This 1Pot XL extension gives one plant a 25 L pot with its own tray and watering valve. It expands a compatible AutoPot network when you want more growing-medium volume at one position. It is an equipped module, not a bare pot; the reservoir must be provided separately.
One 25 L pot with XL trayOriginal AQUAvalve for 6 mm pipeExtension module without reservoir
How it works
This version uses the original AQUAvalve and 6 mm pipe. Connected to a raised reservoir, the valve fills the tray, then closes the inlet until the water is used. This mechanical principle requires no pump or timer for basic watering. The pot’s round base makes it easier to turn within the tray while keeping the valve position accessible.
Technical overview
One 25 L pot with XL tray
Original AQUAvalve for 6 mm pipe
Extension module without reservoir
Round root-control disc included
Included items
1 × 25 L XL pot
1 XL tray with valve cover
1 AQUAvalve for 6 mm pipework
1 round root-control disc
1 × 6 mm tee connector
1 × 16–6 mm tee connector
1 metre of 6 mm pipe
Compatibility and accessory selection
This module is intended for compatible 6 mm networks. It does not directly connect to the 9 mm Easy2Grow or four-pot kits. Square mats for 8.5/15 L pots do not replace its round protection. Conversion to AQUAvalve5 also requires checking the tray: original grooved trays are not suitable for that valve.
Installation
Place the tray on a level, stable support. Raise the reservoir at least 15 cm above the highest valve. Use a free-draining growing medium and allow plants to establish after their first watering, generally 7–10 days according to the instructions, before opening the supply. Clean the undersides of the pots before placing them in the tray.
Maintenance
Regularly check the reservoir level, filter and pipework. Refill before the reservoir runs empty. Keep trays and valves free of debris, and clean components according to their instructions between crops. Any nutrients used must be compatible with your system generation.
Practical questions
Is this just a 25 L pot?
No. The tray, valve, round root-control disc and fittings listed in the contents are also included.
Can I fit an AQUAvalve5 as a replacement?
Not directly on this 6 mm version. Valve, pipework and tray must be compatible; original grooved XL trays do not accommodate the AQUAvalve5.
AutoPot 1Pot XL extension — 25 L module — 6 mmExpected arrival on 30/10/2026Order→Reservation→DispatchPlace your order and your product will be reserved and dispatched automatically from the incoming shipment.35,90 €Unavailable
