants to introduce my son to indoor gardening? And is the brightness adjustable to protect his eyes?
The HLG 260 Rspec kit is very simple to install, it comes pre-assembled: you just need to hang it with the supplied cables and plug it in, perfect for starting indoor gardening with your son. Regarding brightness, it is not adjustable on this model, you just need to avoid looking directly at the light to protect the eyes. You can also complement with appropriate protective glasses if necessary.
Is it recommended to use the HLG 260 Rspec kit to promote the flowering of my Phalaenopsis, and is this deep red and infrared spectrum well suited to their specific needs?
The HLG 260 Rspec kit is indeed designed to promote flowering thanks to a spectrum rich in deep red (660 nm) and infrared (730 nm). For Phalaenopsis, this spectrum can stimulate their flowering, as these orchids benefit from a good balance between blue and red light.
However, it is recommended to use this kit mainly during the flowering phase and to avoid exposing young plants or those in the vegetative growth phase to it, as it may trigger premature flowering.
If you want to see it on our website, here is the product page for the HLG 260 Rspec.
Can this HLG 260 Rspec kit be integrated into an existing home automation system to automate the light intensity according to the growth cycles defined by a voice assistant or a third-party platform?
The HLG 260 Rspec kit has external dimming options that allow you to control the light intensity via a compatible device. To integrate this panel into a home automation system and automate the lighting according to cycles defined by a voice assistant or third-party platform, you will need to use a controller capable of managing these functions (e.g., Zigbee module, Wi-Fi, or other gateway depending on your setup). This means that with a bit of additional hardware and a suitable configuration, you can perfectly control your horticultural lighting from Alexa, Google Assistant, or a home automation platform like Home Assistant, synchronizing the growth phases to your needs. If you are looking for a more integrated control system, we also offer compatible accessories that can facilitate this automation.
What is the ideal dimming range to optimize vegetative growth before switching to full power during flowering with this HLG 260 Rspec?
To optimize growth during the vegetative phase with the HLG 260 Rspec, it is advisable to start with a fairly gentle dimming level, around 40-60% of maximum power. This allows the plants to adapt without significant light stress. Then, you can gradually increase the intensity until reaching full power for the flowering phase, where high intensity is beneficial for flower development.
This panel offers great flexibility thanks to its external dimming system, allowing you to precisely adjust the light according to your plants' stage and needs.
This panel offers great flexibility thanks to its external dimming system, allowing you to precisely adjust the light according to your plants' stage and needs.
What is the optimal yield in grams per square meter with the HLG 260 Rspec kit in a 60 by 120 cm growing box for several varieties at the same time, and how to adjust the dimmable light intensity to optimize flowering without stress for each variety?
Optimal yield: With the HLG 260 Rspec kit in a 60 x 120 cm box (0.72 m²), you can expect a realistic yield of around 70 to 100 grams per square meter, depending on the varieties and growing conditions. This 260 W panel offers a complete spectrum ideal for all growth and flowering phases.
Dimmable intensity adjustment: To grow multiple varieties together without stress, start flowering at around 60-70% of maximum power to protect sensitive plants. Then gradually increase the intensity to 90-100% during mid-flowering, keeping a height of at least 38 cm above the plants. This gradual increase allows you to match the light to each variety's specific tolerance, promoting optimal flowering.
This progressive method, combined with good plant spacing, will ensure great uniformity and excellent development despite varietal diversity while optimizing photosynthesis and flower production.
What are the concrete advantages of differential light intensity management with the external dimmer on the HLG 260 Rspec kit during the growth and flowering phases?
The external dimmer of the HLG 260 Rspec kit allows for precise adjustment of light intensity according to the growth phases:
During growth, it reduces light to limit plant stress, prevent burns, and save energy, promoting healthy development especially in tight spaces. During flowering, it gradually increases intensity to stimulate the production of flowers and fruits while maintaining an optimal distance to avoid damage.
This personalized adjustment also helps to adapt the light according to plant size, variety, and environment, preventing overheating and excess light. Finally, the dimmer is easy to use, with no need for specific tools, and compatible with standard household installations.
In summary, this differentiated management optimizes yield and quality while offering flexibility and protection for your crops.
What difference in yield can I expect between this HLG 260 Rspec and a classic LED lamp of the same power during flowering?
The HLG 260 Rspec stands out from a classic LED lamp of the same power due to its superior light efficiency, with about 2.6 µmol/joule compared to 1.5 to 2.0 µmol/joule. This results in a photon yield 20 to 40% higher, directly beneficial for photosynthesis during flowering.
Its full spectrum, specially enriched in deep red (660 nm) and far red (730 nm), is designed to maximize floral development, offering better quality and quantity of flowers. Additionally, its passive thermal dissipation enhances its reliability and stability over the long term.
