01 — Description
Présentation du produit
Optimize your harvests with the Florastar TI 500W Full Spectrum Led panel, specially designed for indoor horticulture and ideal for a growing area of 120x120cm. Featuring a sleek brushed aluminum design, this panel offers a practical and efficient solution to meet your growing and flowering needs.
Technical characteristics :
Power and Spectrum: The Florastar TI 500W panel is equipped with 1224 San'an 3000K+4000K LEDs and 48 Deep Red 660nm LEDs. This combination offers a full spectrum suitable for all phases of your plants' growth and flowering.
Advanced Design: The fanless design makes this panel quiet and avoids issues related to overheating. Its practicality is enhanced by its ability to be positioned just 40cm above the canopy of your plants, thus ensuring uniform light distribution.
Full Spectrum Technology: The new generation San'an 2835 LEDs are distributed over 6 bars and protected by a nano coating, ensuring high waterproofing and superior light transmission than standard plastic coatings.
Driver with power variator: Powered by a high-performance driver, the panel offers total control over light intensity, thus adapting precisely to the changing needs of your plants.
Light distribution tested and approved:
Tests carried out in 120x120cm and 150x150cm growing boxes confirm optimal light distribution of the Florastar TI 500W, ensuring uniform coverage for all your plants.
Technical specifications :
- Brand: FLORASTAR
- Recommended use: Growth and Flowering
- Usable in: Interior
- Number of sockets: Mains wired 1.80 m
- Dimensions: 870 x 755 x 103 mm
- Power in Watts (W): 500 W
- Voltage in Volt (V): 220-240 VAC
- Intensity in Ampere (A): 2.4 A
- Frequency in Hertz (Hz): 50 Hz
- Warranty: 3 years
- Color temperature in Kelvins (K): 3000K + 4000K + 660nm
Opinion from an expert grower:
"The Florastar TI 500W panel has revolutionized my indoor growing. Its advanced design and full spectrum have considerably boosted the growth and flowering of my plants. The uniform light distribution has allowed me to obtain exceptional results. An investment that definitely worth it."
Frequently asked Questions :
What is the ideal distance between the panel and my plants?
- The recommended distance is at least 40cm above the canopy.
How to adjust the light intensity?
- The panel is equipped with a driver with power variator for precise control.
What is the lifespan of the panel?
- The Florastar TI 500W benefits from a 3-year warranty, ensuring exceptional longevity.
Can I use this panel for all growth phases?
- Yes, full spectrum is suitable for both growing and flowering.
Is the panel compatible with all indoor crops?
- Yes, whether you grow in soil, hydroponically or in coco, the Florastar TI 500W is suitable for all indoor crops.
04 — Questions sur ce produit
Product questions
Your questions about this product
- Does the Florastar TI 500W panel allow easy integration with an automation system to automatically adjust light intensity according to the growth phase?
The Florastar TI EX 500W panel does not explicitly specify the presence of a built-in dimmer or an RJ port for remote control, making its native compatibility with an automation system to adjust light intensity uncertain. However, other models in the Florastar TI range generally have a dimmer and a remote control port, facilitating integration into automated systems. It is therefore reasonable to assume that this 500W model offers a similar possibility, probably via an external controller, but without direct confirmation, it is prudent to consider this as to be checked. If automatic light intensity management is an important criterion for you, do not hesitate to consult us; we will be able to advise you on alternatives or compatible systems.
- Is the brightness variation easy to adjust and precise enough for a beginner like me?
The Florastar TI EX 500W Led Panel includes a driver with a power dimmer, which greatly facilitates brightness adjustment. This system offers precise and easy control, even for a beginner. You can easily adjust the light intensity according to the needs of your plants, making it ideal for learning and optimizing your indoor cultivation.
- What is the recommended method to gradually adjust the light intensity between the growth phase and the flowering phase with this Florastar TI EX 500W LED panel to optimize the differentiated management of growth and flowering in indoor cultivation?
To gradually adjust the light intensity of the Florastar TI EX 500W LED Panel between growth and flowering, it is recommended to use the integrated dimmer on the panel's driver. During the growth phase, set the power to about 60-70% for a more intense light that promotes vegetative development thanks to the 3000K+4000K LEDs. In the flowering phase, gradually decrease the intensity to 40-50%, benefiting from the Deep Red 660nm LEDs that stimulate flowering.
For more advanced control, integrating an external controller is possible to automate these variations, even if the panel does not natively support remote control. Carefully monitor the plants' evolution to fine-tune the light and avoid any stress.
