01 — Description
Présentation du produit
Optimize the growth and flowering of your plants indoors with the FLORASTAR TI EX 750W horticultural LED panel. Designed with the best electronic components currently available on the market, this Full Spectrum LED panel guarantees exceptional performance for your crop. With an elegant brushed aluminum design, a fanless design, and the practicality of its folding, this panel is a high-end solution for demanding growers.
Advanced Technical Characteristics:
The FLORASTAR TI EX 750W LED panel is equipped with the latest generation San'an 2835 LEDs (2592 x 3000K+4000K - 192 x 660nm) and an integrated driver with power variator. This cutting-edge technology ensures even distribution of the light spectrum, thus promoting vigorous growth of plants throughout their life cycle. The power of 750W is perfectly suited for a growing area of 150x150cm.
Practical and Aesthetic Design:
Its elegant brushed aluminum design brings a modern touch to your growing space. The fanless design ensures quiet, vibration-free operation, while its foldable capability provides flexibility of use. Position the panel just 50cm above the canopy of your plants for optimal results.
Advanced Full Spectrum Technology:
The Full Spectrum of the FLORASTAR TI EX 750W integrates the new generation of San'an 2835 LEDs distributed over 6 bars. Protected by a nano-coating, these LEDs offer superior waterproofing, guaranteeing much more efficient light transmission than conventional plastic coatings. With 2592 San'an 3000K+4000K LEDs and 192 Deep Red 660nm LEDs, this panel maximizes photosynthesis for thriving crops.
Technical characteristics :
- Brand: FLORASTAR
- Recommended use: Growth and Flowering
- Usable in: Interior
- Dimensions: 1114 x 1109 x 86 mm
- Power in Watts (W): 750 W
- Voltage in Volt (V): 220-240 VAC
- Current in Ampere (A): 3.6 A
- Frequency in Hertz (Hz): 50 Hz
- Warranty: 5 years
- Color temperature in Kelvins (K): 3000K + 4000K + 600nm
- Color Rendering Index CRI: 90 Ra
Opinion from an Expert Grower:
"The FLORASTAR TI EX 750W panel has truly transformed my indoor grows. Its exceptional power and full light spectrum have stimulated robust growth and abundant flowering. Additionally, its foldable design and quiet operation have greatly simplified my growing space . An investment worth every penny."
Frequently asked Questions :
What is the lifespan of the LEDs on the FLORASTAR TI EX 750W panel?
- Yes, the panel is equipped with a power dimmer to adjust the light intensity according to the needs of your plants.
What is the recommended coverage for this panel?
- The FLORASTAR TI EX 750W is optimal for a growing area of 150x150cm.
- Can this panel be used for all phases of growth and flowering?
- Yes, the Full Spectrum of the panel is suitable for all phases of the plant life cycle.
Is the FLORASTAR TI EX 750W panel easy to install?
- Yes, the panel comes with a 1.80m mains cable and is simple to install for immediate use.
04 — Questions about this product
Product questions
Your questions about this product
- To keep my bonsais healthy indoors during winter, access to this Florastar TI EX 750W LED panel with full spectrum would be ideal. My question is as follows: What is the minimum power level to maintain via the dimmer to ensure sufficient lighting without stressing my bonsais during their winter dormancy period?
To ensure sufficient lighting for your bonsais during their winter dormancy with the Florastar TI EX 750W LED panel, it is recommended to maintain the power around 25 to 50% using the dimmer. This setting provides enough light to preserve their health without causing stress. Feel free to adjust based on your plants' reactions, watching carefully for signs of overexposure.
- What is the precise PPFD curve of the FLORASTAR TI EX 750W panel at 50 cm above the canopy and its efficiency in g per watt on 150x150 cm?
The LED panel FLORASTAR TI EX 750W is recommended for a growth area of 150x150 cm with an installation height of about 50 cm above the canopy.
