Achat vérifié
Cette lampe offre un design épuré et élégant qui valorise l'installation. Le montage est net, sans câbles visibles, ce qui améliore vraiment l'esthétique générale. La qualité de fabrication justifie tout à fait le prix demandé.
Future of Grow - FOG·LED horticultural lamps
FOG UVA/UVB/IR 110 cm 30 W – supplemental bar for Black Serie / Air Grow PRO 600 W
4.7
Réf. FOG-UV-A-B-IR-110CM-30W Future of Grow - FOG
FOG UVA/UVB/IR 110 cm 30 W – supplemental bar for Black Serie / Air Grow PRO 600 W
1.2-1.5 30
- Increases crop yield.
- Promotes resin production.
- Modifies plant morphology.
- Includes UVA-UVB and infrared LEDs.
- Lifespan of 6,000 to 10,000 hours.
- Compatible Air Grow Pro / Black Series 600W
Often bought together
FOG UVA/UVB/IR 110 cm 30 W –… 199,00 € Future of Grow Black Series 600 W –… 1 099,00 €
GrowLED since 2009
French group · indoor growing expertise
Pay in instalments
3 or 4 payments from €50 with Alma, subject to eligibility
24h express available
After dispatch, if offered at checkout
Showroom near Nancy (54)
Au Palétuvier · Champigneulles
FOG UVA/UVB/IR 110 cm 30 W –...
199,00 €
Parraine tes proches
5 % pour toi & 5 % pour ton ami
Description
Product presentation
The BOOST UVA-UVB-IR LED bar is the latest high-tech jewel developed by our research and development center in Switzerland. This 3 in 1 LED bar is made up of three types of LEDs specially designed to improve the growth and flowering of your indoor plants.
Composition of the LED Bar UVA / UVB / Infrared Bar for Black Serie 600W FOG - 110cm 30W
UVA-UVB LED: These LEDs are specially designed to boost your yield, the level of active ingredients and terpenes in your plants. UVA-UVB LEDs directly influence the quality and quantity of resin produced during flowering. We use the latest SEOUL VIOSYS UV LED chip technologies to ensure optimal results.
INFRA-RED LED: Infrared LEDs modify the morphology of your plants, increase internode spacing and promote yield. In addition, they activate the Emerson effect, a key process for photosynthesis. Adding infrared LEDs is essential for abundant flowering and quality resin.
Effects of UVA-UVB LEDs
When the right amount of UV is present, it results in a range of benefits, including increased oil and resin levels. Additionally, UV accelerates the seed germination process, increases root mass, promotes flowering, causes more branching and less stretching, improves taste and odor, creates more robust plants, increases resistance to insects, bacteria and fungi, and strengthen plants for better tolerance to high intensity light. In addition, they reduce shock time and speed up the production and yield process.
However, it is essential to correctly dose UV, as excessive exposure can reduce yield, slow down photosynthesis and cause plant damage.
Natural Plant Defense Mechanism
Plants develop a natural defense mechanism against ultraviolet rays by forming trichomes rich in alkaloids and flavonoids. These molecules act as photoprotectants to protect your plants.
Why Add UV Separately
Despite using the latest SEOUL VIOSYS UV LED chip technologies, the lifespan of a UV LED chip remains lower compared to red and white LED chips. To preserve the lifespan of the entire luminaire, we have chosen to add UV rays separately to our luminaires. This allows you to replace future items at a lower cost and accept future technologies without limits.
Effects of INFRA-RED LEDs
When the right amount of infrared is present, it triggers flowering faster on long-day plants, elongates plants, increases terpenes, provides heat to plants, and activates the Emerson effect. However, an excessive amount of infrared can cause elongation that is detrimental to yield, the risk of plant burns, and excessive heat input to the crop.
Applications
The BOOST UVA-UVB-IR LED bar is ideal for managing plant morphology. It is equipped with infrared LEDs which, when used in growth, allow the space between the internodes to be increased. You can use it 18 hours a day from the growth phase for genetics with tight internodes and little elongation, and 12 hours a day in the last 3 to 4 weeks of flowering. A 30W and 110cm BOOST UVA-UVB-IR bar is suitable for a cultivation surface of 120cm x 120cm to 150cm x150cm.
Compatibility: The BOOST UVA-UVB-IR LED bar is compatible with the BLACK SERIES 600 series using the mounting clip (CLIP BLACK SERIES 400).
