Question 1

Is it possible to enhance odor reduction in the Hydro Shoot 120x120x200 without compromising the airflow essential for healthy cultivation?

Accepted Answer

The Hydro Shoot HS120 V2 tent has no documented acoustic rating. Noise depends on the extractor, its speed, ducts and transmitted vibration. Use compatible connections (2 sleeves Ø 230 mm), avoid unnecessary bends and use intended fixings. For odours, match a carbon filter to actual airflow and avoid leaking connections; reducing airflow too far can allow heat and humidity to build up.

Question 2

What is the main difference between version 1 and version 2 of the Hydro Shoot 120x120x200 cm in terms of light reflection optimization and frame durability?

Accepted Answer

M210D is not a measured reflectance percentage or a thermal/acoustic insulation rating. There is no PPFD, light-loss or comparative-yield test for your setup in the Hydro Shoot HS120 V2. Compare light PPFD maps at the intended distance and keep the walls clean. The lining neither heats the space nor removes lighting heat, and it does not guarantee yield.No service life in years or indestructibility claim is established for Hydro Shoot HS120 V2. Follow load limits, lamp clearances and cleaning instructions. Avoid standing water, corrosive deposits and pulling on zips; dry before storage. Regularly check seams, lining, joints and bars. Have damage or wear assessed before continued use.

Question 3

Possible integration with voice assistant to control ventilation and lighting in the Hydro Shoot 120x120x200 V2 tent by Secret Jardin?

Accepted Answer

Hydro Shoot HS120 V2 is a passive enclosure: it has no built-in connected sensor, app or voice control. You can add mutually compatible sensors and controllers, use the intended cable openings and check wireless coverage. Control of lighting, extraction and irrigation depends on equipment interfaces, not the tent. WebIT is a plant support net, not a home-automation system.

Question 4

How can I optimize ventilation to reduce noise and odors without compromising air circulation in the Hydro Shoot 120x120x200cm V2?

Accepted Answer

The Hydro Shoot HS120 V2 tent has no documented acoustic rating. Noise depends on the extractor, its speed, ducts and transmitted vibration. Use compatible connections (2 sleeves Ø 230 mm), avoid unnecessary bends and use intended fixings. For odours, match a carbon filter to actual airflow and avoid leaking connections; reducing airflow too far can allow heat and humidity to build up.

Question 5

Does the aluminum frame support a constant weight of 10kg without deforming over time? Do the seams and zipper hold up over time without leaks or wear?

Accepted Answer

The documented version has painted steel poles, not an aluminium frame.The documented limit for Hydro Shoot HS120 V2 is 15 kg per bar · 30 kg total, distributed. Lamp watts and extractor m³/h do not indicate weight: add the masses of equipment, cables, hangers and accessories. Spread them across the intended bars without exceeding any limit. Do not hang a filled reservoir or use improvised reinforcement to increase capacity.No service life in years or indestructibility claim is established for Hydro Shoot HS120 V2. Follow load limits, lamp clearances and cleaning instructions. Avoid standing water, corrosive deposits and pulling on zips; dry before storage. Regularly check seams, lining, joints and bars. Have damage or wear assessed before continued use.

Question 6

What is the actual usable height under the crossbar to optimize a SCROG or LST light in this 120x120x200 Secret Jardin version 2 tent?

Accepted Answer

Hydro Shoot HS120 V2 has a nominal 120 × 120 cm footprint, or 1.44 m². Equipment, ducts and access reduce the space available for pots. Total height is 200 cm; subtract pots, the light, hangers and lighting clearance to calculate plant space. Clear door opening dimensions cannot be inferred from exterior dimensions.Hydro Shoot HS120 V2 has a nominal footprint of 1.44 m². A plant support net or training setup must leave access for watering, openings and air above and below the foliage. A bar’s vertical load rating does not certify lateral net tension. For dense planting, choose lighting by its actual coverage and check climate at several points; the tent alone does not guarantee yield.

Question 7

What accessories do you recommend to optimize ventilation in the Hydro Shoot 120x120x200 V2 tent to maintain an ideal VPD under powerful LEDs?

