SpectraMODULE

There are no products in this category.

BloomLED SpectraMODULE: Modular LED Lighting That Adapts to Your Crops

BloomLED SpectraMODULE modules revolutionize the approach to indoor grow lighting with their intelligent modular design. These LED units allow you to create a custom lighting system, expandable as your grow space evolves. Each module integrates high-efficiency diodes with an...

BloomLED SpectraMODULE: Modular LED Lighting That Adapts to Your Crops

Why choose BloomLED SpectraMODULE modules?

The strength of SpectraMODULE lies in their total flexibility. Unlike fixed LED panels, these modules allow you to start with a basic configuration and add units as you go. The X135, for example, effectively covers 60x60cm in flowering with its 135W real power, but you can easily double the surface by adding a second module. The full-spectrum integrates 3000K and 5000K white diodes, complemented by 660nm red and 730nm infrared for optimized photosynthesis.

The major technical advantage is thermal management. Each module has its own aluminum heatsink and passive ventilation, avoiding hot spots found on large panels. The operating temperature remains below 45°C even when continuous, preserving the efficiency of the Samsung LM301H diodes which reach 2.7 µmol/J. Frankly, this is equipment that lasts.

How to choose your SpectraMODULE configuration

To size correctly, count approximately 35-40W real power per square foot (30x30cm) in flowering. The SpectraMODULE X135 therefore perfectly covers 60x60cm at 90cm height, with a PPFD of 800-900 µmol/m²/s at the center. For larger spaces, it's better to multiply the modules rather than increasing the distance - you maintain a homogeneous distribution.

The BloomLED control console is almost indispensable if you want to exploit the potential of the modules. It allows you to program light cycles, adjust intensity by channel (warm white, cool white, red, infrared) and even simulate a progressive sunrise/sunset. Wiring is done in series with RJ45 connectors, super simple to install.

In terms of scalability, each console can control up to 50 modules simultaneously. You can therefore start small and expand your installation without changing the control system. This is particularly clever for growers who test different varieties with specific light requirements.

Frequently Asked Questions

What grow area does the SpectraMODULE X135 cover exactly in flowering?

The SpectraMODULE X135 optimally covers a 60x60cm area during the flowering phase, positioned at a height of 60-90cm. At this distance, it delivers a PPFD of 800-900 µmol/m²/s at the center and 600-700 µmol/m²/s at the edges, which corresponds to the intensive light requirements of flowering. For vegetative growth, you can move it further away to 100-120cm to cover up to 80x80cm with a more moderate PPFD of 400-500 µmol/m²/s. This modularity allows for precise adaptation of lighting according to the development phase.

How do I connect the SpectraMODULE X135 to the BloomLED console for control?

The connection is made via a standard RJ45 cable supplied with the module, which plugs directly into the "Module Out" port of the BloomLED console. The system works in series: if you have several modules, you connect the first to the console, then daisy-chain the others together with additional RJ45 cables. Each module is automatically detected by the console once powered. You then just need to configure the address of each module in the console interface to control them individually or in groups. The power supply remains independent with the supplied 24V power adapter.

Is the SpectraMODULE X135 compatible with other BloomLED modules to expand my setup?

Absolutely, that's precisely the whole point of the BloomLED modular system. All SpectraMODULE modules (X135, X200, X300) are perfectly compatible with each other and are controlled from the same console. You can mix different power levels according to your needs: for example, use X135s for peripheral areas and X200s for the center of your space. The BloomLED console can manage up to 50 modules simultaneously, allowing for very large installations. Each module retains its unique address, so you can control them individually or create groups with different light programs.

How do I adjust the spectrum of the SpectraMODULE X135 between growth and flowering via the console?

The BloomLED console offers optimized presets: "Growth" favors cool whites (5000K) at 70% with 30% warm whites, while "Flowering" reverses the ratio with 70% warm whites (3000K) and adds 20% 660nm reds plus 10% 730nm infrareds. You can also create your own recipes by manually adjusting each channel in 1% increments. The transition between phases can be programmed gradually over several days to avoid light stress. Experienced growers particularly appreciate the "Sunrise/Sunset" mode which simulates a natural sunrise and sunset by automatically modulating color temperature and intensity.

Does the SpectraMODULE X135 require special maintenance, or do the LEDs last a long time without maintenance?

The Samsung LM301H diodes equipping the SpectraMODULE X135 have an advertised lifespan of 50,000 hours, which is approximately 6-7 years of operation 18 hours/day. Maintenance is limited to monthly dusting of the heatsink fins with a dry brush or compressed air to maintain thermal efficiency. Absolutely avoid water or solvents that could damage the circuits. The integrated electronic driver is also designed for this lifespan, without electrolytic capacitors that could age prematurely. The 3-year BloomLED warranty also covers any early failures, which demonstrates the reliability of the equipment.

Less

How to choose LED lighting for indoor growing?

To choose the right LED lighting, I advise you to consider several key factors. First, the size of your grow space is paramount to determine the area to cover. Then, the type of plants you are growing and their light requirements at each stage (growth, flowering) are essential. Finally, your budget and the possibility of upgrading your setup are elements to consider. SpectraMODULEs, with their modularity, are an excellent option to adapt to these different needs.

What LED wattage should I choose for my grow?

The ideal LED wattage depends directly on the grow surface area and the light requirements of your plants. As a general rule, I recommend aiming for approximately 30 to 50 actual watts per square foot (or 0.09 m²) for most crops. With SpectraMODULEs, you're not stuck: you can add or remove modules to adjust the power and light intensity as your crop evolves, which is a significant advantage.

What is the difference between SpectraMODULE and HPS?

The main difference lies in efficiency and spectrum. SpectraMODULEs use high-efficiency LED diodes, offering a precise and adjustable light spectrum, which allows for better absorption by plants and reduced electricity consumption. HPS (High-Pressure Sodium) lamps, although powerful, have a less optimized spectrum and generate much more heat, requiring more ventilation. In practice, with LEDs, you often get better harvest quality and substantial energy savings in the long run.

What is the purpose of the adjustable spectrum of BloomLED SpectraMODULEs?

The adjustable spectrum is a major asset of SpectraMODULEs. It allows you to customize the light composition emitted to precisely meet the needs of your plants at each phase of their life cycle. For example, I recommend a spectrum richer in blue for vegetative growth and a spectrum more oriented towards red to stimulate flowering and fruiting. This flexibility allows for optimizing photosynthesis and improving the vigor and yield of your crops.

How to install SpectraMODULE modules?

The installation of SpectraMODULEs is designed to be simple and intuitive. Each module typically attaches to a support structure (like a frame or hanging bars) and connects to the BloomLED console. I advise you to carefully follow the user manual provided with your modules for secure mounting and correct electrical connection. The advantage is that you can easily add or move modules if your space or needs evolve.

Are SpectraMODULEs suitable for cannabis cultivation?

Absolutely! SpectraMODULEs are particularly well suited for cannabis cultivation. Their high-efficiency diodes and adjustable spectrum allow them to provide precisely the light needed at each stage of the plant's development, from germination to flowering. The ability to modulate intensity and spectrum is crucial for maximizing terpene and cannabinoid production, which I often see as a major advantage for demanding growers.

How do I know if SpectraMODULE is suitable for my grow space?

To determine if SpectraMODULEs are suitable for your space, I invite you to precisely measure the surface area of your grow zone. Thanks to their modular design, you can assemble the necessary number of modules to perfectly cover this surface, whether it is small or large. The advantage is that you are not limited by a fixed lighting size. If you have any doubts, do not hesitate to contact me with the dimensions of your space, I can guide you towards the ideal configuration.