Features:
- Power: 30W
- Dimensions: 110cm x 7cm x 7cm
- Weight: 1.5kg
- Transformer integrated into the LED bar and not variable
- Average lifespan: Between 6,000 and 10,000 hours
- Warranty: 1 year
- Plug: EU 230V AC
Caution: Exposure of eyes and skin to UV rays can cause serious injury.
Technical data sheet
Features detailed
| Growing area | 1.2-1.5 |
|---|---|
| Power consumption (W) | 30 |
| Light spectrum | Enhanced UV+IR |
| LED brand | SEOUL VIOSYS |
| Lifespan (h) | 6000-10000 |
Convinced? Shipped from France. Add to cart — 199,00 €
They've adopted it
Reviews customers
Achat vérifié
Excellent produit. Fonctionne
Excellent produit. Fonctionne super bien, consomme pas trop. Livraison rapide. Satisfait de mon achat.
Achat vérifié
Pas mal. Efficace
Pas mal. Efficace, mais un peu plus cher que la concurrence. Qualité correcte.
Achat vérifié
Reçu rapidement, bien
Reçu rapidement, bien emballé. Fonctionne parfaitement. Vraiment satisfait.
Achat vérifié
C'est un bon
C'est un bon produit. Un peu cher, mais la qualité est là. Fonctionne comme prévu.
Achat vérifié
Reçu rapidement, bien
Reçu rapidement, bien emballé. Fonctionne parfaitement. Vraiment satisfait.
Aucun avis ne correspond à ce filtre.
Frequently asked questions
Your questions
Is it possible to synchronize the 30W UVA-UVB-IR bar with a varied light cycle to optimize the growth and flowering of indoor bonsai, or is it better to use it fixed to avoid stress and damage?
It is preferable to synchronize the 30W UVA-UVB-IR bar with an appropriate light cycle that modulates the intensities during the growth and flowering phases of your bonsais. Controlled variations avoid stress and maximize the benefits of the UV and infrared spectrum on the plant. Fixed use without modulation could cause stress and damage to the delicate tissues of the bonsais. The 30W bar is compatible with controllers that allow this type of management for optimized cultivation.
Question : Does the UVA-UVB-IR 30W 110cm bar heat the crop significantly compared to conventional LEDs, and what strategy do you recommend for optimizing UV dosing to maximize yield without causing stress to the plants?
The UVA-UVB-IR 30W 110 cm bar emits slightly more heat than conventional LEDs, primarily due to the infrared, but this thermal contribution remains moderate and does not significantly heat the crop. Its role is mainly morphologic, promoting the spacing of internodes and flowering.
To optimize yield without stress, it is essential to precisely dose the UV: limit their duration to 18 hours a day during growth, especially for tight internode plants, and reduce to 12 hours a day during the last 3-4 weeks of flowering. Use this bar as a complement to the main LEDs to provide its benefits without excess that would hinder photosynthesis or cause thermal stress.
Relevant question for the product pageIs it possible to use the 30W BOOST UVA-UVB-IR LED bar continuously throughout the entire growth and flowering period to optimize both yield and terpene quality, without risking damage to the plants from excessive exposure to UV and infrared?
It is entirely possible to use the BOOST UVA-UVB-IR 30W LED bar during all phases of growth and flowering to stimulate terpene production and improve the overall quality of your plants. UV promotes resin and terpenes while infrared optimizes photosynthesis through the Emerson effect.
However, excessive or prolonged exposure to UV can lead to burning or stress in the plants. Therefore, it is essential to adjust the duration and intensity of lighting based on the specific needs of the crop to avoid any risk of overheating and to promote harmonious development.
Good management of the light spectrum and exposure time ensures an excellent balance between increased yield and plant protection.
With this 30W UVA-UVB-IR LED BOOST Bar on 110cm, and its integration with the 600W Black Series, what are the optimal settings in terms of UV/IR exposure duration to maximize resin production without causing photo-oxidative stress and harmful stretching under LED?
To maximize resin production with the 30W UVA-UVB-IR BOOST Bar integrated into the 600W Black Series, it is advisable to limit UV exposure to 12-18 hours per day, adjusting this range according to your plants' sensitivity to avoid photo-oxidative stress. For infrared (IR), 4 to 6 hours of daily exposure is sufficient to stimulate abundant and well-structured flowering without promoting excessive elongation.