Accepted Answer

Hydro Shoot HS120 V2 has 2 sleeves Ø 230 mm. These are openings, not built-in fans. Arrange the inlet and exhaust so fresh air does not immediately leave again, and provide suitable circulation around the foliage. Size actual airflow with the filter, bends and duct length in mind; check temperature and humidity, including after lights switch off. Air renewal cannot cool the enclosure below incoming-air temperature. Manufacturer configuration reference: 350 m³/h extraction with a filter. This is a sizing example, not measured installed flow or a VPD guarantee; adapt it to actual equipment and climate.

Question 8

Really evolutionary starter kit to begin and move to a more professional system? Easy installation of filters with extraction socks? Does Mylar 70D really guarantee better growth in practice?

Accepted Answer

The documented version uses M210D Mylar; the question’s 70D premise is not retained.Cover and frame, 2 hanging bars, 1 removable tray(s). Add lighting, extraction, air circulation, a filter if needed, pots and growing medium separately. An equipped illustration does not mean the devices are included. Check the offer contents before selecting a kit.M210D is not a measured reflectance percentage or a thermal/acoustic insulation rating. There is no PPFD, light-loss or comparative-yield test for your setup in the Hydro Shoot HS120 V2. Compare light PPFD maps at the intended distance and keep the walls clean. The lining neither heats the space nor removes lighting heat, and it does not guarantee yield.

Question 9

What real influence does the 95 percent reflection of Mylar 70D have on the yield under intensive LED lighting in a Hydro Shoot 120x120x200 tent?

Accepted Answer

The documented version uses M210D Mylar; the question’s 70D premise is not retained.M210D is not a measured reflectance percentage or a thermal/acoustic insulation rating. There is no PPFD, light-loss or comparative-yield test for your setup in the Hydro Shoot HS120 V2. Compare light PPFD maps at the intended distance and keep the walls clean. The lining neither heats the space nor removes lighting heat, and it does not guarantee yield.For 120 × 120 cm, choose lighting by plant needs, its PPFD map at the intended height, dimensions and required clearances. Tent size alone does not establish a maximum wattage. Watts certify neither hanging capacity nor a stable temperature; add suspended masses and test heat with equipment running. Without a specific light and measurement protocol, no PPFD or g/W increase can be given.

Question 10

How to optimize ventilation in the Hydro Shoot 120x120x200cm V2 for differentiated management of growth and flowering?

Accepted Answer

Plants with compatible needs can share Hydro Shoot HS120 V2, but separate lights or timers do not create light- and air-isolated zones. Group plants by height, photoperiod and climate needs, leaving room for airflow. For truly different dark periods or climates, use purpose-designed separate enclosures or partitions with suitable ventilation; do not cut the cover to improvise two tents.Hydro Shoot HS120 V2 has 2 sleeves Ø 230 mm. These are openings, not built-in fans. Arrange the inlet and exhaust so fresh air does not immediately leave again, and provide suitable circulation around the foliage. Size actual airflow with the filter, bends and duct length in mind; check temperature and humidity, including after lights switch off. Air renewal cannot cool the enclosure below incoming-air temperature. Manufacturer configuration reference: 350 m³/h extraction with a filter. This is a sizing example, not measured installed flow or a VPD guarantee; adapt it to actual equipment and climate.

Question 11

What is the maximum capacity for installing equipment at height without compromising stability and ease of access inside the Hydro Shoot tent 120x120x200cm V2?

Accepted Answer

The documented limit for Hydro Shoot HS120 V2 is 15 kg per bar · 30 kg total, distributed. Lamp watts and extractor m³/h do not indicate weight: add the masses of equipment, cables, hangers and accessories. Spread them across the intended bars without exceeding any limit. Do not hang a filled reservoir or use improvised reinforcement to increase capacity.Allow usable access around the 120 × 120 cm Hydro Shoot HS120 V2. Arrange pots and devices so doors open and plants and connectors can be reached without moving everything. Openings do not increase growing area; they make maintenance easier.

Question 12

Does the Hydro Shoot 120x120x200 Version 2 have good waterproofing, and can I easily install a hydroponic system inside without the risk of leakage?

