C20 Aqua Master Tools — 2 dosing pumps for nutrients
The Aqua Master Tools C20 is a dosing unit with 2 peristaltic pumps to deliver 2 nutrients separately using a compatible controller.
Peristaltic pumps: 2
Use: Nutrients only
Indicative flow rate per pump: 1.5 ml/s, depending on liquid and temperature
Connection: UTP to compatible controller
Operating temperature: 5 to 50 °C
Priming: Manual button for each pump
Configuring your dosing setup
The C20 can manage two nutrient components, such as an A/B feeding programme. It connects to the controller or extends a C30. It does not have a UTP output for adding another module downstream.
What's included
The module, 2 lengths of 3 m tubing, a 150 cm UTP cable and a mains adapter are included.
Configuration limits
The controller supports a maximum of one pH pump and five nutrient pumps. C20 and C30 modules are not intended for pH adjustment. For this standalone unit, the controller and liquids to be dosed must be purchased separately.
Commissioning
Install the tubing as instructed, prime each channel and check the actual volume delivered with your liquids. Flow rate depends, among other factors, on viscosity and temperature. Check the peristaltic tubing regularly for wear.
C20 Aqua Master Tools — 2 dosing… 439,00 €
