Question 1

Is it possible to use Canna Boost in combination with other fertilisers? If so, what would be the recommended proportion?

Accepted Answer

Of course, you can perfectly use Canna Boost with other fertilizers to improve the overall yield of your crops. In fact, Canna Boost is specifically formulated to be paired with base nutrients and offers excellent results when combined with a highly nutritious fertilizer such as Canna's PK 13/14. For use, Canna Boost can be applied in two ways: either as watering, as it is fully water soluble, or as foliar application. On the dosage side, always follow the manufacturer's instructions. As a rule, you can start using Canna Boost around the third week of flowering and continue until the end of the growth cycle. Also, remember to always shake the can well before use and store it in its original container. Stay vigilant on the respect of the recommended dosages, an overdose could hinder the absorption of nutrients by your plants. Delighted to note your interest in optimizing your indoor gardening and hoping that this information helps you to get abundant flowering!

Question 2

Does this flowering booster also work on small indoor plants like aromatic plants or is it reserved only for plants grown in the ground?

Accepted Answer

The flowering booster Canna BOOST is universal and can be perfectly used on small indoor plants like aromatic plants, not only in the ground. Its action stimulates the plant's metabolism regardless of size or substrate for optimal flowering. You can add it to your nutrient solution or spray it directly on the leaves. It is an effective ally to maximize the yield of your indoor herbs.

Question 3

What is the effect of CANNABOOST on the differentiated management of nutrient needs during the flowering phase compared to growth?

Accepted Answer

CANNABOOST acts as a specialized flowering stimulator, clearly differentiating the plant's nutritional needs between the growth phase and the flowering phase. It stimulates metabolism to enhance the absorption of essential nutrients necessary for the formation and development of flowers, thereby promoting increased volume and more consistent ripening of fruits.Unlike traditional fertilizers focused on vegetative growth, CANNABOOST specifically optimizes the flowering phase and works perfectly in synergy with other fertilizers like CANNA PK 13/14 for a complete supply during this crucial stage.

Question 4

What is the effectiveness of CANNABOOST in terms of grams per watt compared to a PK 13/14 regimen alone in an indoor cultivation?

Accepted Answer

Canna BOOST is an excellent flowering stimulator that works by enhancing the metabolism and photosynthesis of plants, allowing them to better utilize nutrients, especially those from PK 13/14. When used in conjunction with the latter, it promotes larger fruits, gradual maturation, and higher quality yields. However, there is no precise and reliable data regarding an exact gain in grams per watt compared to a PK 13/14 regimen alone in indoor cultivation. What is certain is that Canna BOOST optimizes the effectiveness of PK 13/14, which generally translates to better overall yield, but the extent of the gain will also depend on many factors related to the cultivation itself. For a complementary stimulator, you may also consider our selection of flowering boosters to maximize your results.

Question 5

Compatibility of Canna BOOST with an organic fertilization program in soil cultivation possible or risk of negative interactions to anticipate

Accepted Answer

Canna BOOST can be used with an organic fertilization program in soil cultivation, but one must remain vigilant. This booster is designed for an optimal regimen often based on conventional fertilizers, and mixing different brands or types of fertilizers can destabilize the substrate. In organic cultivation, fertilizers are generally made from natural compounds, which can create unexpected interactions with the synthetic ingredients of Canna BOOST. There is a risk of disturbing the chemical balance of the soil or chemical incompatibilities. Our advice: favor complementary products that respect organic principles to avoid any inconvenience. For a booster specifically suited for organic cultivation, you may consider 100% natural alternatives that are compatible with your organic fertilizers.

Question 6

What notable difference does this bloom booster bring in hydroponics compared to conventional soil use?

Accepted Answer

Canna BOOST acts more quickly and effectively in hydroponics due to the direct access of the roots to the nutrient solution. This optimizes absorption, allowing for rapid flowering stimulation, better size and quality of flowers, and increased resistance to diseases. In soil cultivation, the product must pass through the substrate, which slows its action. The dosage is a bit less precise, and the effect can be less immediate, with sometimes more frequent applications needed to achieve a comparable result. In summary, hydroponics allows for faster absorption and finer dosage, amplifying the benefits of Canna BOOST, while in soil its effects remain very positive but somewhat less instantaneous.

Question 7

Is Canna BOOST compatible with LED and hydroponic cultivation? What dosage should beginners follow for foliar spraying?