Also, make sure to adjust the UV intensity between 5 and 10% of the total light for a good balance, and ensure regular alternation with visible light for harmonious development. Finally, control the greenhouse temperature by keeping it below 35°C to prevent any thermal stress.
Compatibility across multiple varieties in one piece: Can the LED BOOST UVA-UVB-IR 30W 110cm bar be used simultaneously on different plant varieties with varying UV and infrared needs without risking harm to the growth or yield of each?
The LED BOOST UVA-UVB-IR 30W 110cm bar is designed to enhance growth and flowering by providing a spectrum that includes UVA, UVB, and infrared, useful for several plant varieties. However, each plant has specific needs regarding UV and infrared. Using this bar simultaneously on different varieties is possible, but careful monitoring of the intensity and duration of exposure will be necessary, as an unsuitable spectrum could limit the yield or quality of certain plants.
In summary, it offers good flexibility, but adjustment and regular observation are essential to avoid light stress and maximize benefits for each present variety.
Is the Black Series 600 kit directly compatible with this UVA UVB IR boost bar, or is a special adapter required?
The Black Series 600 W kit is directly compatible with the 110 cm 30 W UVA/UVB/IR boost bar, with no need to use a special adapter. This bar integrates perfectly into the system, allowing for simple installation and effective enhancement of the light spectrum for your cultivation.
Is integration possible with home automation or voice assistant for dynamic management of UV and infrared cycles?
The UVA-/UVB-/Infrared bar for Black Serie/Air Grow PRO 600 W FOG does not have native integration with consumer home automation systems or voice assistants to dynamically control UV and infrared cycles.
However, it can be controlled via specialized horticultural consoles (like Trolmaster) using 0-10V or ESC-5 protocols, allowing fine automation of light intensity and cycles. For classic voice or home automation control, it would need to go through third-party interfaces or modules not included in the product.
This solution provides precise technical management suitable for indoor cultivation, even if it does not integrate directly with home automation.
What is the ideal method to integrate this 30W UVA-UVB-Infrared bar into a growth and flowering cycle to optimize differentiated management and avoid risks of overheating or plant elongation in a 150cm by 150cm growing area?
To effectively integrate the 30W UVA/UVB/Infrared Bar over an area of 150x150 cm, position it 30-40 cm above the plants to limit overheating and prevent etiolation.
During the growth phase, prioritize UVA and infrared spectra to strengthen stems and stimulate healthy root development. Gradually introduce UVB during the transition phase to prepare plants for flowering.
In the flowering phase, combine UVA, UVB, and infrared: UVA and UVB encourage resin production and improve quality, while infrared optimizes photosynthesis and internode spacing.
Ensure to maintain a stable temperature between 20 and 28°C and adequate humidity to limit stress. Regularly monitor the plants to adjust the height or intensity of the bar and ensure an optimal environment.
What is the ideal intensity and optimal duration of daily use of this UVA-UVB-IR LED bar so as not to risk causing light stress or slowing down plant development in a growing space of 150x150cm?
For the 30 W UVA/UVB/Infrared LED bar (110 cm) used in a 150 x 150 cm growing space, the ideal intensity is around the rated power with positioning about 40 cm above the plants to avoid excessive light stress. If your setup allows, it is recommended to adjust the intensity via a dimmer to fine-tune the exposure according to the plants' response.
Regarding the daily duration of use, it is optimal to expose the plants between 12 and 18 hours per day: 18 hours during the growth phase to promote vegetative structure, then 12 hours during flowering to limit stress and optimize the production of secondary compounds. Continuous exposure should be avoided to prevent any slowdown in development or damage due to UV.
In summary, placing the bar at 40 cm, using the intended power while modulating if possible, and limiting daily cycles to 12-18 hours according to the phase, while monitoring the state of the plants, will allow for optimal use of this light supplement without risking stress.
What is the operating temperature of this UVA-UVB-IR 30W lamp at 110cm, and what minimum distance do you recommend to avoid thermal stress on the plants while maximizing the Emerson effect?
The 30W UVA-/UVB-/Infrared LED bar for Black Series/Air Grow PRO 600 W FOG has a moderate operating temperature. Its heat, primarily from infrared, does not generate notable overheating on the crops, ensuring controlled thermal input.
To avoid thermal stress while maximizing the Emerson effect, it is advisable to place the bar at a distance of about 30 to 50 cm from the plants, adjusting according to their reaction. This positioning ensures a good balance between photosynthetic stimulation and thermal comfort.
