Question 1

The Dark Propagator DP120 tent seems ideal for LED cultivation of young plants and mother plants. However, I wonder if the interior dimensions allow for comfortably installing several Phalaenopsis pots in bloom. Could you specify the exact capacity in terms of the number of medium-sized pots, as I have about twenty of these delicate orchids to make bloom again in an appropriate space?

Accepted Answer

The Dark Propagator DP120 box offers a space of 120x60 cm, which is 0.72 m² on the floor. For medium-sized Phalaenopsis pots (about 15-20 cm in diameter), you can place about 12 to 15 plants, depending on their arrangement and the care given to each orchid. If you have about twenty orchids to make bloom again, it will be a bit tight in a single tent. For more comfort and better ventilation, it would be preferable to consider a second space or the use of shelves to optimize vertical surface area.

Question 2

For a 120x60 surface with a height of 190cm, what LED power do you recommend to optimize growth and flowering without overheating?

Accepted Answer

For the Box Dark Propagator 120 DP120 (120x60x190 cm), an LED power of 200 to 300 watts with a full spectrum will be ideal for optimal growth and flowering while limiting the risk of overheating. This choice allows good light penetration in this volume, especially if the ventilation is well managed. A lamp like the Quantum Board 100W or a Spectrapanel X160 160W panel can offer a good compromise and allow you to adjust the power with timers or dimmers if needed. Finally, do not forget good ventilation, which is essential to evacuate heat and maintain a stable climate.

Question 3

What is the maximum weight supported for hanging a pro LED panel without deforming the Ø16mm tubes of the DP120?

Accepted Answer

The Dark Propagator DP120 is designed with robust Ø16 mm chrome tubes, suitable for suspending horticultural LED panels. However, the manufacturer does not provide a specific limit regarding the maximum weight supported by these tubes without the risk of deformation.In practice, it is recommended to choose LED panels with a moderate weight that complies with the usual standards for this type of structure, in order to preserve the strength of the assembly and the durability of the tent. If you are looking for a pro LED panel, you can check our selection of LED panels suitable for growing frames like the DP120.

Question 4

Is it possible to connect two Dark Propagator DP120 tents to run two crops in parallel with an independent ventilation system for each tent?

Accepted Answer

Yes, it is entirely possible to use two Dark Propagator 120 DP120 tents in parallel to grow two distinct crops, each with its own ventilation system. Each tent has several openings (ventilation windows with mesh screens, extraction, cable pass-through) that facilitate the installation of an independent ventilation system.

Question 5

Beginner expandable kit compatible with the DP120 tent and includes LED lighting?

Accepted Answer

The Dark Propagator 120 DP120 tent (120x60x190 cm) is designed for growing and flowering with great versatility, including metal shelves and pass-throughs to facilitate the installation of lights, including LED. However, it does not come with LED lighting in its basic kit. There is no specific beginner expandable kit directly including a DP120 tent with integrated LED lighting. However, this tent is perfectly compatible with many LED panels or bars that you can choose according to your budget and needs to create a customized expandable kit.

Question 6

Is integration possible for temperature and humidity sensors compatible with home automation?

Accepted Answer

The Dark Propagator 120 DP120 Box is not specifically designed for native integration of compatible temperature and humidity sensors for home automation. However, its robust design with a Mylar fabric and galvanized steel structure allows for cable passages, providing some flexibility to manually add these sensors. You can indeed install your sensors inside the tent by passing the cables through the designated openings, which will facilitate the precise control of the growing environment through your home automation system.

Question 7

What is the maximum load the structure can support to suspend lighting and extractor without the risk of deformation?

Accepted Answer

The structure of the Box Dark Propagator 120 DP120 can support a maximum load of 10 kg for all suspended items, namely lighting and extractor or filter. This limit ensures that the tent does not undergo any deformation.The total weight of the tent itself is 19.8 kg, so it is important to adhere to this suspension capacity to ensure the stability and longevity of your setup.

Question 8

What is the optimal capacity to manage multiple varieties of plants in the same DP120 tent without compromising the growth and flowering of each with a single LED lighting?