Accepted Answer

A hydroponic system can stand on the floor if it and its maintenance access fit 120 × 120 × 200 cm. Add the reservoir, pump, irrigation and controls separately. Check filled-reservoir load on the room floor, remaining height under lighting and drainage access. A tent tray is not a reservoir or a guarantee against leaks; the enclosure does not regulate pH or humidity.

Question 13

Hydro Shoot 120x120x200 v2 compatible with easy addition of extra LED outputs to boost growth?

Accepted Answer

For 120 × 120 cm, choose lighting by plant needs, its PPFD map at the intended height, dimensions and required clearances. Tent size alone does not establish a maximum wattage. Watts certify neither hanging capacity nor a stable temperature; add suspended masses and test heat with equipment running. Without a specific light and measurement protocol, no PPFD or g/W increase can be given.The documented limit for Hydro Shoot HS120 V2 is 15 kg per bar · 30 kg total, distributed. Lamp watts and extractor m³/h do not indicate weight: add the masses of equipment, cables, hangers and accessories. Spread them across the intended bars without exceeding any limit. Do not hang a filled reservoir or use improvised reinforcement to increase capacity.

Question 14

What is the best ventilation setup to limit noise and odors without compromising air circulation in this Hydro Shoot 120x120x200cm V2 tent?

Accepted Answer

The Hydro Shoot HS120 V2 tent has no documented acoustic rating. Noise depends on the extractor, its speed, ducts and transmitted vibration. Use compatible connections (2 sleeves Ø 230 mm), avoid unnecessary bends and use intended fixings. For odours, match a carbon filter to actual airflow and avoid leaking connections; reducing airflow too far can allow heat and humidity to build up.

Question 15

What advice can you give to manage the differentiation of light and ventilation during the growth and flowering phases with the Hydro Shoot 120x120x200cm V2 tent?

Accepted Answer

Plants with compatible needs can share Hydro Shoot HS120 V2, but separate lights or timers do not create light- and air-isolated zones. Group plants by height, photoperiod and climate needs, leaving room for airflow. For truly different dark periods or climates, use purpose-designed separate enclosures or partitions with suitable ventilation; do not cut the cover to improvise two tents.Hydro Shoot HS120 V2 has 2 sleeves Ø 230 mm. These are openings, not built-in fans. Arrange the inlet and exhaust so fresh air does not immediately leave again, and provide suitable circulation around the foliage. Size actual airflow with the filter, bends and duct length in mind; check temperature and humidity, including after lights switch off. Air renewal cannot cool the enclosure below incoming-air temperature. Manufacturer configuration reference: 350 m³/h extraction with a filter. This is a sizing example, not measured installed flow or a VPD guarantee; adapt it to actual equipment and climate.

Question 16

What accessories can I attach to the Hydro Shoot 120x120x200cm Version 2 frame to optimize ventilation without exceeding the maximum load of 10 kg?

Accepted Answer

The documented limit for Hydro Shoot HS120 V2 is 15 kg per bar · 30 kg total, distributed. Lamp watts and extractor m³/h do not indicate weight: add the masses of equipment, cables, hangers and accessories. Spread them across the intended bars without exceeding any limit. Do not hang a filled reservoir or use improvised reinforcement to increase capacity.

Question 17

Is the Hydro Shoot 120x120x200 V2 tent sufficiently airtight to avoid odors, especially in hydroponic cultivation?

Accepted Answer

The Hydro Shoot HS120 V2 tent has no documented acoustic rating. Noise depends on the extractor, its speed, ducts and transmitted vibration. Use compatible connections (2 sleeves Ø 230 mm), avoid unnecessary bends and use intended fixings. For odours, match a carbon filter to actual airflow and avoid leaking connections; reducing airflow too far can allow heat and humidity to build up.

Question 18

Is it possible to integrate temperature and humidity sensors compatible with voice assistants for remote monitoring in the Hydro Shoot 120x120x200 cm V2 Secret Jardin tent?

Accepted Answer

Hydro Shoot HS120 V2 is a passive enclosure: it has no built-in connected sensor, app or voice control. You can add mutually compatible sensors and controllers, use the intended cable openings and check wireless coverage. Control of lighting, extraction and irrigation depends on equipment interfaces, not the tent. WebIT is a plant support net, not a home-automation system.

Question 19

What is the best ventilation configuration to adopt with the extraction and intake socks to maximize humidity control and heat dissipation in this 120x120x200 tent?