Furthermore, limit UV exposure to 18 hours a day during the growth phase and 12 hours during the final weeks of flowering to prevent any UV stress and promote quality.
What is the best UVA-UVB-IR dosing strategy in the last 3 to 4 weeks of flowering to optimize terpenes without causing excessive stretch under the Black Series 600W LED?
For the last 3 to 4 weeks of flowering under the Black Series 600W LED, it is recommended to limit UVA-UVB exposure to 12 hours per day, with an intensity not exceeding 5 to 10% of the total lighting. This promotes terpene production while avoiding light stress and excessive stretch.
Regarding infrared, using it for 4 to 6 hours per day stimulates dense and quality flowering without encouraging undesirable elongation. It is important to monitor the temperature, keeping your growing space below 35°C to prevent any thermal stress.
This balanced management of UVA, UVB, and infrared maximizes the aromatic richness and structure of the flowers while respecting the health of your plants.
Regarding infrared, using it for 4 to 6 hours per day stimulates dense and quality flowering without encouraging undesirable elongation. It is important to monitor the temperature, keeping your growing space below 35°C to prevent any thermal stress.
This balanced management of UVA, UVB, and infrared maximizes the aromatic richness and structure of the flowers while respecting the health of your plants.
Does the BOOST UVA UVB IR LED bar for Black Series 600W FOG really deliver on its promises over time with a lifespan announced between 6000 and 10000 hours and only a one-year warranty?
The UVA / UVB / Infrared Bar for Black Series/Air Grow PRO 600W FOG has a lifespan of 6,000 to 10,000 hours, which is quite standard for this type of high-quality horticultural LED. This longevity enables effective use over multiple growing cycles.
Regarding the one-year warranty, it is common in the field of LED equipment, although some products may offer a longer warranty. This duration encourages careful attention to usage conditions, particularly avoiding overheating and maintaining good ventilation to maximize reliability and performance over time.
In summary, the bar lives up to its promises in terms of lifespan, but attentive care contributes to getting the best out of it in the long run.
What is the best strategy to integrate this UVA-UVB-IR 30W bar into a 120x120 cm growing cycle without causing light stress or excessive elongation of the plants?
To integrate the UVA-UVB-IR 30W bar into a 120x120 cm cultivation without light stress or elongation, careful management of exposure is essential. Limit UV exposure to 12-18 hours per day and ensure that UV intensity remains between 5 and 10% of total light. Regarding infrared, 4 to 6 daily hours are sufficient to stimulate dense flowering while avoiding excessive stretching.It is also important to control the temperature by keeping it below 35°C and to regularly alternate UV/IR light with visible light to maintain a growth balance. Finally, always adjust exposure based on the specific needs of the cultivated varieties to prevent any risk of stress.
What is the best strategy to integrate this UVA-UVB-Infrared LED bar into a growth and flowering cycle to optimize yield and quality without risks of tearing or excessive elongation?
To effectively integrate the UVA/UVB/Infrared LED bar into your cycle, it is ideal to use it at the end of the growth phase and during flowering. Expose your plants to UV moderately, 1 to 2 hours a day, to stimulate resin production and enhance the aromatic profile without risking burns or tearing.
Combine this bar with full-spectrum lighting to ensure optimal photosynthesis. Infrared LEDs promote uniform flowering by adjusting the internode spacing through the Emerson effect.
Be sure to maintain a sufficient distance between the bar and the plants to avoid excessive elevation and use pruning or pinching techniques to control the structure.
Carefully monitor your plants' reactions and adjust the duration or intensity of the UV if you notice signs of stress. This approach ensures a perfect balance between yield and quality.
What is the recommended daily usage duration for the UVA-UVB-IR LED bar to optimize growth and flowering without risking burning the plants?
For the UVA-/UVB-/Infrared LED Bar 600 W, it is recommended to use a lighting cycle of 16 to 18 hours per day during the growth phase and 12 hours per day during flowering, in order to optimize photosynthesis while respecting the plants' natural rhythm.
With the built-in dimmer, adjust the light intensity according to the growth phase, and maintain a distance of about 30 cm between the lamp and the foliage to avoid any risk of burning while ensuring good light penetration.
