Product successfully added to your shopping cart
Ça pousse dans le bon sens
The new LED range from Lumatek VF is available.
Lumatek presents the innovative range of 120W Vertical Farming LEDs including four 30W LED bars.
These fixtures are ideal for clones and seedlings and for all low PPFD target plants.
Works with “Diver 650W Lumatek for Vertical Farming LED Lighting”
Lumatek VF Vertical Farming 120W – multi-bar LED system for clones and seedlings
Our team will reply within 24 business hours.
Ref:
Quote · Lighting study · Administrative Payment Order
Step 2 · L'éclairage · 10 min, gratuit
Discover the powerful Vertical Farming 120W LED horticultural panel, from Lumatek .
This 120W Vertical Farming LED lighting has a spectrum suitable for clones and seedlings .
This product has a PPF of 308 µmol/s and an efficiency of 2.4 µmol/s/J .
Spectrum of the VF120W:
| Functions | Dimmer and Console Compatibility |
|---|---|
| Waterproof | Yes |
| LEDs | High Spec Red & White Diodes |
| Plug & Play | Yes |
| Daisy chain | Yes |
| Temp. working environment | -20°C ~+40°C |
| Dimensions | 120,7 x 52,1 x 2,05 cm |
| Format | Multi-bar system |
| Power consumption (W) | 130W |
| Light spectrum | Growth |
| HPS/MH equivalent (W) | 182W |
| Weight (kg) | 2.1Kg |
| PPF | 308 µmol/s |
| Connected control | Non |
| Compatibility | Driver Lumatek 650W, dimmer 0-10V, Digital PanelPlus 2.0 |
| Estimated duration of action | 60 000 hrs |
| Dimming mode | 0-10V |
| Color temperature (K) | 4000 et 3000 |
Reçu dans un emballage simple mais efficace, montage hyper rapide. Les barres s'ajustent bien, la lumière est agréable sans être trop forte, parfait pour mes coin déjà bien encombrés. Je note une nette différence niveau consommation électrique, c'est cool. RAS pour le moment.
Très cool ce système pour gagner de la place verticalement. Le montage est simple, vraiment pratique quand on a peu de place. La lumière est douce, pas agressive, les petites barres sont idéales pour répartir la lumière. Je vais certainement en recommander à mes potes.
Pas mal. Efficace, mais un peu plus cher que la concurrence. Qualité correcte.
Plutôt satisfait. Ça marche bien et fait son job correctement. Le carton était un peu abîmé à la réception, mais le produit lui-même n'a rien. Livraison acceptable. Bon service client. Fonctionne comme prévu, même si j'aurais aimé plus de détails dans la notice d'utilisation.
Correct, fonctionne bien. Juste un peu déçu par l'emballage. Sinon c'est bon.
Aucun avis ne correspond à ce filtre.
The light spectrum of the VF Vertical Farming 120W by Lumatek is fixed, made up of a balanced mix of 4000K and 3000K white diodes, perfectly suited for cloning, seedling, and young plant phases.
However, this model offers a dimming function via a separately sold compatible driver, allowing you to adjust the light intensity between 25% and 100%. This provides some margin to optimize the power according to needs, but the spectrum itself cannot be modified.
In summary, the spectrum cannot be adjusted for different growth phases, but the intensity is adjustable to suit the plant's stage of development.
The VF Vertical Farming 120W from Lumatek stands out clearly from a traditional full-spectrum LED panel thanks to its optimized warm and cold white spectrum for clones and seedlings. This targeted light promotes more uniform rooting and rapid initial growth without the photosynthetic stress sometimes induced by wide spectra that are too rich in red or blue.
With a light efficiency of 2.4 μmol/J and good distribution thanks to its multi-bar design, it enhances root density and quality as well as the uniformity of young plants, which traditional full-spectrum panels, often designed for vegetative growth or flowering, cannot guarantee as well.
In summary, the real gain lies in the precision of the spectrum and the quality of light delivered, providing superior results for the growth of clones and seedlings, particularly in vertical or confined environments.
The LED panel VF Vertical Farming 120W from Lumatek operates perfectly within a temperature range of -20°C to +40°C, showcasing its robustness indoors.
It is not mandatory to install a specific external cooling system, even in confined spaces, thanks to its design with a clear glue cover that enhances its durability. However, good ventilation is strongly recommended to avoid heat buildup and preserve the lifespan of your equipment.
The VF Vertical Farming 120W system from Lumatek is perfectly suited for a growing space smaller than 0.5 m² due to its compact design and its ability to effectively illuminate clones and seedlings. However, this system does not allow for physical modification of the configuration of the LED bars, which remain fixed. The modularity only concerns the dimming of light intensity via a compatible driver, which allows adjusting the power according to needs without changing the actual area covered by the bars.