Regarding the precise PPFD curve at this distance, it is not officially published. However, this panel delivers a photon flux (PPF) of approximately 805 µmol/s with a remarkable light efficiency of 2.5 µmol/J. Its San'an 2835 LED configuration (3000K + 4000K + Deep Red 660nm) ensures a homogeneous and optimal spectrum for photosynthesis over the area of 1.5 x 1.5 m.
In terms of production efficiency, a solid yield is estimated between 0.9 and 1.1 g/W under optimal growing conditions. This means that with 750 W, you can obtain around 675 to 825 grams per cycle in this area.
- Can the power of the FLORASTAR TI EX 750W panel be adjusted to limit heat without significantly compromising luminous output?
The FLORASTAR TI EX 750W LED panel features a driver with power dimming, allowing you to adjust its intensity according to the needs of your crop. This function provides the option to limit the heat generated by reducing electrical consumption, while still maintaining excellent luminous output thanks to the latest generation San'an 2835 LED technology.
This power modulation is ideal for controlling thermal stress on your plants and adapting the lighting to your growing space, without significantly compromising the quality and quantity of light necessary for optimal growth.
- What is the maximum operating temperature of the FLORASTAR TI EX 750W panel under continuous operation to avoid premature degradation of the LEDs and optimize their efficiency?
The recommended maximum operating temperature for the FLORASTAR TI EX 750W panel under continuous operation is ideally below 40-45°C on the surface. This threshold preserves the integrity and performance of the San'an 2835 LEDs, which are sensitive to excessive heat. Although the manufacturer does not explicitly specify this value, it is a commonly accepted standard in horticultural LED lighting to prevent premature degradation of components while optimizing their luminous output.
- What is the average power consumption in practice of this FLORASTAR TI EX 750W LED panel with the dimmer set to 50 percent?
The nominal power consumption of the FLORASTAR TI EX 750W panel is about 750 W at full power. When the integrated dimmer is set to 50%, the consumption decreases proportionally to approximately 375 W in practice. This estimate is based on a linear operation of the dimmer, which is generally the case for this type of horticultural LED.
- How to manage the simultaneous cultivation of several varieties with different light needs under a full spectrum LED panel like the FLORASTAR TI EX 750W without compromising the growth and flowering of each?
To manage multiple varieties with different light needs under the
FLORASTAR TI EX 750W panel, the key lies in fine-tuning the intensity and positioning. The built-in dimmer allows you to adjust the power between 25% and 100%, so you can reduce the light for sensitive plants and increase it for those with high demand.
Position the panel at least 50 cm above the plants to avoid stress. Organize the varieties according to their light tolerance: place the most demanding ones under the most intense central area and the others at the periphery. Careful zoning and possibly using diffusers can help to even out the light.
The Full Spectrum of the FLORASTAR, combining 3000K LED, 4000K LED, and Deep Red 660nm, provides complete lighting suitable for the growth and flowering phases of each variety. Regularly monitor the condition of your plants to adjust the power via the dimmer based on their reactions, ensuring optimal growth without compromise.
- Can we optimize SCROG and LST under LED on 150x150cm with the FLORASTAR TI EX 750W panel without the risk of burning or significant shadow areas?
The LED panel FLORASTAR TI EX 750W is perfectly suited to optimize SCROG and LST over an area of 150x150 cm. Its uniform light distribution thanks to the six Full Spectrum LED bars minimizes shadow areas, ensuring an even exposure for all parts of your plants.
To avoid any risk of burning, it is essential to position the panel about 50 cm above the foliage. This setting ensures powerful lighting while limiting thermal stress, which is ideal for healthy development in SCROG or LST.
By combining a well-adjusted installation with these training techniques, you will fully optimize growth while preserving the quality of your plants under LED.
- What is the maximum operating temperature of the FLORASTAR TI EX 750W LED panel to avoid overheating in indoor cultivation?
The recommended
maximum operating temperature for the
FLORASTAR TI EX 750W LED panel is generally around
40°C in ambient temperature, similar to other Florastar models like the Ti PRO 670W. To avoid overheating during indoor cultivation, it is essential to ensure good ventilation and air circulation in the growing space.