Accepted Answer

Canna BOOST is perfectly compatible with cultivation under LED lighting and hydroponic systems. This bloom booster stimulates photosynthesis and is suitable for all types of substrates, thereby improving the quality and yield of your plants, regardless of the cultivation method. For foliar spraying, beginners are advised to start with a low dosage, around 1 ml per liter of water. Apply the spray preferably in the evening or early in the morning to avoid any risk of burning due to light or heat. If the plants respond well, you can increase up to 2 ml/L. This method allows for rapid absorption of the booster through the leaves, complementary to its addition in the nutrient solution. Always monitor the response of your plants and adjust the dosage accordingly for optimal results.

Question 8

What is the actual percentage yield gain with CANNABOOST compared to a standard crop without a booster on an area of 1.5m x 1.5m?

Accepted Answer

The exact percentage yield gain with Canna BOOST compared to a crop without a booster on 1.5m x 1.5m is not precisely documented. However, this product effectively stimulates flower development and enhances nutrient absorption, which generally leads to a notable increase in yield and quality of the harvests. To maximize these effects, it is often recommended to combine Canna BOOST with PK 13/14, which provides the necessary elements for optimal flowering. This synergy allows for a denser and more vigorous flowering, resulting in a better overall yield, although the exact percentage will depend on specific growing conditions.

Question 9

What is the recommended application frequency to optimize flowering results without the risk of overdose with Canna Boost?

Accepted Answer

To optimize flowering with Canna BOOST - Bloom Booster, start using it as soon as the flowers appear, usually around the third week of flowering. Apply it with each watering throughout this period, respecting a precise dosage of 20 ml per 10 liters of water (1/500). This frequency and dosage ensure optimal effects without the risk of overdose. Canna BOOST works in synergy with fertilizers like CANNA PK 13/14 for even more effective results.

Question 10

What is the impact of using Canna BOOST on overall fertilizer consumption and should the usual doses be adjusted to avoid overdosing?

Accepted Answer

Canna BOOST is a supplement designed to stimulate flowering and improve flower quality, but does not replace base fertilizers containing essential elements like NPK. Its use adds to the usual fertilization program, which may slightly increase total fertilizer consumption. The specific compounds in Canna BOOST optimize the absorption of nutrients already present, benefiting the plant without allowing for a reduction in the usual fertilizer doses. It is important not to decrease the base fertilization on the pretext of using this booster. To avoid any overdosing, it is essential to strictly follow the recommended doses for Canna BOOST and adjust them according to the type of cultivation (soil, hydroponics), without altering those of the main fertilizers. This precaution ensures healthy growth and optimal balance in the substrate.

Question 11

How to optimize the use of CANNABOOST in combination with a PK 13/14 fertilizer to maximize flowering and aromatic quality in a multi-variety indoor cultivation?

Accepted Answer

To optimize flowering and aromatic quality with CANNABOOST and Canna PK 13/14 in multi-variety indoor cultivation, start applying CANNABOOST as soon as the first flowers appear. This stimulates the density and growth of floral buds.About 5 weeks after the flowering starts (when the flowers wrap around the trunk), integrate PK 13/14 at a rate of 15 ml per 10 liters of water, for 3 to 6 days. This phosphorus-potassium booster enhances flowering and resin production, complementing the metabolism activated by CANNABOOST.Be sure to maintain a precise nutritional balance and monitor the growing conditions (light, temperature, humidity) to encourage full aromatic expression. This results in lush flowering and aromatically rich plants, even in multi-varieties.

Question 12

How to integrate Canna Boost into a fertilization automation to automatically adjust doses according to the flowering phase and substrate type?

Accepted Answer

To integrate Canna BOOST into a fertilization automation, its application should be programmed from the beginning of the flowering stage to effectively stimulate floral metabolism. The dose should be automatically adjusted according to the different flowering phases (initial, development, maturation), ensuring its supply is combined with a PK 13/14 booster, guaranteeing a balanced intake of phosphorus and potassium. The system should also modulate the frequency and concentration of Canna BOOST according to the substrate type (soil, coco, hydroponics), as absorption and water retention vary from one substrate to another. This modulation involves precise programming of dosing pumps. Finally, if your setup allows it, providing a foliar application can enhance its effectiveness. This precise coordination optimizes flowering and the quality of fruits or flowers in an efficient automated system.