This method ensures a smooth transition between stages and an optimal management of your indoor cultivation with this high-performing panel.
- What is the ideal procedure to adjust the power dimmer of the Florastar TI EX 500W panel to optimize the differentiated management between growth and flowering in a 120x120cm box?
To optimize the adjustment of the Florastar TI EX 500W dimmer in a 120x120 cm box, it is ideal to adapt the light intensity to the growth and flowering phases:
Growth phase: reduce the power to about 60-70% to provide full lighting while limiting heat and consumption, promoting healthy development of leaves and stems.
Flowering phase: gradually increase to 100% to maximize light input, especially in the Deep Red spectrum (660 nm), thus stimulating floral and fruit production.
The integrated dimmer of the panel allows for precise and silent power adjustment. Be sure to monitor the temperature in the box to avoid thermal stress and adjust according to your plants' reactions.
- What is the average electrical consumption in amperes of the Florastar TI EX 500W panel during continuous operation, and is it really risk-free from overheating without additional fan?
The Florastar TI EX 500W panel consumes on average about 2.4 amperes during continuous operation under a standard voltage of 220-240 volts.
Regarding the risk of overheating, this model benefits from a protective nano-coating and a driver with dimming capability, optimizing thermal management. However, it is not guaranteed to be risk-free from overheating without an additional fan. As with most horticultural LED panels of this power, good ventilation, whether passive or active, is recommended to avoid any thermal issues, especially in confined spaces.
If you are looking for a panel with enhanced thermal dissipation or equipped with an integrated cooling system, feel free to consult our horticultural LED catalog.
- Can the Florastar TI 500W panel support continuous operation in SCROG with very tight LST without the risk of thermal degradation affecting the LEDs at a height of 40cm?
The LED panel Florastar TI EX 500W is perfectly designed for continuous operation in SCROG with very tight LST techniques at a height of 40 cm. Its fanless design with an aluminum heatsink ensures efficient heat dissipation, minimizing the risk of thermal degradation of the LEDs.
However, in a dense SCROG environment, it is essential to ensure good ventilation to avoid heat buildup on the canopy and preserve the longevity of the panel. With adequate ventilation, this panel will support you without worry throughout your growing cycle.
- What is the minimum distance actually recommended to avoid thermal stress on a 120x120 crop with a TI EX 500W panel?
For an indoor crop under a Florastar TI EX 500W panel on an area of 120x120 cm, the minimum recommended distance to avoid thermal stress is about 40 cm above the canopy. This height ensures optimal light diffusion while limiting the heat felt by the plants, thus preserving their growth and health.
You can also finely adjust this distance using the dimming function of the panel, which allows you to reduce the light power and thus the temperature, without significant loss of yield.
- Can the light intensity be adjusted independently for each growth phase to optimize yields when rotating two different crops in parallel in the same 120x120 cm box?
The Florastar TI EX 500W LED panel allows for overall light intensity adjustment from 0 to 100%, but this adjustment applies to the whole panel and not independently by zone or growth phase. Thus, if you are growing two different plants in parallel in a 120x120 cm box, it will not be possible to separately adjust the light for each.
To optimize your yields with two crops having distinct light requirements in the same space, it is better to use multiple separate panels, each set to their preference, or a multi-zone lighting system. The Florastar TI EX 500W does not offer this type of separate control.
- What is the average actual power consumption of this Florastar TI EX 500W LED panel with a dimmer set between 50 and 100 percent?
The Florastar TI EX 500W panel features a built-in dimmer that allows adjusting the consumption from 0 to 100%. At full power (100%), the consumption is close to 500 W. At 50%, it drops to approximately 250 W.
If you use the dimmer between 50 and 100% in a balanced manner (for example, 50% of the time at 50% and 50% of the time at 100%), the average power consumption will be about 375 W. This figure may vary based on your actual usage profile, but it clearly illustrates the linear operation of the dimmer on consumption.
This management allows optimizing power consumption according to growth or flowering needs while maintaining effective lighting.
- What is the best method to manage the power of the Florastar TI EX 500W panel between growth and flowering to optimize growth while avoiding light stress on plants?
To optimize growth with the Florastar TI EX 500 W panel while avoiding light stress, it is ideal to use the integrated dimmer to adjust the power:
- During the growth phase, favor a moderate intensity, below the maximum power, to promote healthy development without stressing the plants.
- During the flowering phase, slightly increase the power and take advantage of the rich spectrum of Deep Red 660 nm LEDs that stimulates flowering.