Accepted Answer

The Box Dark Propagator 120 DP120 tent offers a ground area of 0.72 m² with an interior height of 1.90 m, ideal for growing multiple varieties in parallel under a single LED lighting. To preserve the growth and flowering of each, it is advised to: Avoid saturating the ground area by leaving 20 to 30% of free space to ensure good air circulation and optimal light distribution. Use the 2 to 3 levels of removable shelves to organize plants based on their size and light needs, thus maximizing vertical space. Choose a high-performance LED lighting that is well positioned to ensure uniform coverage for all plants. Avoid growing together varieties with very different requirements for light and humidity to not compromise their development. By following these recommendations, the DP120 allows you to effectively manage multiple varieties without compromising either growth or flowering, while optimizing indoor space and light.

Question 9

What is the best method to limit noise and odors while maintaining optimal ventilation in the Dark Propagator DP120 tent?

Accepted Answer

To limit noise and odors while ensuring optimal ventilation in the Dark Propagator 120 DP120 Box, several solutions prove effective: 1. Activated carbon filter: It easily installs on the extraction system to effectively neutralize odors. 2. Silent fans: Choosing models specifically designed to reduce noise helps maintain a quieter environment. 3. Acoustic insulation: Adding insulating materials around the tent can mitigate noises from fans. 4. Airflow optimization: Use the DUCTING FLANGE (DF16) integrated to regulate air flow, ensuring effective ventilation without excessive noise nuisance. 5. Regular maintenance: Cleaning the tent and air ducts prevents the appearance of unpleasant odors related to bacteria or mold. These methods, when combined, allow you to make the most of your Dark Propagator setup by providing a healthy, discreet, and efficient environment.

Question 10

What is the maximum recommended load for suspending powerful LED lighting without compromising the stability of the DP120 tent?

Accepted Answer

The maximum recommended load for suspending powerful LED lighting in the Box Dark Propagator 120 DP120 is 10 kg in total, including the lighting and any other suspended accessories such as an extractor. Adhering to this weight ensures the stability of the tent and an optimal growing environment.

Question 11

Is it possible to manage the temperature and humidity independently between the propagation area and the flowering area in this DP120 tent, given its single compartment?

Accepted Answer

The Dark Propagator 120 DP120 Box is designed with a single compartment. It does not have an internal divider, which means that the temperature and humidity are shared throughout the space. Therefore, it is not possible to manage these parameters independently between the propagation area and the flowering area. You can organize your cultivation vertically on multiple levels, but the climatic conditions remain uniform throughout the tent.

Question 12

Does the M210D fabric and the Ø16mm chromed tubes guarantee sufficient durability and weight support for intensive use over more than 2 years without deformation or tear?

Accepted Answer

The M210D fabric of the Dark Propagator 120 is designed to be very durable, with good wear resistance, suitable for intensive use. The Q195 steel tubes of Ø16mm ensure a solid structure, capable of supporting a significant weight over several years without deformation. However, optimal durability will always depend on the care taken during assembly, use, and maintenance (avoid excessive humidity, rough handling). If well maintained, this box can easily last over 2 years without tearing or deformation.

Question 13

Is integration possible with remote temperature and humidity monitoring systems via a smart plug or a compatible home automation sensor in the Dark Propagator DP120?

Accepted Answer

The Dark Propagator Box 120 DP120 is designed with specific openings for cable passage, making it easy to install temperature and humidity sensors inside. You can therefore easily integrate home automation compatible probes connected to a remote monitoring system via a smart plug or a similar device. Its robust structure supports up to 10 kg suspended, leaving room to add this type of equipment without risking deformation. In summary, even though the tent does not have a native home automation system, it clearly facilitates the integration of sensors and the automated management of the growing environment.

Question 14

Can the interior layout of the DP120 be optimized to maximize the yield in g/W while maintaining an ideal distribution of LED light in the space of 1.4m³?

Accepted Answer

The Box Dark Propagator 120 DP120 is perfectly suited to optimize yield in g/W thanks to its volume of 1.4 m³ and its vertical configuration on 5 levels. By multiplying shelves with propagation trays, you maximize the number of plants without encroaching on the ground surface, which increases the energy efficiency of LED lighting. To ensure ideal light distribution, it is essential to install the LED lamps at the center of the ceiling, choosing lightweight models that respect the 10 kg hanging weight limit. Using support grids and reflectors allows for uniform positioning of plants, thereby avoiding shadow areas and ensuring homogeneous coverage. Finally, well-thought-out ventilation and precise control of climatic conditions promote plant health and maximize their light absorption, enhancing overall yield. This integrated approach makes the DP120 a very efficient system for effective indoor cultivation under LED.