Accepted Answer

Hydro Shoot HS120 V2 has 2 sleeves Ø 230 mm. These are openings, not built-in fans. Arrange the inlet and exhaust so fresh air does not immediately leave again, and provide suitable circulation around the foliage. Size actual airflow with the filter, bends and duct length in mind; check temperature and humidity, including after lights switch off. Air renewal cannot cool the enclosure below incoming-air temperature. Manufacturer configuration reference: 350 m³/h extraction with a filter. This is a sizing example, not measured installed flow or a VPD guarantee; adapt it to actual equipment and climate.

Question 20

Is the ventilation configured with extraction and intake socks sufficient to limit heat without imposing an additional oscillating fan in the Hydro Shoot 120x120x200 V2 room?

Accepted Answer

Hydro Shoot HS120 V2 has 2 sleeves Ø 230 mm. These are openings, not built-in fans. Arrange the inlet and exhaust so fresh air does not immediately leave again, and provide suitable circulation around the foliage. Size actual airflow with the filter, bends and duct length in mind; check temperature and humidity, including after lights switch off. Air renewal cannot cool the enclosure below incoming-air temperature. Manufacturer configuration reference: 350 m³/h extraction with a filter. This is a sizing example, not measured installed flow or a VPD guarantee; adapt it to actual equipment and climate.

Assembled dimensions	120 × 120 × 200 cm
Nominal footprint	1.44 m² nominal
Nominal volume	2.88 m³
Reflective fabric	Mylar M210D
Pole diameter	Ø 19 mm
Net weight	9.5 kg
Hanging load	15 kg per bar · 30 kg total, distributed
Ventilation openings	2 sleeves Ø 230 mm
Cable openings	1 × Ø 75 mm
Growing equipment	Add lighting, extraction, air circulation, a filter if needed, pots and growing medium separately.
Floor tray	1 removable tray(s)

Dimensions	120 × 120 × 200 cm
Growing area	1.44 m² (nominal footprint)
Weight (kg)	9.5
Mylar density	M210D
Ventilation opening diameter (mm)	2 sleeves Ø 230 mm
Tube diameter (mm)	19 mm

Secret Jardin Hydro Shoot HS120 V2 – grow tent 120 × 120 × 200 cm

Choose your model

2 packs including this product

Choose your pack

Complete pack 120x120cm – SpectraWILD M650 - Hydroshoot 120 - Ventilation kit without carbon filter

Complete pack 120x120cm – SpectraWild M650 - HydroShoot Box 120x120x220 cm - Ventilation kit - Pots and potting soil

Product presentation

Your growing space.
1.44 m² of floor space.

120 × 120 cm: leave room for access.

What is included

What you need to add

Details that shape your setup

Reflective walls around the growing area

Air sleeves ready for ducting

An accessible base for cleaning

Assemble, equip, then check

Assemble the frame and cover

Position equipment with enough clearance

Test airflow with equipment running

Simple access for maintenance

Specifications: Hydro Shoot HS120 V2

A question about your setup?

A growing enclosure to equip for your plants.

Features detailed

Reviews customers

Après quelques jours d'utilisation

Acheté il y

Très efficace. Ça

Excellent produit. Après quelques

Cool

Your questions

Viewed recently

Write your review

Secret Jardin Hydro Shoot HS120 V2 – grow tent 120 × 120 × 200 cm

Choose your model

2 packs including this product

Product presentation

Your growing space.1.44 m² of floor space.

120 × 120 cm: leave room for access.

What is included

What you need to add

Details that shape your setup

Reflective walls around the growing area

Air sleeves ready for ducting

An accessible base for cleaning

Assemble, equip, then check

Assemble the frame and cover

Position equipment with enough clearance

Test airflow with equipment running

Simple access for maintenance

Specifications: Hydro Shoot HS120 V2

A question about your setup?

A growing enclosure to equip for your plants.

Features detailed

Reviews customers

Après quelques jours d'utilisation

Acheté il y

Très efficace. Ça

Excellent produit. Après quelques

Cool

Your questions

Viewed recently

More from Secret Jardin

Related articles

Write your review

Your growing space.
1.44 m² of floor space.