Finally, observe your plants closely: if you notice signs of stress or burning (dry leaves, discoloration), reduce the duration or intensity and gradually increase them. This approach will allow you to fully harness the benefits of the UVA, UVB, and infrared spectra for optimal growth and flowering.
What is the power curve in watts and the exact spectrum in nanometers for each type of UVA, UVB, and infrared LED on this bar to optimize g/watt in cultivation on 120x120 cm?
The UVA / UVB / Infrared Bar for Black/Air Grow PRO 600W FOG Series operates at a total power of 30W. UVA LEDs are typically centered around 380 nm, UVB around 310 nm, and infrared usually around 730 nm or more, although the exact values for this bar are not disclosed.
To optimize the g/W ratio in cultivation over a 120x120 cm space, it is advisable to set the bar approximately 30-40 cm above the plants to maximize efficiency without inducing thermal stress. During the growth phase, prioritize UVA and infrared to strengthen stems and roots, and then gradually introduce UVB during the transition to flowering. During flowering, the mix of the three spectra enhances quality and yield.
Finally, using a controller via 0-10V or ESC-5 allows for precise adjustment of light intensity to make the most of each watt consumed and to tailor the spectrum to your plants' needs.
What is the best way to dose the UVA-UVB-IR LED bar during flowering to maximize terpenes without risking plant stress?
To maximize terpene production with the Black/Air Grow PRO 600W FOG UVA/UVB/Infrared Bar during flowering, it is essential to adopt a gradual and controlled approach. Use the bar for about 12 hours a day, increasing exposure from the pre-flowering phase to acclimate the plants to the UVA/UVB/IR spectrum.
Position the bar at a sufficient distance from the tops of the plants to avoid any stress due to excessive intensity or heat. Good light intensity management allows for stimulating resin and terpene synthesis without causing oxidative stress. Feel free to adjust the distance or duration based on the visible reaction of the plants.
Finally, combine this light stimulation with an appropriate supply of phosphorus and potassium-rich fertilizers to support flowering and optimize results. This method ensures an excellent balance between efficiency and plant health.
What is the best way to manage the power of UVA-UVB-infrared LEDs to limit excessive heat while optimizing the yield on a surface of 150x150cm with this 30w 110cm LED bar?
To effectively manage the power of your 30W 110cm UVA / UVB / Infrared Bar on a surface of 150x150 cm, it is crucial to balance heat dissipation and light intensity. We recommend that you:
- Limit continuous power if you do not have good ventilation, to avoid thermal stress on your plants.
- Install an active cooling system (fan or extraction) to dissipate the generated heat, especially from the UV LEDs that heat more.
- Position the bar 30-50 cm above the canopy for optimal diffusion and to avoid hot spot heat accumulation.
- Supplement this lighting with other LED sources to uniformly cover your growing area and balance wavelengths.
- Gradually increase the duration of UVA, UVB, and IR lighting, starting with moderate cycles during growth and extending them during flowering, to stimulate terpene and resin production without burning the plants.
This approach optimizes yield through UV and IR effects while preserving plant health and the longevity of your LEDs.
What intensity of UVA-UVB-IR do you recommend to avoid elongation while optimizing resin production under LED on a surface of 120x120cm with this 30W bar?
For a surface of 120x120 cm with the Barra UVA / UVB / Infrared 30W, position the bar 30-40 cm above the plants to ensure even coverage without risking excessive elongation.
During the growth phase, favor a medium to high intensity in UVA and infrared to strengthen the stems and promote strong rooting, thus limiting etiolated growth. Gradually introduce UVB in the transition phase towards flowering.
During flowering, combine the three spectrums (UVA, UVB, infrared) by finely adjusting the intensities to maximize resin production while controlling the spacing of the internodes.
To optimize these settings, using a compatible horticultural console (0-10V protocol or ESC-5) is ideal, allowing you to precisely adapt the UVA/UVB/IR levels based on your plants' response.
What dosage regimen do you recommend for the optimal use of this UVA-UVB-IR bar in a 120x120cm cultivation to avoid excessive elongation due to infrared while maximizing resin production?
For a 120x120 cm cultivation, it is advised to place the UVA/UVB/Infrared Black/Air Grow PRO 600W FOG Bar about 40 cm above the plants, using its nominal power of 30 W while adjusting the intensity if possible. During the growth phase, an exposure of about 18 hours per day helps with stress-free development. When flowering, reducing to 12 hours per day promotes resin production while limiting excessive elongation related to infrared. Also, ensure to maintain a stable temperature between 20 and 28°C and good humidity for an optimal environment.
