ProActiv Ø125 mm - 250 m3/h - Carbon filter - Garden HighPro

Your questions about this product

• I see that the PROACTIV carbon filter is perfect for effectively filtering smells, but is it also easy to clean and maintain? How often should it be replaced?
  Indeed, the ProActiv carbon filter from Garden HighPro is effective in eliminating bad odors thanks to its activated carbon from coconut shells. As for maintenance, it is quite simple. The prefilters require periodic maintenance, you just have to remove them and clean them with water every 3 to 6 months approximately. You can also shake the 'sock' or prefilter from time to time for regular maintenance. When it comes to activated carbon itself, it does not require any particular cleaning. In terms of lifespan, it can vary depending on use and air quality to treat. However, under normal conditions, you can plan for a filter element replacement every 12 to 18 months. Just know that in terms of installation, it is a simple process. You just have to attach the filter with clamps and connect it to the air extraction of your growing space. Hoping to have brought you the necessary information for a smooth indoor cultivation. Good cultivation to you!
• Hi, I was looking at this ProActiv charcoal filter from Garden HighPro and I was wondering, do I need to buy a fan or something like that to make it work, or does it work on its own?
  Hello, For the ProActiv 125 mm x 250 m3 / h carbon filter from Garden HighPro to work efficiently, it needs to be paired with a ventilation system, specifically an extraction fan. Alone, the filter cannot circulate air and therefore will not be able to neutralize odors. Just make sure to opt for a suitable fan, which matches the filter's 125mm diameter and can provide it with the recommend air flow. That's assurance of a system efficient and optimized for your indoor crops. If needed, do not hesitate to consult our catalog of extraction fans. You are sure to find the model that suits your installation. Happy cultivation!
• What is the actual impact of the 730 g/m² density of the virgin coconut activated charcoal on the filtration capacity per m³ compared to standard filters around 600 g/m² in a typical 3x3m grow room with 250m³/h?
  The 730 g/m² density of virgin coconut activated charcoal in the ProActiv filter increases the contact area for odor neutralization compared to a standard density of around 600 g/m². This means a more efficient filtration capacity for the same volume of air filtered (250 m³/h), especially in a 3x3 m grow room where air quality is crucial.Furthermore, this higher density activated charcoal offers better absorption even in moderate humidity conditions, which is common in indoor cultivation. The ProActiv filter is also designed to be lighter and easier to install, a real plus for setup and maintenance.In summary, this higher density improves the lifespan and efficiency of the filter, with a positive impact on the filtration capacity per m³ of air, although this may result in a slightly higher cost compared to standard filters.
• Can this ProActiv 125mm 250 m3/h filter be used with a variable speed extractor to adjust the flow according to growth without losing efficiency in odor filtration?
  The filter ProActiv Ø125 mm - 250 m³/h can be used with a variable speed extractor without losing its efficiency, provided that the air flow is well controlled and does not exceed its nominal capacity. Adjusting the flow according to your plants' growth is even advantageous, as reducing the air flow can improve odor filtration. Just make sure that the extraction system is accurate enough to properly adjust the flow and maintain an optimal environment.
• Is it compatible with a mini extractor 125mm for a micro box 60x60 cm?

  The ProActiv filter Ø125 mm - 250 m³/h is perfectly compatible with a mini extractor 125 mm, ideal for a micro box 60x60 cm. This filter exactly matches the standard diameter of the extractor and supports a flow rate of up to 250 m³/h, ensuring effective filtration without loss of performance, as long as the flow rate is not exceeded.

• Is the virgin coconut shell charcoal used in this filter certified to comply with recognized food safety or environmental quality standards, and do you guarantee stable performance throughout the indicated lifespan?

  The ProActiv Ø125 mm - 250 m³/h filter uses virgin coconut shell activated carbon known for its effectiveness in odor filtration. However, no official certification regarding specific food safety or environmental standards is publicly mentioned for this charcoal.

  Regarding performance, this filter benefits from good user feedback, demonstrating consistent effectiveness, but no formal guarantee or quantified data is provided by the manufacturer regarding the stability of this performance over the entire indicated lifespan.

  For optimal performance, it is recommended to replace the filter according to usual maintenance recommendations.

