Cli-mate Temperature Controller – 7 °C hysteresis, 7 to 16 A
- Progressive speed rise: no more abrupt starts and stops.
- Hysteresis band adjustable up to 7 °C for a stable microclimate.
- Two fan inputs: extractor and intake fan on the same setpoint.
- Independent minimum and maximum speed settings.
- Built-in sensor and mounting plate included. 7, 12 and 16 A versions.
Product presentation
Cli-mate Hysteresis Fan Controller
Smooth progressive rise • Band up to 7 °C • Two fan inputs • 7, 12 or 16 A
Instead of switching abruptly between low and high speed, this controller makes ventilation rise progressively as temperature drifts from the setpoint. The regulation band is adjustable up to 7 °C: that is what delivers a stable microclimate, without the swings of a simple thermostat.
You hear the difference: no more fan bursts starting and stopping every ten minutes. Speed follows the temperature instead of chasing it.
What “hysteresis” means here
The term refers to the temperature band across which speed evolves. Set the target to 25 °C with a 4 °C band: at 25 °C the fan runs at its minimum speed, at 29 °C it reaches maximum, and in between it climbs gradually. No steps, no abrupt switching.
Two potentiometers to frame the range
The minimum speed setting guarantees permanent air renewal, even when temperature is low. The maximum speed setting caps the level, letting you limit noise or protect a motor you would rather not push. Regulation works between those two bounds.
Two inputs, two fans
The unit offers an input on each side, letting you connect an extractor and an intake fan, or two extractors. Both follow the same setpoint, keeping incoming and outgoing air balanced without separate adjustment.
Three ratings to match your installation
The 7 A, 12 A and 16 A versions cover very different installation sizes. Add up the draw of the motors to be connected and pick the version above that total. The price gap between two versions is far smaller than the cost of replacing a controller that turned out too tight.
Technical specifications
- Device type : hysteresis temperature and fan controller
- Principle : progressive, continuous speed rise
- Hysteresis band : adjustable, up to 7 °C
- Adjustments : minimum and maximum speed potentiometers
- Fan inputs : two, one on each side of the unit
- Configuration : buttons
- Sensor : built-in indoor temperature sensor
- Current ratings offered : 7 A, 12 A, 16 A (depending on version)
- Mounting : rear mounting plate supplied
- Weight : approx. 2 kg
GrowLED tip :
A wide band (5 to 7 °C) gives the gentlest and quietest operation, but lets temperature climb further before full speed is reached. A narrow band (2 to 3 °C) reacts faster but edges toward thermostat behaviour. Start at 4 °C, then adjust based on what you observe.
Joseph – Directeur de GrowLED
Features detailed
| Brand | Cli-mate |
|---|---|
| Weight (kg) | 2 |
| Built-in thermostat | Oui |
| Hysteresis | Jusqu’à 7 °C |
| Number of outputs | 2 |
Reviews customers
Soyez le premier à donner votre avis !
Partagez votre expérience avec ce produit.
Your questions
Viewed recently