The panel also features a power modulation system via its driver, allowing for heat reduction by adjusting its consumption. Thus, a well-ventilated environment and careful heat management will ensure optimal conditions for the successful development of plants.
- What is the average electrical consumption in dimmer mode at 50% power for prolonged use in a small space?
The average electrical consumption of the FLORASTAR TI EX 750W panel in dimmer mode at 50% power is approximately 375 watts. This setting reduces the power to half of its maximum capacity, allowing for effective heat management, particularly suited for small spaces, while maintaining powerful light thanks to the latest generation San'an 2835 LED technology.
- Does the integrated dimmer allow for fine adjustment to precisely adapt the power according to the size of the crop, or only a few fixed levels?
The FLORASTAR TI EX 750W LED Panel is equipped with an integrated dimmer, but it is not specified whether it offers fine power adjustment or only a few fixed levels. Generally, these dimmers allow you to adjust the light intensity to suit different crop sizes, but without specific information, it is difficult to guarantee the precision of this adjustment.
If you are looking for very precise control, feel free to explore other models in our selection that offer dimmers with more detailed settings, tailored to the specific needs of each growth phase.
- compatibility of the FLORASTAR TI EX 750W panel with a micro space cultivation of 60x60 cm?
The FLORASTAR TI EX 750W panel is designed to illuminate an area of approximately 1.5 x 1.5 meters, or 2.25 m². For a micro space of 60 x 60 cm (0.36 m²), its power of 750W is largely oversized. Even though the integrated dimmer allows for power reduction, it remains excessive and could stress your plants due to overly intense light and potentially high heat.
For this type of restricted space, we instead recommend an LED panel of around 100 to 200W, better suited to light needs and thermal management. This will ensure healthy and harmonious growth without unnecessary overconsumption.
- What are the actual light yields (in micromoles per second) and the exact power consumption of the FLORASTAR TI EX 750W panel on the standard area of 150x150 cm?
The FLORASTAR TI EX 750W panel offers a light yield of around 805 µmol/s (PPF), making it a powerful and efficient lighting option for a standard growing area of 150x150 cm. Its nominal power consumption is 750W, but thanks to its integrated dimmer, you can adjust the power and therefore the consumption according to your specific needs.
This adjustment allows you to optimize the lighting and consumption according to the growth phase of your plants while maintaining a high and uniform light quality over the targeted surface.
- Is it possible to integrate this FLORASTAR TI EX 750W LED panel with an existing home automation system to remotely adjust the light power and monitor parameters in real time?
The FLORASTAR TI EX 750W LED panel has a built-in driver with power dimmer allowing for manual brightness adjustment. However, there is no information confirming native compatibility with a home automation system for remote control or real-time parameter monitoring via a dedicated interface.
To integrate this panel into a home automation system, it would likely be necessary to use a compatible external controller with your home automation equipment. This type of adaptation requires precise technical verification of your home automation protocols and the type of input possible on the panel's dimmer.
If you are looking for a more easily integrable solution for home automation, feel free to check our other LED panels that might better suit this need.
- What is the optimal dimension size of the FLORASTAR TI EX 750W LED panel to manage multiple varieties with different light needs in the same room?
The LED panel
Florastar TI EX 750W is ideally suited for a growing area of about
120 x 120 cm, which is just over 1.4 m². This dimension allows for the management of several varieties with differing light requirements in the same room, thanks to its integrated dimmer, which precisely adjusts the light intensity from 0 to 100%. For optimal management, it is recommended to play with the height of the panel (about 40 cm above the plants) to homogenize the light.
If you cultivate a significant diversity of varieties with very different light requirements, using several individually adjusted panels will provide maximum flexibility to adapt the spectrum and power to each plant.
- Does the power dimmer of the FLORASTAR TI EX 750W panel allow for a sufficiently fine adjustment to optimize different growth stages in hydroponics?
The FLORASTAR TI EX 750W panel features an integrated power dimmer that offers very precise control of light intensity. This fine control allows for perfectly adapting the light to the different growth stages in hydroponics, from vegetative to flowering. With this modulation, you optimize photosynthesis and plant development by providing just the right amount of light at each phase.