In summary, you can expect significantly higher floral production with the HLG 260 Rspec compared to a classic 260 W LED, thanks to spectrum optimization and better energy efficiency.
hlg 260 rspec really effective in combination scrog under led to optimize flowering on 60x120 cm with external intensity control
The HLG 260 Rspec is perfectly suited for SCROG cultivation on 60x120 cm. Its 260 watts of power combined with a full spectrum, including red and far red, promotes optimal flowering. Its coverage of about 1.2 m² is close to your surface, and with a good height adjustment, the light will be well distributed across your screen. The external intensity control allows you to precisely adjust the lighting according to your plants' needs, which is a real advantage for fine-tuning the flowering phase.
Is integration possible with home automation management systems via standard protocols such as Zigbee or ZWave to automate lighting and dimming according to growth cycles?
The HLG 260 Rspec - LED KIT does not have native compatibility with standard home automation protocols such as Zigbee or ZWave. Lighting and dimming are usually managed through manual control or an external dimmer, as the product is designed with physically accessible intensity adjustment options.
For full automation via a home automation box, it would be necessary to integrate a third-party controller capable of driving the lighting system, but this requires specific installation and is not directly provided in this kit.
What is the difference in noise level with a traditional fan system? Does the passive cooled design completely eliminate noise without risk of overheating?
The HLG 260 Rspec - LED KIT uses passive cooling without fans, making it completely silent compared to traditional systems that are often noisy (30 to 50 dB). This design eliminates the noise generated by fans and reduces the risk of mechanical failure.
However, to avoid any risk of overheating, it is essential to install this panel in a well-ventilated space to ensure proper natural heat dissipation. This way, you can enjoy a high-performing and peaceful cultivation experience with quality horticultural LED lighting.
Is the HLG 260 Rspec really optimal for a 60x120 cm SCROG setup under LED in terms of light penetration and spectrum uniformity for the flowering phase?
The HLG 260 Rspec LED KIT is perfectly suited for a 60x120 cm SCROG setup during the flowering phase. Its power of 260W combined with its full spectrum, including deep red (660nm) and far red (730nm), effectively promotes flowering and fruiting.
In terms of light penetration, Quantum Boards® diffuse intense and homogeneous light, sufficient for a SCROG with a canopy height of 30-40 cm. Even though their penetration is slightly less deep than some LED bars or HPS/CMH lamps, it remains optimal for this type of home installation.
The spectrum uniformity is excellent, ensuring homogeneous coverage without hot spots, which is crucial to maximize the yield of a scroged canopy.
Finally, the kit is specifically designed for a surface close to 60x120 cm, ensuring balanced and efficient light distribution.
In summary:
- Sufficient light penetration suitable for SCROG.
- Full and uniform spectrum, ideal for flowering.
- Perfect size for 60x120 cm.
Is the power of 260 watts and the area of 60x120 cm ideal for a first indoor flowering crop to maximize yield without consuming too much electricity?
The HLG 260 Rspec - LED KIT with its 260 watts is perfectly suited for an indoor flowering crop in an area of about 60x120 cm. Its power allows for maximizing yield without excessive electricity consumption, offering an excellent efficiency-to-consumption ratio.
Its full spectrum, including deep red and white LEDs (660 nm and 730 nm), is specially optimized to stimulate vigorous flowering. Moreover, its passive cooling system and long lifespan ensure a reliable and economical solution in the long run.
For a first crop, it is a wise choice that combines performance and energy efficiency, ideal for achieving beautiful harvests without complexity.
What is the optimal HLG 260 Rspec size for a micro box to maximize yield without excessive electrical consumption?
The HLG 260 Rspec is ideal for a micro box of approximately 60 x 120 cm (2' x 4') to maximize yield without excessive electrical consumption. Its 260 W consumption combined with high light efficiency ensures powerful and targeted lighting for the flowering phase.
To optimize its performance, place it about 38 cm above the plants and use a closed space to promote light reflection. This setup minimizes energy losses while avoiding thermal stress, ensuring harmonious growth.
What is the average operating temperature of the HLG 260 Rspec kit at full power without active ventilation?
The HLG 260 Rspec - LED KIT features very effective passive cooling thanks to its aluminum heat sinks. This helps to maintain a stable temperature without active ventilation, ensuring quiet and reliable operation. However, no precise data on the average temperature at full power without ventilation is officially provided. Nevertheless, based on the quality of the system, we can affirm that heat is effectively dissipated, preventing any overheating.
What is the actual electrical consumption for a 60x120 cm grow with HLG 260 Rspec and yield in grams per watt?