In summary, this product offers excellent uniform light coverage for restricted spaces, but it cannot be dismantled or reorganized to reduce its footprint. If you are looking for flexible lighting in size, it is better to prioritize power adjustment rather than physical modification of the system.
Their modularity allows for flexible configuration, while the optimized light spectrum and 120° light angle ensure even distribution, avoiding shadow areas and over-exposure. The absence of WiFi or an app also reduces any risk of electronic interference.
In summary, by properly spacing the panels, ensuring good ventilation, and following the installation instructions, you will effectively optimize growth without technical concern in your growing space.
The VF Vertical Farming 120W offers a fixed light spectrum combining 4000K and 3000K white diodes, ensuring an ideal balance between cool and warm light. This distribution promotes uniform rooting and rapid initial growth of clones and seedlings without photosynthetic stress.
In terms of efficiency, this system delivers 2.4 μmol/J with a total PPF of 308 μmol/s, meaning that each watt consumed generates a high amount of useful photons for photosynthesis. This performance guarantees excellent energy conversion into active light, ideal for stimulating germination and strong root densification, particularly in vertical cultivation.
Additionally, although the spectrum is not adjustable, it is possible to adjust the light intensity between 25% and 100% via a compatible driver, to precisely meet the plants' needs based on their development stage.
In summary, this system is designed to provide uniform and energy-efficient lighting, optimizing the growth of young plants from the earliest phases.
The VF Vertical Farming 120W panel uses LEDs with an average lifespan of approximately 60,000 hours. This exceptional longevity is made possible by a transparent protective layer that offers a light transmittance of 99%, while ensuring excellent corrosion resistance and an IP65 rating.
This robustness guarantees a remarkable consistency of lighting for your seedlings and clones, with a stable and powerful light flux (308 µmol/s) over the long term. This stability is crucial for uniform and rapid growth, especially in vertical farming systems where homogeneity is essential.
In summary, the Lumatek VF 120W ensures reliable and efficient lighting, perfectly suited to the demanding needs of young plants and clones.
The VF Vertical Farming 120W from Lumatek is specifically designed for optimal clone and seedling growth thanks to its balanced light spectrum and a power of 120W distributed over four LED bars. In a space of approximately 1m², a unit covers nearly 0.6m², which often invites the positioning of multiple systems to ensure complete and uniform coverage.
Although there is no exact figure on the exact yield in terms of clone growth, this system promotes rapid and uniform growth thanks to a stable light flux (308 μmol/s) and excellent energy efficiency (2.4 μmol/J). The quality of warm and cool white light optimizes root development and the vigor of young plants, especially in vertical or confined configurations.
To maximize your results, it is recommended to adapt the number of units according to seedling density and adjust the light intensity based on the needs of the clones. This device is a high-performance choice for a precise and professional indoor growing environment.
The VF Vertical Farming 120W uses a balanced light spectrum composed of white diodes at 4000K and 3000K, specially optimized for rapid root development during the cloning and seeding phases. This spectrum promotes dense and uniform root growth, ideal for supporting the youth of the plants.
However, although this spectrum is excellent for the initial phase, it is not explicitly designed or validated for the specific growing conditions of SCROG with LED. Nevertheless, its beneficial action on the roots can positively contribute to preparing your plants for a harmonious SCROG setup.
The horticultural panel VF Vertical Farming 120W has an average lifespan of the LEDs of approximately 60,000 hours, which is excellent for intensive use in cloning and seedling cultivation. This exceptional longevity significantly reduces the overall cost of use, as the LEDs require very few replacements over several years.
Moreover, its moderate consumption of 130W combined with an energy efficiency of 2.4 μmol/J ensures notable energy savings. The Clear Glue technology enhances the durability of the diodes by limiting light losses and extending their performance, thereby reducing the need for frequent maintenance or repairs.
In summary, this system offers an excellent price-to-quality ratio in the long term thanks to its durability and energy efficiency, making it ideal for a reliable investment in indoor cultivation.
The VF Vertical Farming 120W LED panel from Lumatek has fixed bars, so it is not possible to adjust their height to follow the growth of your plants.
However, you can adjust the light intensity with a separately sold compatible dimmer, allowing you to modulate the power between 25% and 100% according to your needs.
To adjust the height of the panel itself, you will need to provide an external mechanical system (cables, chains, articulated arms) as this function is not integrated into the system.
In summary: variable intensity, fixed height of the bars, height of the panel adjustable via an independent support.
The VF Vertical Farming 120W - Multi-Bar System from Lumatek is ideal for managing seedlings and clones together thanks to its vertical multi-bar design. This configuration allows for a uniform distribution of light over multiple levels, thus optimizing space and allowing for the cultivation of different growth stages simultaneously.