- Is the power dimmer easy to adjust during full cultivation without interrupting plant activity?
The FLORASTAR TI EX 750W LED panel features an integrated dimmer that allows for easy adjustment of light intensity during cultivation, without interruption or negative impact on plant growth. This adjustment can be made directly on the device, ensuring a gradual adaptation of light to manage thermal stress or support the evolution of photosynthetic needs. Thus, you can modify the power without stopping the lighting or disrupting your crop cycle.
- Does the power dimmer allow precise adjustment of the light spectrum between growth and flowering, or is only the overall intensity adjustable?
The power dimmer of the FLORASTAR TI EX 750W LED Panel mainly allows for adjusting the overall intensity of the light. It does not provide precise adjustments of the light spectrum between the growth and flowering phases. For finer control of the spectrum, other models from the FLORASTAR range may better meet this need.
- What is the recommended minimum power with the dimmer to avoid the risk of harmful flickering over a prolonged period under this FLORASTAR TI EX 750W panel?
For the LED panel FLORASTAR TI EX 750W, to avoid any risk of harmful flickering during prolonged use, it is recommended not to go below 50% of the maximum power, which is approximately 375 W. This limit ensures optimal electrical stability and consistent lighting quality, essential for healthy plant growth.
- Can a separate timer be used for two Florastar TI EX 750W panels to run two crops in parallel with different cycles without the risk of overheating or electrical phasing?
It is indeed possible to use a separate timer for two Florastar TI EX 750W panels to manage different light cycles for two crops in parallel. Each panel has its own standalone driver, which eliminates any risk of electrical phasing. Regarding overheating, the fanless design with brushed aluminum housing and nano-coating ensures effective heat dissipation. Just be sure to maintain good ventilation and not overload your electrical circuit by checking the amperage of your installation. This configuration will allow you to optimize the growth of each crop with precise control over their lighting needs, without compromising safety or reliability.
- Is the power dimmer really easy to adjust during full cultivation without disturbing the plants?
The power dimmer of the FLORASTAR TI EX 750W LED Panel is really simple to use during full cultivation. It allows for a gradual and smooth adjustment of light intensity, without interruption or light shock for the plants. This smooth adjustment prevents any thermal stress or disruption, ensuring optimal development of your crops at every phase. You can thus modulate the light according to the specific needs of your plants, without impacting their health or cycle.
- What is the best strategy to manage the power of the dimmer during growth versus flowering with the FLORASTAR TI EX 750W panel in order to optimize yield and energy savings?
To optimize yield and energy savings with the FLORASTAR TI EX 750W, the secret lies in the fine management of the integrated dimmer. During the growth phase, a moderate setting between 50 and 70% intensity is sufficient for vigorous development while limiting consumption. As soon as the flowering phase begins, it is necessary to gradually increase power to 80 to 100% to maximize photosynthesis and flower quality thanks to the panel's rich red spectrum.
This precise and stable dimmer uniformly adjusts the lighting over the entire cultivation area (150x150 cm), ensuring uniform growth. Remember to install the panel about 50 cm above the foliage for optimal light distribution. This strategy thus allows for an excellent compromise between performance and energy control, fully exploiting the quality of the FLORASTAR TI EX.
- What is the best method to manage power via the integrated dimmer to optimize differentiated growth and flowering with the FLORASTAR TI EX 750W LED panel?
To optimize differentiated growth and flowering with the FLORASTAR TI EX 750W LED panel, the key is to adjust the power via the integrated dimmer gradually and precisely. During the vegetative growth phase, it is best to start with a moderate intensity, sufficient to promote strong photosynthesis without thermal stress. Then, gradually increase the power during flowering to meet the increased light requirements and maximize flower production.
This dimmer allows for continuous modulation without interruption or disruption of the plant cycle, providing optimal lighting control. Also, consider adjusting the height of the panel, keeping about 50 cm between the canopy and the light source to avoid burns and overheating.