Question 13

What are the yield gains in g/Watt observed with CannaBoost compared to PK13/14 alone in an optimized indoor cultivation?

Accepted Answer

Canna BOOST – Bloom Enhancer is a high-performance flowering stimulant that optimizes nutrient absorption and accelerates photosynthesis, increasing the size, density, and quality of flowers in indoor cultivation. Compared to the use of PK 13/14 alone, it overall improves the yield in g/Watt due to better nutrient assimilation and a strengthened immune system. However, there are no precise data or published quantitative studies directly comparing the exact gains in yield in g/Watt between CannaBoost and PK 13/14 alone in an optimized cultivation. Nonetheless, the combination of the two is generally recognized to maximize floral production and plant robustness, thereby increasing the total yield. In summary, CannaBoost supplemented with PK 13/14 promotes a better yield than PK 13/14 alone, although the exact increase in g/Watt is not precisely quantified.

Question 14

Is integration possible with an automated fertilization system to adjust CANNABOOST doses based on flowering phases?

Accepted Answer

Canna BOOST – Bloom Enhancer is fully compatible with integration into an automated fertilization system. Indeed, it can be added directly to the nutrient solution, allowing for precise dose adjustments according to different flowering phases. This product acts as a stimulant that promotes flowering and nutrient efficiency, rather than as a traditional mineral fertilizer. Its use in combination with an automated system relies on the latter's ability to adjust inputs based on the plant's stage. Thanks to its compatibility with all types of cultivation and substrates, Canna BOOST fits perfectly into your custom schedules.

Question 15

Can CANNABOOST be used in conjunction with a complete fertilizer like PK 13/14 to optimize flowering without the risk of over-fertilization or plant damage?

Accepted Answer

The Canna BOOST - Flowering booster can be safely used in conjunction with a complete fertilizer like Canna PK 13/14 to optimize flowering. This combination is effective because Canna PK 13/14 provides essential phosphorus and potassium for flowering, while Canna BOOST stimulates plant metabolism, amplifying results. It is crucial to adhere to the recommended doses: apply Canna PK 13/14 only once about 3 weeks before harvest and Canna BOOST from the first signs of flowering until the beginning of rinsing, often at low doses (about 1 ml/L). Following this protocol avoids any risk of over-fertilization or burning. Both products are compatible with various substrates and cultivation systems, allowing for reliable combined use to maximize quality and density of flowers.

Question 16

What is the optimal concentration of Canna Boost per liter to maximize yield and flavor during flowering without the risk of overdose?

Accepted Answer

To maximize yield and flavor with Canna BOOST - Flower Booster, the optimal concentration is between 2 ml and 4 ml per liter of water. A dosage of 2 ml/l is ideal from the beginning of flowering, while 4 ml/l will allow for a more intense effect without the risk of overdose, provided that dilution is respected and the solution is used fresh (within 7 days).This dose promotes better photosynthesis and stimulates sugar production, thereby enhancing the quality and flavor of the flowers. For even better results, it is recommended to combine Canna BOOST with a PK fertilizer like PK 13/14, used at a rate of 1.5 ml/l, for optimal nutrient absorption.

Question 17

Canna BOOST, how does this booster interact with a PK 13/14 regime under LED to optimize the density and flavor of the buds without overloading the plant?

Accepted Answer

Canna BOOST works in perfect synergy with a PK 13/14 regime to stimulate flowering under LED lighting. It enhances the plants' metabolism and photosynthesis, allowing better absorption and utilization of essential phosphorus and potassium nutrients provided by PK 13/14. Thanks to this interaction, your flowers develop increased density and a more progressive maturation, which also optimizes flavor. In LED cultivation, where intense light increases nutrient demand, Canna BOOST helps maximize yields while avoiding overload through this improved metabolic efficiency.

Composition	Oligosaccharides, 1,2% anhydride phosphorique (P2O5)
Growing medium compatibility	Universal
Growing type	All types
Type	Booster floraison
Recommended dosage	20-40 ml/10L
Action	Stimule photosynthèse, métabolisme, énergie cellulaire pour sucres et hydrates de carbone
PK	1.2

Canna BOOST - Flowering booster

2 packs including this product

Choose your pack

CANNA Terra Medium Kit — GrowLED selection

CANNA Terra Pro Kit — GrowLED selection

Product presentation

Features detailed

Reviews customers

Your questions

Viewed recently

Write your review