• What is the performance maintenance of the PROACTIV 125 filter in terms of flow rate m3/h after 3 months of continuous use in a humid environment?

  The ProActiv Ø125 mm - 250 m³/h filter from Garden HighPro is designed with high-quality activated carbon and sealed multi-layer wool mats that ensure excellent air flow initially. However, in a humid environment (>65% humidity), the efficiency of the mats may decrease more quickly, which can lead to a slight drop in air flow over time.

  After 3 months of continuous use in a humid environment, there is no precise data quantifying this drop in flow. In practice, the nominal flow rate of 250 m³/h is likely to be reduced, but without any official measured figure. It is advisable to monitor humidity to best preserve the filter's performance.

• Considering the flow of 250 m³/h, is the filter sufficient to be used in parallel on two crops with a shared extractor, or is it better to dedicate one filter per crop to maintain optimal efficiency?
  The ProActiv charcoal filter Ø125 mm - 250 m³/h is designed for a maximum flow rate of 250 m³/h. Using a single filter in parallel on two crops means sharing this capacity between them, which can quickly exceed the limit and reduce the overall efficiency of filtration.

  To ensure optimal filtration suitable for each growing space, it is preferable to dedicate one filter per crop. This avoids efficiency losses and ensures better air quality, especially if ventilation needs are similar or high.

  If, however, the extractor used has a variable speed, sharing may be considered provided that the airflow is properly adjusted so as not to exceed 250 m³/h. Nevertheless, the most reliable solution remains to have a dedicated filter for each crop.

• Does the ProActiv 125mm 250m³/h filter support continuous use without significant loss of performance, and what is its average lifespan before replacement in a heavily odor-laden environment?

  The ProActiv Ø125 mm - 250 m³/h filter is designed for continuous use due to its multi-layer structure and virgin coconut activated carbon, allowing for effective odor neutralization without significant loss of performance over a normal usage period.

  Regarding its lifespan in a heavily odor-laden environment, it varies depending on the intensity and frequency of use. It is recommended to regularly monitor the quality of the filtered air: as soon as you detect a reduction in efficiency (return of odors), you should consider replacing the filter to ensure optimal filtration.

  This vigilance helps maintain consistent performance against high odor loads.

• What is the ideal protocol for changing or cleaning this charcoal filter to maintain optimal filtration during parallel cultivation?

  To ensure optimal filtration with your ProActiv 125 mm x 250 m³/h charcoal filter during parallel cultivations, here is the ideal protocol:

  1. Regular inspection: Check the airflow and odor removal every month. Make sure to keep humidity below 65% to maintain the filter’s effectiveness.

  2. Pre-filter maintenance: Clean it with clear water without chemicals every 3 to 6 months depending on usage. Let it dry thoroughly before replacing it.

  3. Replace the activated carbon filter: Replace it every 12 to 18 months, or sooner if you notice a drop in performance, especially in cases of high humidity or dusty environments. The ProActiv system makes this operation easier.

  4. Filter rotation: For intensive parallel cultivation, having a spare filter allows avoiding interruptions and ensuring constant filtration.

  This protocol extends the life of your filter and guarantees optimal air quality throughout your cultivations.

• Is integration possible with a home automation system for controlling and monitoring the ProActiv 125mm carbon filter?

  The ProActiv 125 mm x 250 m³/h carbon filter does not natively integrate a feature for being controlled or monitored via a home automation system. It is designed for a simple installation with a standard 125 mm extractor fan and can operate with a variable speed extractor, but without direct home automation communication.

  For automated control or monitoring, it would be necessary to add external equipment, such as an air quality sensor or a controller compatible with your home automation system, applied to the extractor associated with the filter.

• What criteria should be prioritized to associate this PROACTIV carbon filter Ø125 mm - 250 m3/h with a ventilation system to ensure optimal filtration while avoiding airflow losses in a multi-variety indoor cultivation?
  To associate the ProActiv carbon filter Ø125 mm - 250 m³/h with a ventilation system in a multi-variety indoor cultivation, it is essential to adhere to several key criteria. First, ensure that the diameter of the extractor and duct is strictly 125 mm to avoid any air flow leakage or restriction.