Finally, if you are growing multiple varieties with different needs, using several panels with independent settings is an excellent solution for perfectly tailored lighting.
- What is the maximum temperature emitted by the Florastar TI EX 750W panel during continuous operation to optimize cooling without active ventilation?
The maximum temperature emitted by the Florastar TI EX 750W LED panel during continuous operation, without active ventilation, is not specifically stated. However, thanks to its brushed aluminum structure, it benefits from excellent passive heat dissipation.
The integrated power dimmer allows for modulation of the emitted heat by reducing consumption, for example to 50% power, which effectively limits temperature. To optimize passive cooling and avoid thermal stress on the plants, it is recommended to keep the panel at least 50 cm above the canopy and to adjust the power according to the needs of the crop.
- What is the light output in µmol/joule of the FLORASTAR TI EX 750W panel in 750W constant mode, and what is the efficiency over 150x150cm?
The FLORASTAR TI EX 750W panel offers an impressive light output of 2.7 µmol/joule in 750W constant mode. With a PPF of 1792 µmol/s, it ensures rich and stable light for your plants. Its optimal coverage is perfectly designed for an area of 150 x 150 cm, ensuring homogeneous and effective distribution of the light spectrum for healthy and prosperous growth.
- Compatibility of the FLORASTAR TI EX 750W LED panel with an external dimmer controller to optimize lighting in a micro space of 60x60 cm?
The LED panel FLORASTAR TI EX 750W features a manual dimmer driver that allows you to adjust the light intensity from 0 to 100%. However, it does not have a native port for external dimming control or direct integration via home automation.
In a micro space of 60x60 cm, the power of the panel may be too high, making fine control essential to avoid plant stress. The use of an external controller is theoretically possible but requires precise technical verification, complicating its installation.
For optimized and automated management in a small space, it is often better to choose LED lighting designed with native dimming control and home automation compatibility.
- What is the best method to adjust the power dimmer of the FLORASTAR TI EX 750W panel to optimize the differentiated management between growth and flowering?
To optimize the differentiated management between growth and flowering with the
FLORASTAR TI EX 750W, it is advisable to use the
integrated power dimmer to adjust the light intensity according to the needs of each phase. During growth, a moderate intensity promotes balanced development, while in flowering, gradually increasing the power maximizes photosynthesis and floral yield.
This variation should remain gradual to avoid any thermal stress, as the panel offers very practical continuous modulation. If multiple varieties are grown, using several panels individually adjusted allows for precise adaptation according to the light requirements of each plant.
Finally, always position the panel about 50 cm above the canopy for optimal lighting efficiency and good management of perceived intensity.
- What is the best strategy to integrate the power dimmer of the FLORASTAR TI EX 750W into an automatic lighting management according to the growth phases?
To effectively integrate the power dimmer of the FLORASTAR TI EX 750W into an automatic lighting management, it is essential to adjust the light intensity according to the growth phases. During the vegetative growth, set the dimmer between 50 and 70% of power, providing sufficient lighting without thermal stress. Then, during flowering, gradually increase the intensity to 80-100% to maximize the quality and yield of the flowers.
For optimal efficiency, place the panel about 50 cm above the canopy to ensure even diffusion over your growing area (150x150 cm). Finally, connect a programmable lighting controller that automatically adjusts the power of the dimmer according to the growth schedule, ensuring precise, energy-efficient management tailored to the plants' needs at each stage.
- Is the FLORASTAR TI EX 750W LED panel compatible with a hydroponic growing system, and can the light intensity be easily adjusted according to the growth phases?
The
FLORASTAR TI EX 750W LED panel is perfectly compatible with a hydroponic growing system. It is designed to ensure optimal growth and flowering, which is a real asset in a hydroponic environment where control of conditions is key.
Additionally, this panel features a power dimmer that allows you to easily modulate light intensity according to growth phases, from vegetative to flowering. This helps save energy while meeting the specific needs of your plants.
However, please note that the light spectrum is not precisely adjustable between different phases, but this device offers an excellent compromise for effective cultivation.