This panel delivers a full spectrum very close to natural light (3000K, 4000K + Deep Red), ideal for every stage. Adjusting the light intensity according to the plant's sensitivity and phase allows for optimizing growth while minimizing the risk of stress.
- Does the Florastar TI EX 500W LED panel allow stable progressive dimming without an additional escartr to adjust the power according to the growing phases in hydroponics?
The Florastar TI EX 500W LED Panel offers precise control of light power thanks to its integrated dimmable driver. It allows for a stable progressive dimming from 0 to 100% without requiring an additional escartr, making it ideal for adjusting intensity according to the growth phases in hydroponics. This system ensures optimal light adaptation while maintaining energy efficiency and uniform distribution, all with silent operation.
- What is the ideal light intensity to optimize a SCROG with the Florastar TI EX 500W panel over a surface of 120x120cm, and how to adjust the driver to avoid stretch while maximizing flowering under full spectrum LED?
For a SCROG of 120x120 cm with the Florastar TI EX 500W panel, the ideal light intensity is between 400 and 800 µmol/m²/s, adjustable depending on the vegetative or flowering phase. During the growth phase, maintain a power around 50-60% via the integrated dimmer to limit stretch and promote a compact structure.
Place the panel about 40 cm above the canopy to ensure good light distribution while avoiding overheating. When transitioning to flowering, gradually increase the power to 80-100% to maximize yield while monitoring temperature and humidity.
This fine management of the driver allows optimizing growth without excessive elongation of the stems, while ensuring a full spectrum suitable for each stage of cultivation.
- Is the Florastar TI EX 500W LED panel easy to integrate into an existing system with a LED upgrade or do you really need to change everything?
The Florastar TI EX 500W LED panel includes a driver with a progressive dimmer, which greatly facilitates its integration into an existing LED upgrade system without needing to replace everything. You can adjust the light intensity from 0 to 100% overall, without the need for additional equipment.
However, this adjustment applies to the entire panel and does not allow for independent management of multiple zones or cultivation phases. If you need very precise or multi-zone control, you should consider using multiple panels or a more sophisticated system.
In summary, for a simple installation with global adjustment, the Florastar TI EX 500W integrates easily without complete replacement. For more complex configurations, a multi-panel solution will be more suitable.
- What is the ideal method to manage the transition between growth and flowering with the Florastar TI EX 500W LED panel to optimize both light intensity and exposure duration in an indoor culture on 120x120cm?
To optimize the cultivation on 120x120 cm with the Florastar TI EX 500W LED panel, it is essential to manage the transition between growth and flowering by adjusting light intensity and duration of exposure.
During growth, set the intensity to 60-70% of the maximum power to favor the 3000K and 4000K spectrum, ideal for vegetative development, with a daily light duration of about 18 hours.
During flowering, reduce the intensity to 40-50%, highlighting the Deep Red LED (660 nm) that stimulates flowering, and decrease the photoperiod to 12 hours to simulate the natural shortening of days.
The built-in dimmer allows for a smooth transition without stress, ensuring uniform lighting over your surface due to its power and adapted luminous efficacy. Don’t hesitate to regularly observe your plants to adjust these parameters according to their reaction.
- What is the average electrical consumption in normal usage hours, and does the panel generate a lot of heat requiring additional ventilation?
Electrical consumption: the Florastar TI EX 500W panel consumes approximately 500 watts at full power. With its built-in dimmer, you can adjust the power between 0 and 100%, which places the average consumption in normal use (50 to 100%) around 375 watts.
Heat generated: this horticultural LED panel emits significantly less heat than traditional lamps (HPS, MH) thanks to its advanced technology and good thermal dissipation. However, it still emits a noticeable amount of heat, especially in enclosed spaces.
It is therefore recommended to install simple additional ventilation, such as an extractor fan or airflow, to avoid overheating and ensure an optimal environment for your plants.
- What is the light efficiency in micromoles per joule (umol/J) of the Florastar TI EX 500W panel under optimal conditions and which exact driver is it equipped with to maximize g/Watt?
The Florastar TI EX 500W panel offers a very high light efficiency, ranging between 2.5 and 2.8 micromoles per joule (µmol/J) under optimal conditions, with a PPF of 1792 µmol/s for 500W consumed. It is equipped with next-generation San'an 2835 LEDs, distributed over 6 bars and providing a full spectrum including 3000K, 4000K, and deep red 660 nm.
The driver, sold separately and optional, is specifically designed to maximize photosynthetic efficiency in g/Watt. It features a 0-100% dimmer allowing precise adjustment of consumption, thus optimizing growth and flowering.
This LED and driver combination, along with a robust IP65 design, ensures uniform lighting and excellent thermal dissipation for stable and efficient performance.
