Introduction
The Lumatek brand has just reinvented the ATS range and for that they created the ATS 300 Watts PRO and the ATS 200 Watts PRO, these two products have better light intensity, better uniformity and better controlled coverage but that's fine. see it in more detail now!
In the box you will be able to find:
- 1 x ATS Pro LED lighting
- 1 x 230V power cable
- 1 x 0-10V the Dimmer + Velcro
- 2 x Metal suspension cable
- 1 x Manual
Design
First of all in terms of design, you will find a product a little more square compared to the normal version, here we have a color a little more lively too, a little more pronounced, you can find hooks that will make it easier the suspension of the product, then, we have two outputs so SIG IN which will allow you to set up the dimmer or their management console from Lumatek and SIG OUT to put several lighting panels in series from the same brand so Lumatek.
Characteristics
Make room for the characteristics The ATS 300 watts pro measures 55cm x 55cm for a height of approximately 7cm for a weight of 5.2 kg, the ATS 200 watts pro measures 52cm x 52cm for a height of 7cm for a weight of 4 kg.
The ATS pro range is IP65 certified unlike the normal version which is IP20 so you are protected against intrusion, dust and splashing water but since you will never clean your product with a karcher you will not have no worries for you.
This lighting has a lifespan of about 60,000 hours or about 10 years, if you use it correctly, speaking of lifespan, this lighting has no fan so no moving part means no part to change, it is a passive cooling therefore super silent.
Let's move on to led, on this lighting these are TOP BIN LEDs, if you don't know what it is, in simplified terms TOP BIN LEDs are the best LEDs chosen with the fewest possible defects with the best performance during the design lighting.
So you will find red white diodes and deep red, which will allow to have a full spectrum for the growth and flowering of plants for the most connoisseurs of you, you will have a PPF of 816 µmol / s and a efficiency of 2.7µmol / J for the 300W PRO and you will have a PPF of 508 µmol / s and an efficiency of 2.5µmol / J.
You will also have better uniform lighting over 1m by 1m or 80 cm x 80 cm depending on the lighting you choose thanks to a better distribution of the LEDs on the bars and a greater distribution of lighting so we go from 110 ° to 120 ° to really obtain a more homogeneous lighting.
The LED coverage technology has also been improved as you can see here we have Clear Glue technology on the PRO version, compare to the normal version, here we have 99% light transmission without light loss, we also have improved diode life and corrosion resistance. And all this for the same consumption as the normal version.
Accessoires
The ATS pro can be managed with a management console from Lumatek, like the Zeus so you will be able to simultaneously connect several lights and manage them with a single box which will be able to program a sunrise or a sunset, if you do not do not want to invest in a management console, you have the directly integrated dimmer which will allow you to directly manage the intensity of your lighting
Zeus, ATS, VF, controller: find the full range, the recommended model for each grow area and customer reviews on our Lumatek brand page.
