P700 Pro 2 Aqua Master Tools — pH, EC and temperature monitor

P700 Pro 2 Aqua Master Tools — pH, EC and temperature monitor

The Aqua Master Tools P700 Pro 2 continuously monitors the pH, conductivity and temperature of a nutrient solution. Its large LED display makes readings easy to check beside the reservoir.

Keep your readings in view

This monitor suits an installation where you want to check values regularly without dipping a pen into the solution for every reading. It displays the solution's parameters; it is not a dosing pump or an automatic pH correction system.

Replaceable probes for ongoing maintenance

The pH electrode connects via BNC. The EC probe uses the large PIN connector intended for the P700 Pro 2. A worn probe can therefore be replaced separately from the housing. Always check the connector and generation before ordering a part.

Setup and calibration

Follow the manual to activate the probes and calibrate pH at two points. EC is calibrated at one of the reference points supported by the instrument. Prepare clean samples of pH 7.00 Aqua Master Tools — calibration solution — 100 ml, of pH 4.01 Aqua Master Tools — calibration solution — 100 ml and EC 1413 Aqua Master Tools — calibration solution — 100 ml and avoid contaminating bottles with a used electrode.

Care between uses

The manufacturer recommends KCl Aqua Master Tools — storage solution — 100 ml in the pH electrode's cap during storage. Keep the IP65 housing out of the liquid; the electrodes are rated IP67. Rinse and maintain the probes as instructed in the manual.

Which instrument should you choose?

The P700 Pro 2 is designed for continuous readings on its display. A combination pen is more mobile for spot checks between several reservoirs. For smartphone alerts, see the connected models in the range.

Equipment and manual

The monitor uses external pH and EC probes. Its rechargeable battery is built in. The official manual includes instructions in French for connection, measurement and calibration.

Also explore our pH and EC meters and accessories to complete your setup.

For regular checks, choose calibration solutions suited to your instrument.

Related products

pH electrode with BNC connector for P700 Pro 2 — Aqua Master Tools, EC electrode with large PIN connector for P700 Pro 2 — Aqua Master Tools, pH 7.00 Aqua Master Tools — calibration solution — 100 ml, pH 4.01 Aqua Master Tools — calibration solution — 100 ml.