For an indoor cultivation area of 60x120 cm, the HLG 260 Rspec consumes approximately 260 watts at nominal operation. This kit is designed to cover up to 1.2 m², thus providing generous light power for 0.72 m².
Regarding the yield, with a high light efficacy of 2.6 µmol/joule, this type of LED generally allows to achieve between 1.2 and 1.5 grams per watt under optimal growing conditions. This represents a potential production between 312 and 390 grams with 260 W of consumption.
This model balances power and consumption very well, ideal for a medium space seeking high energy efficiency.
Is it possible to integrate this HLG 260 Rspec kit into a home automation system to automate and program the light intensity based on the growth phases and receive alerts in case of overheating or failure?
The HLG 260 Rspec - LED KIT offers an external dimming function, which allows you to program and automate the light intensity via a compatible home automation controller. However, it does not have a built-in home automation interface or onboard sensors for overheating or failure detection.
To receive alerts and ensure complete monitoring, it is therefore necessary to connect additional home automation devices such as temperature sensors or smart plugs, associated with a home automation hub capable of managing this data.
In summary, this kit can perfectly integrate into a home automation system to control brightness, but alert management requires additional equipment.
What is the real impact of the 730nm infrared spectrum of the HLG 260 Rspec on a LED SCROG setup in a 60x120 cm space, and does the external dimmer allow for fine adjustment of light intensity according to growth phases in practice?
The 730nm infrared spectrum of the HLG 260 Rspec is a valuable asset in SCROG on a 60x120 cm space. It promotes flowering by simulating late-day light, enhances foliage spread under the screen, and optimizes plant maturation through better phytochrome management.
As for the external dimmer, it allows for fine and gradual adjustment of light intensity, perfectly suited to the changing needs of growth and flowering phases. This modulation ensures optimal lighting without stress for the plant, a real advantage for mastering SCROG with precision.
What is the difference in yield between the HLG 260 Rspec and a classic LED kit of the same power in a 60x120 cm area during flowering?
The HLG 260 Rspec stands out from a classic LED kit of the same power by an efficiency of about 2.6 µmol/joule, which is significantly higher than the usual 1.8 to 2.3 µmol/joule. This performance results in better spectrum penetration and optimization of the light spectrum, with deep white and red LEDs specifically calibrated for flowering.
On a surface of 60 x 120 cm, this provides a yield increase of 15 to 30% compared to classic kits, thanks to more effective light and passive heat dissipation reducing losses. In practice, this means a better-exploited cultivation and a more substantial production under these conditions.
HLG 260 Rspec, is this complete red_ir spectrum optimal for a scrog combined with lst under 260w led in a 60x120 cm?
The HLG 260 Rspec is perfectly suited for your area of 60x120 cm with a SCROG technique combined with LST. Its full spectrum, rich in deep red (660 nm) and far red (730 nm), promotes optimal flowering while ensuring excellent vegetative development thanks to the white and blue LEDs.
With its 260 W and high light output, it offers powerful light penetration, ideal for a flattened and uniform canopy like in SCROG/LST. This kit is therefore a relevant choice to maximize your yields under LED on this area.
Can the HLG 260 Rspec really boost flowering compared to a classic LED with less red in the spectrum?
The HLG 260 Rspec can indeed boost flowering compared to a classic LED that is less rich in red. Its optimized spectrum incorporates a significant amount of deep red and far-red light, essential for stimulating photosynthesis and the hormonal processes associated with flowering. Coupled with a high light efficiency (around 2.6 µmol/joule) and suitable coverage for spaces like a SCROG of 60x120 cm, this kit offers more efficient and homogeneous light, promoting optimal floral development. Many users thus report better quality and uniformity in their crops thanks to this specific spectrum.
In a 60x120 scrog, I plan to use the HLG 260 Rspec, what is the best mounting height to optimize the deep red spectrum without risking burning the buds?
For your 60x120 cm scrog, the HLG 260 Rspec should be installed at a height of 30 to 45 cm above the buds. This distance is ideal to fully exploit the deep red spectrum (660 nm) without risking burning the flowers.
The deep red penetrates well into the dense canopy of your scrog, especially if you stay around 30-35 cm. Consider using the built-in dimming function to adjust intensity based on your plants' reaction. Keep an eye on the buds: if you notice yellowing or rapid drying, raise the light slightly by 5 to 10 cm.
This way, you optimize flowering and trichome production while preserving the health of your plants.
Is passive cooling without fans sufficient to maintain an optimal temperature and avoid noise, especially during prolonged use in an enclosed space?
The HLG 260 Rspec - LED KIT uses passive cooling via aluminum radiators, which are very effective at dissipating heat without generating noise. This system ensures an optimal temperature even during prolonged use in an enclosed space while ensuring the durability and reliability of the lamp due to the absence of moving parts like fans.