Question 15

What is the best way to organize several varieties with different needs in the Dark Propagator DP120 tent to optimize growth and flowering under LED?

Accepted Answer

To optimize the cultivation of several varieties with different needs in the Dark Propagator 120 DP120 Box (120x60x190 cm), it is essential to fully utilize its 12 removable grids that allow organizing plants on multiple levels. Place the tallest plants at the top, and the shorter or younger varieties on the lower levels, in order to adapt exposure to their light requirements. Position your varieties according to their light requirements, bringing closer those that require more LED intensity. Thanks to the numerous openings, you can install humidity, temperature, and CO₂ sensors to precisely control the environment, adjust ventilation and watering, and thus create microclimates suitable for each group. Do not forget to ensure effective and filtered ventilation, with an activated charcoal filter, to guarantee good air quality and avoid condensation. Finally, be careful not to exceed the maximum suspended load of 10 kg and to choose plants that do not exceed 80 cm for optimal space management.

Question 16

How many kilograms can the DP120 support in suspended load without compromising the stability of the tent?

Accepted Answer

The Box Dark Propagator 120 DP120 can support a maximum suspended load of 10 kg. This includes all suspended equipment such as lighting, extractor, or filter. Adhering to this limit is essential to prevent any deformation and ensure the stability and longevity of the tent.

Question 17

What is the maximum load for lighting, extractor, and filter suspension in the DP120 tent?

Accepted Answer

For the Box Dark Propagator 120 DP120 tent, the recommended maximum load for the suspension of lighting, extractor or filter is 10 kg in total. This limit includes all equipment suspended inside in order to maintain the integrity and stability of the structure. The weight of the tent itself, which is 19.8 kg, does not count towards this maximum load. Respecting this limit is essential to ensure the durability and safety of your setup.

Question 18

In a space of 120x60x190 cm, what power and type of LED lighting do you recommend to optimize growth and flowering without overheating the box?

Accepted Answer

For your Box Dark Propagator 120 DP120 (120x60x190 cm), we recommend an LED power between 100 and 150 W, well distributed over the entire surface to ensure even lighting without hot spots. Opt for full spectrum horticultural LED panels, designed for growth and flowering, lightweight and featuring strong heat dissipation. Their hanging installation on the robust structure of the box allows for secure setup. Finally, efficient ventilation with regular air renewal is essential to avoid overheating and maintain an optimal temperature, thus maximizing the development of your plants.

Question 19

Can additional shelves or suspension systems be easily added to the DP120 box to optimize the use of interior space with LEDs and mother plants?

Accepted Answer

The Dark Propagator 120 DP120 Box features a robust chrome-plated steel structure that allows for the addition of a suspension system or extra shelves to optimize interior space. However, the recommended maximum suspended load is approximately 10 kg in total, including lighting and accessories, to preserve the stability and durability of the tent. The configuration provides multiple openings for cables and sensors, facilitating the installation of LED fixtures and other suspended equipment. To optimize use with mother plants, it is therefore possible to attach compatible and lightweight accessories, ensuring that this weight limit is not exceeded. This controlled modularity will allow you to make the most of your LED growing space while ensuring the safety and sturdiness of your setup.

Weight	19.8kg
Dimensions	120cm x 60cm x 190cm
Materials	M210D canvas Ø16mm tubes (Q195 Chrome Plated) Corners 2.0mm/4.0mm (PolyPropylene) Font PE600D & Bag PE210D
Tent volume	1.4m

Waterproof	No
Marque	Secret Jardin
Dimensions (cm)	120x60x190cm
Surface de culture (m²)	0.72
Poids (kg)	19.8
Densité du mylar	M210D
Étanche à la lumière	Non
Charge max (kg)	10
Diamètre des tubes (mm)	16 mm
Nombre de boutures	1650
Nombre de niveaux	5
Hauteur intérieure (cm)	190
Ventilation recommandée (m3/h)	100

Product successfully added to your shopping cart

There are 0 items in your cart. There is 1 item in your cart.

Box Dark Propagator 120 DP120 - 120x60x190cm - Growth and flowering area

Points forts

Étanche

Présentation du produit

Expert grower opinion:

Product specifications:

Questions/Answers area:

Features

Caractéristiques détaillées

Comments All reviews

Summary

Your questions about this product

Exchange under 14 days

Free delivery from 100€*

Delivery in Europe

Payment secured

Facilities of payment

Best prices guaranteed

Guarantee GrowLED

GrowLED Sponsorship