What is the ideal power and optimal daily usage duration of this UVA-UVB-IR 30W bar to avoid excessive stretching while maximizing terpenes during flowering over an area of 1.20m by 1.20m?
The UVA/UVB/Infrared 30W bar for Black Serie/Air Grow PRO 600W is perfectly suited for an area of 1.20 m x 1.20 m. To avoid excessive stretching while maximizing terpene production during flowering, it is recommended to keep this bar at a height of 30-40 cm above the plants.
Regarding the daily usage duration, a range of 4 to 6 hours per day is ideal. During the vegetative stage, prioritize the use of UVA and infrared to strengthen stems and roots. In flowering, gradually incorporate UVB to effectively stimulate terpene synthesis and resin production, while adjusting the duration based on the visible reaction of the plants to avoid any stress or excessive stretching.
This precise management of the spectrum and exposure time combines performance with respect for the natural development of your plants.
What is the ideal hourly dosage range for the use of this UVA UVB infrared bar during the growth phase without risking excessive elongation or light shock for plants under 600W Black Series?
For the UVA / UVB / Infrared Bar for Black/Air Grow PRO 600W FOG - 110cm 30W, the ideal exposure range during the growth phase is 12 to 18 hours per day. A duration close to 18 hours promotes a compact vegetative structure with tight internodes, thus limiting excessive elongation under 600W Black Series.
The bar should be placed about 40 cm above the plants, with moderate intensity adjusted according to plant reactions, ideally via a dimmer, to avoid any light shock or stress from excess UV.
For infrared, moderate exposure of 4 to 6 hours per day is enough to support structured flowering without favoring elongation.
Finally, care must be taken not to expose the plants continuously to UV, by regularly alternating with visible light, to avoid photo-oxidation and stress.
What is the best method to integrate this UV-A UV-B infrared Black Series 600W FOG bar into an existing installation in order to optimize differentiated management between growth and flowering without risking overheating or light stress on the plants?
To integrate your UVA-/UVB-/Infrared Black Series / Air Grow PRO 600 W FOG bar into an existing installation, it is essential to use the built-in dimmer to finely adjust the light intensity according to the growth phase: decrease it during growth (25-50%) to limit stress and increase it during flowering (75-100%) to maximize flowering.
Maintain a distance of approximately 30 cm between the bar and the canopy, adjustable between 20 and 40 cm depending on the size of the plants, to avoid excess light or local overheating.
Although the bar features silent passive thermal management, good active ventilation of your growing space remains essential to prevent any heat buildup and ensure an optimal environment.
The full spectrum including UVA, UVB, and infrared allows for differentiated management of the light spectrum: prioritize blue light for growth and increase the red/infrared component during flowering, thanks to dimmer control.
Finally, the installation is simple and plug & play, with clips and cables provided, facilitating its rapid integration into your current system without complex modifications.
What are the best usage parameters to optimize UVA, UVB, and infrared dosing according to the growth phases under a 30W 110cm LED on 1m²?
To optimize the use of the 30W 110 cm UVA-/UVB-/infrared bar on 1m², it is essential to adjust the doses according to the growth phases:
Vegetative phase: favor a medium to high intensity in UVA (385 nm) and infrared to strengthen stems and roots, while limiting UVB. Keep the bar at 30-40 cm from the foliage with 1 to 2 hours of exposure per day in moderate mode.
Transition phase: gradually increase UVB to prepare for flowering while maintaining UVA and infrared. Use a horticultural controller to precisely adjust the intensity according to the plants' response.
Flowering phase: combine UVA, UVB (~310 nm), and infrared to maximize resin and terpenes, with 1 to 3 hours of daily exposure. Complement with phosphorus and potassium-rich fertilizers for better results.
Important advice: always maintain a sufficient distance and avoid prolonged UV exposure without eye and skin protection.
What is the precise impact of dosage and duration of exposure to UVA-UVB-IR LEDs on flowering and terpene concentration under the BLACK SERIES 600W LED in an area of 1m2 to 1.5m2?
The UVA/UVB/Infrared 30W bar for Black Series 600W FOG, suitable for an area of 1 to 1.5 m², plays a key role during flowering:
- The dosage (30W) is optimized for this area, providing a spectrum that combines UVA, UVB and infrared. UVA stimulates terpene production without excessive stress, while UVB, being more intense, increases resin and active principles at the end of flowering. Infrared enhances plant morphology and activates the Emerson effect, boosting yield.