You thus enjoy a silent installation, without compromise on performance or longevity.
What is the average yield in g/Watt observed with the HLG 260 Rspec during the flowering phase on 60x120 cm and at a height of 38 cm?
The HLG 260 Rspec consumes around 260 watts with a light efficiency of 2.6 µmol/joule, which is excellent for the flowering phase. Over an area of 60x120 cm and at a height of 38 cm, this LED panel provides uniform and powerful lighting.
Regarding the yield in grams per watt, it varies depending on the variety, growing conditions, and experience, but indoors with such equipment, one can generally expect a yield of around 1 to 1.3 g/W. This figure remains indicative but clearly shows the potential of the HLG 260 Rspec to maximize production on this type of surface.
If you wish to refine your setup to optimize this yield, consider mastering all environmental and nutritional parameters alongside this high-performance lighting.
Is the HLG 260 Rspec easy to install for indoor beginners, and does it plug directly into a 220V wall socket, or does it require a special adapter?
The HLG 260 Rspec kit is very easy to install, even for a beginner in indoor cultivation. It comes pre-assembled and ready to use: you simply have to suspend it using the provided cables above your growing space.
For power supply, it plugs directly into a standard 220V wall socket, with no special adapter needed. The kit includes a switch for easily turning the light on and off.
In summary, this horticultural LED panel is accessible and practical, making it perfect for starting an indoor grow with peace of mind.
What is the actual yield in grams per m2 with the HLG 260 Rspec in a 60x120 cm space during flowering?
The HLG 260 Rspec - LED KIT used in a 60x120 cm area (0.72 m²) during flowering typically offers an actual yield between 430 and 540 grams per square meter. This corresponds to an estimated total production of between 312 and 390 grams, based on a consumed power of about 260 W and high light efficiency.
This kit is perfectly suited for this space, ensuring powerful and even light for excellent plant development.
Can this complete spectrum enriched with red and infrared be integrated into a home automation system to automatically adjust the intensity according to the flowering phases?
The HLG 260 Rspec - LED KIT features a complete spectrum enriched in red (660 nm) and infrared (730 nm), ideal for optimizing growth and flowering phases. It includes an external dimming function, allowing automatic intensity control via a compatible home automation system.
You can thus precisely adjust the brightness according to the plants' needs throughout their cycle. However, for complete home automation management with monitoring and alerts, additional sensors and controllers will need to be added.
What is the actual durability of the LEDs in the HLG 260 Rspec kit and how does this influence the consistency of floral growth over multiple cycles?
The actual durability of the LEDs in the HLG 260 Rspec kit is estimated to be over 50,000 hours, thanks to a design with passive cooling that limits heating and thus reduces the risk of failure. This longevity results in a remarkable stability of the light spectrum, particularly in the crucial wavelengths for flowering (660 nm and 730 nm).
This consistency ensures that your plants always receive optimal lighting, guaranteeing regular and efficient floral growth over multiple cycles without the need for replacement or adjustments. Additionally, the high light efficiency (2.6 µmol/joule) maximizes photosynthesis, contributing to good quality and quantity of flowers throughout the lifespan of the LEDs.
Is the red and infrared spectrum adjustable to optimize flowering for different varieties?
The HLG 260 Rspec - LED KIT features a fixed spectrum combining full-spectrum white LEDs, deep red (660 nm), and far infrared (730 nm), ideal for flowering. This spectrum is not individually adjustable for red and infrared components according to varieties.
However, it incorporates an external dimming function that allows for overall light intensity adjustment via a compatible device, which can help modulate power according to cultivation needs, without altering the spectral distribution.
In summary, no specific adjustment of the red or infrared spectrum, but a practical control of light intensity to optimize flowering according to phase and conditions.
Is the HLG 260 Rspec optimal for a 1x1m SCROG setup in terms of uniformity and power under 260W LEDs?
The HLG 260 Rspec is perfectly suited for a 1x1 m SCROG setup. Its power of 260W and full spectrum ensure optimal growth and flowering, while its coverage of about 1.2 m² guarantees excellent light uniformity across the entire surface. Thanks to its Quantum Board design and the ability to adjust the hanging height as well as the intensity, it provides even and adjustable lighting, ideal for managing a dense and uniform growing screen.
Not seeing your question?
Your browsing
Viewed recently
Go further
More from Horticulture Lighting Group
Horticulture Lighting Group
HLG 100 RSPEC - LED horticultural panel - Samsung LM301H LEDs - Delivered with EU plug
Discover View
Horticulture Lighting Group
HLG 100 4000K - LED horticultural panel - Samsung LM301H LEDs - Delivered with EU plug
Discover View