- How to optimize SCROG with this Florastar TI EX 500W LED panel for a dense canopy on 120x120cm by adjusting the light intensity and distance to avoid overheating without a fan?
For a dense SCROG on 120x120 cm with the Florastar TI EX 500W, place it about 40 cm above the canopy to ensure even distribution and limit overheating without a fan. In the growth phase, set the intensity between 50 and 60 % of the dimmer (approximately 400-800 µmol/m²/s) to encourage a compact structure and good filling.
During flowering, gradually increase to 80-100 % to maximize production while monitoring the temperature to avoid thermal stress. The integrated dimmer is a key asset to adjust the power and limit heat, thus allowing you to optimize the canopy without needing additional ventilation.
- What is the best strategy to manage light intensity with the Florastar TI EX 500W panel to optimize growth and flowering in an indoor cultivation area of 120x120cm?
To optimize growth and flowering with the Florastar TI EX 500W panel on 120x120 cm, the best strategy is to gradually adjust the light intensity via the integrated dimmer:
- Growth phase: start around 50-70% intensity for healthy vegetative development without light stress.
- Flowering phase: gradually increase to 100% to maximize light energy and promote rich and dense flowering.
- Be careful to avoid abrupt changes in intensity to maintain plant health.
- Make sure to properly adjust the height of the panel for even distribution over the entire area.
This overall light management, although not segmented by zones, fully exploits the complete spectrum of the Florastar TI EX 500W, balancing performance and energy consumption for optimal results.
- What is the average power consumption at full power and does the panel really heat less than a model with a fan?
The Florastar TI EX 500W Led Panel consumes approximately 500 W when operating at full power (100%), which is about 2.4 amperes at a voltage of 220-240 V. It features an integrated dimmer that allows you to adjust the power, for example to 250 W at 50%.
In terms of heating, this panel is designed with a protective nano-coating and a driver with an integrated dimmer that allows for optimized thermal management without a fan. This means it heats less than a model with active ventilation, while remaining quieter and more reliable thanks to this passive heat dissipation.
- Is it possible to integrate the Florastar TI EX 500W LED panel into a home automation system with voice assistant control and real-time temperature/humidity monitoring to automate optimized lighting and watering?
The Florastar TI EX 500W LED panel features a driver with a dimmer, allowing for easy modulation of light intensity for optimized growth and flowering.
However, it does not have native home automation connectivity or standardized interfaces (like RJ45 or Wi-Fi) for voice control or autonomous monitoring of temperature and humidity.
To integrate this panel into a home automation system with voice assistant management and real-time tracking of environmental conditions, third-party solutions will need to be combined: a compatible controller that can manage the signals from the driver, temperature/humidity sensors, and a suitable smart home hub (e.g., Home Assistant, Jeedom, Alexa, Google Home).
In summary, advanced automation is achievable, but it will require supplementary installation involving external devices and interfaces.
- What is the average electrical consumption during peak hours at 100 percent capacity and how does the panel manage thermal distribution without a fan in a confined space?
The Florastar TI EX 500W panel consumes approximately 500 watts at peak hours at 100% of its power, in accordance with its rated electrical power. It operates at a voltage of 220-240 V with a current of about 2.4 A.
For thermal management, this model relies on very efficient passive dissipation thanks to its aluminum chassis, which acts as a natural heatsink. The six LED bars, protected by a nano-coating, optimize heat transfer while ensuring good insulation and optimal light transmission. This fanless design limits noise disturbances and avoids dust accumulation, making it particularly suitable for confined spaces.
In summary, the combination of an aluminum heatsink and a protective coating ensures stable and silent thermal management, ensuring the longevity and performance of the panel even without an active ventilation system.
- What is the best method to manage the variation in light intensity of the Florastar TI EX 500W LED panel between the growth and flowering phases to optimize plant development without excess energy consumption?
To best manage the light intensity of the Florastar TI EX 500W LED panel between growth and flowering, the most effective solution is to use its built-in dimmer. During the growth phase, it is advisable to reduce the intensity to about 50%, in order to promote healthy development of young plants while limiting energy consumption. In flowering, the intensity can be gradually increased to 100% to maximize production and photosynthesis.
This overall adjustment of the panel allows you to tailor the power to your needs without electrical waste, but be aware that it does not allow for managing separate zones or plants. For crops at very different stages, it is better to consider using several panels or a multi-zone system.
In summary: switch to 50% during growth, then 100% during flowering, taking advantage of the dimmer to best balance plant development and energy consumption.