- The recommended exposure duration is between 1 and 3 hours per day during the flowering phase. This modulation promotes natural terpene and resin production without generating harmful stress.
In summary, a well-controlled dosage and moderate exposure to this UVA/UVB/IR bar maximize floral quality and terpene concentration under your Black Series 600W lighting, while ensuring a balance between stimulation and plant well-being.
UVA-UVB-IR Bar 30W 110cm compatible with Black Series 600: is it possible to use it during the growth phase to avoid excessive stretching and optimize the yield during flowering?
The UVA-/UVB-/Infrared 30W 110 cm bar is indeed compatible with the Black Series 600 W, with no need for an adapter. Its full spectrum is ideal during the growth phase to limit excessive stretching of the plants and promote a more compact structure.
UV-A and UV-B stimulate the production of resin and terpenes, enhancing quality, while infrared optimizes flowering through harmonious development. Its use during growth is recommended, with exposure of about 18 hours per day, and a reduction to 12 hours during the last weeks of flowering to avoid any stress.
It therefore constitutes an excellent complement to boost your crops under the Black Series, provided that the intensity and duration of lighting are well controlled.
Is the durability of the UVA UVB LEDs in this bar really up to your promises and is the replacement simple and affordable in case of failure?
The UVA / UVB / Infrared bar for Black Serie/Air Grow PRO 600W FOG - 110cm 30W has a lifetime of between 6,000 and 10,000 hours, which meets expectations for quality horticultural LEDs. This longevity allows for several growing cycles if the temperature is well managed and ventilation is sufficient to avoid overheating.
In case of failure, the replacement of the LED modules is simple and affordable, thanks to a modular design aimed at facilitating maintenance. The standard one-year warranty is typical, so it is advisable to maintain good usage conditions to prolong lifespan.
In summary, durability is solid and replacement is accessible, making this bar a reliable equipment for your indoor crops.
Does adding this 30W UVA/UVB infrared LED bar to a Black Serie 600W FOG panel significantly increase production without excessive heat buildup in the grow box?
The addition of the 30W UVA/UVB/Infrared LED bar (110 cm) to your Black Serie 600W FOG panel significantly improves production by optimizing flowering, resin, and terpenes, while promoting better plant structure with more efficient node spacing.
Regarding heat, this bar is designed to integrate without generating significant excess thermal output. User feedback confirms controlled thermal management, ensuring the comfort of your plants without the risk of overheating in a growing area of 1 to 1.5 m².
In summary, it is a high-performance light supplement that boosts your results without excessive thermal impact.
What is the exact electrical consumption of this 30W LED bar for a surface of 1.5x1.5m and what additional yield in resin and terpene can be expected compared to an installation without UVA UVB infrared?
The UVA/UVB/Infrared 30W LED bar consumes approximately 30 watts when operating. For a surface of 1.5 x 1.5 m, it is ideally recommended to use two bars to optimize coverage and luminous benefits.
These specific LEDs are designed to stimulate the production of resin and terpenes during flowering. They provide a complementary light spectrum that significantly improves the aromatic quality and the concentration of natural active ingredients in your plants, compared to an installation without UVA/UVB/Infrared. Although the exact figures may vary depending on the cases, this improvement is recognized as significant by indoor cultivation enthusiasts.
Not seeing your question?
Your browsing
Viewed recently
Go further
More from Future of Grow - FOG
Future of Grow - FOG
AIR GROW PRO III 2.95 Hyper Red + Dimmer 600W - FOG - Full Spectrum LED horticultural lamp
Discover View
Related articles
Future of Grow (F.O.G): Swiss LED horticultural lighting arrives on GrowLEDDiscover cutting-edge horticultural LED lighting from Swiss brand Future of Grow (F.O.G), which is redefining indoor...
Read more Choosing a LED horticultural lamp in 2025? Bulbs, bars, power, spectrum...LED horticultural lamps in 2025 are distinguished by several advantages:Energy efficiency and performance :...
Read more FOG Air Grow PRO III 600W 2.95 Hyper Red Grow Light VideoThe AirGrow PRO III HyperRed 600W is a Full Spectrum LED grow light from Future of Grow . It is designed for indoor...
Read more