The light spectrum, combining 4000K and 3000K white diodes, is perfectly suited for young plants, promoting healthy development without excessive light. With high energy efficiency (2.4 μmol/J) and a PPF of 308 μmol/s for only 120W consumed, it ensures good light intensity while controlling electrical consumption.
Finally, the versatility of installation (bars that can be suspended or placed horizontally) and an IP65 protection rating ensure durability and moisture resistance, making it perfect for an indoor growing environment with variable needs.
The VF Vertical Farming 120W from Lumatek is ideal for clones and seedlings due to its optimized fixed spectrum combining 4000K and 3000K white diodes, promoting rapid and uniform growth without stress.
For integration into an automated lighting system, it requires a dimming-compatible driver (sold separately). This driver allows modulation of light intensity between 25% and 100%, providing precise control of the lighting power according to the needs of young plants.
The spectrum is not adjustable, but this fine adjustment of intensity via an automated system or growing controller ensures optimized lighting for your clones and seedlings, especially in vertical crops or confined spaces thanks to its multiple bars promoting uniform light.
The VF Vertical Farming 120W stands out with a light spectrum specifically designed to synchronize the growth of clones and seedlings in the same space. Its balanced mix of warm white light (3000K) and cool light (4000K) minimizes photosynthetic stress and promotes quick rooting as well as uniform growth.
With a high light efficiency (2.4 μmol/J) and a suitable photonic power (308 μmol/s), it delivers just the right amount of light to stimulate photosynthesis without excess. The multi-bar design ensures uniform distribution over all plants, avoiding shadow areas and desynchronized growth.
Finally, the dimmable function allows for precise adjustment of intensity according to the stage of your plants, ideal for confined spaces or vertical farming installations. This system effectively optimizes the quality and uniformity of your young plants and clones.
The VF Vertical Farming 120W delivers a real light output (PPF) of 308 µmol/s for its optimal coverage area of about 1.2 m x 0.5 m (0.6 m²). Its electrical consumption is 120 W, which is precisely 120 Wh per hour in continuous operation at full power.
For a surface of 1.5 m x 1.5 m (2.25 m²), a single unit will not cover the entire area uniformly, which will reduce the light flux per square meter. Several lamps arranged appropriately would be needed to maintain a homogeneous and effective PPFD over this surface.
The power can also be adjusted using the dimming function, which allows you to modulate the light intensity between 25% and 100% depending on the growth stage, while maintaining the same recommended height.
The VF Vertical Farming 120W from Lumatek delivers a balanced spectrum of 4000K and 3000K white diodes, perfectly suited for clones and seedlings, promoting healthy rooting and rapid growth without stress.
With its 120W spread over four LED bars and a dimming function allowing adjustment of light intensity from 25% to 100%, this system is ideal for use in ultra-restricted spaces. This modularity helps limit the heat output, thereby reducing the risk of overheating.
The multi-bar design optimizes light distribution and facilitates ventilation, which remains essential to ensure a cool and healthy environment.
The multi-bar system of the VF Vertical Farming 120W provides a more uniform light distribution across multiple levels, ideal for the simultaneous growth of clones and seedlings in vertical cultivation. Unlike a traditional single-spectrum LED panel, it offers a balanced light spectrum (4000K and 3000K white diodes) perfectly suited to the specific needs of young plants, promoting harmonious development without excessive light.
Additionally, its excellent energy efficiency (2.4 μmol/J) combined with a stable luminous flux ensures rapid and homogeneous growth. The intensity is also adjustable via a dimmer, allowing for precise power adjustment according to growth stages, a benefit often absent from traditional fixed-intensity panels.
Finally, this design optimizes space by allowing multiple levels of plants to be cultivated in the same volume, thereby maximizing yield per surface area.
In summary, the VF Vertical Farming 120W greatly surpasses a traditional LED panel in terms of flexibility, efficiency, and adaptation to the specific needs of clones and seedlings.
The ideal distance between the VF Vertical Farming 120W panel from Lumatek and your seedlings is between 30 and 60 cm. This range ensures sufficient lighting for fast and healthy growth while avoiding any risk of burning. With its dimmable feature, you can precisely adjust the light intensity according to the stage of your plants and fine-tune this height for optimal results.
Also, make sure to ensure good ventilation around the seedlings to avoid heat buildup, although this system does not require any special external cooling.
Lumatek VF Vertical Farming 120W – multi-bar LED system for clones and seedlings 299,00 € 4.2/5 Restock in progress 
Lumatek VF Vertical Farming 120W – multi-bar LED system for clones and seedlings
* Required fields
Write your review and get a voucher for discount 5%
*valid for 150 daysor Cancel