  Next, choose an extractor with an adjustable air flow rate not exceeding 250 m³/h, the nominal capacity of the filter, to prevent saturation of the activated carbon which would reduce its effectiveness. Maintaining a perfectly suited flow rate optimizes filtration while limiting pressure losses.

  The filter uses high-density activated carbon, which is very efficient even in humid environments, but care should be taken to keep the relative humidity of the room below 65%. Also, regularly check and clean the fabric pre-filter to maintain a constant flow rate and protect the carbon.

  Finally, careful installation and regular maintenance ensure the longevity and performance of the system, which is essential in a multi-variety environment where conditions can change rapidly.

• What is the noise level of the ProActiv charcoal filter during its operation to determine if it disturbs the tranquility in an indoor space?

  The ProActiv Charcoal Filter 125 mm x 250 m³/h is designed for indoor use where comfort is important. Although no precise data on its noise level is available, these filters are generally designed to limit noise disturbances. Thanks to their lightweight and optimized design, they disturb the tranquility of your growing space very little.

  If silence is a top priority, you may also consider pairing this filter with a suitable silent extractor fan, available in our shop.

• Does this PROACTIV 125mm 250m3h charcoal filter maintain its effectiveness throughout its entire lifespan, or does performance drop quickly after a few months of intensive use?

  The ProActiv 125 mm x 250 m³/h charcoal filter features an advanced design with high-quality coconut activated carbon and a multilayer wool mat, allowing it to maintain effective filtration and excellent odor neutralization throughout its lifespan.

  The performance does not drop quickly after a few months of intensive use. Thanks to the quality of the materials and the optimization of air circulation, this filter retains its effectiveness sustainably, without significant loss, as long as the recommended usage duration is adhered to.

• What is the difference in noise level between this filter and a traditional model with a traditional ballast?

  The charcoal filter ProActiv Ø125 mm - 250 m³/h stands out for its lightness and filtration efficiency thanks to its multi-layer structure and coconut activated carbon. However, there is no precise information indicating that this filter generates a different noise level than a traditional model with a traditional ballast.

  In reality, the perceived noise mainly comes from the extractor (fan) and not from the filter itself. Thus, regardless of your setup, the ProActiv filter does not significantly alter the overall noise level. For a quieter cultivation, it is therefore better to focus on the choice of the associated extractor.

• How does the ProActiv 125mm filter manage the ideal pressure drop to maintain a constant flow of 250 m³/h in a circuit with moderate to high extraction?

  The ProActiv Ø125 mm - 250 m³/h filter from Garden HighPro is designed to provide efficient filtration with high-quality activated carbon, ensuring low resistance to air. However, this specific model does not have any particular internal mechanisms to automatically compensate for pressure loss.

  To maintain a constant flow rate of 250 m³/h in a moderate to high extraction circuit, it is essential to pair this filter with an appropriate extractor, ideally calibrated for this flow rate. A careful installation, with properly sized ducts and no obstructions, will help limit excessive pressure loss. Also, be careful not to exceed the recommended flow rate to preserve the filter's performance and lifespan.

  Finally, regular maintenance to check the state of the activated carbon is crucial: a saturated filter increases pressure loss and decreases flow rate. Thus, the constancy of the flow is more about a good balance between the filter, the extractor, and the entire system than about autonomous management by the filter itself.

• Is ProActif-125-250 compatible with standard 125mm extractors without significant loss of flow?

  The ProActiv 125 mm x 250 m³/h charcoal filter is perfectly compatible with standard 125 mm extractors. As long as the flow rate of your extractor does not exceed 250 m³/h and the installation is done correctly (airtight connections, suitable duct), you will not notice any significant loss of flow. This filter ensures optimal operation without air flow restriction, ideal for maintaining the performance of your ventilation system.

• What is the yield loss rate of the ProActiv 125 mm filter at 250 m³/h at the beginning and end of its life cycle, and how does it affect airflow management in outdoor cultivation under greenhouses?

  The ProActiv Ø125 mm - 250 m³/h charcoal filter offers from the start a low pressure drop, less than 75% compared to conventional filters, thanks to its high-quality coconut activated carbon and multilayer protection. This allows the fan to maintain optimal flow and excellent air renewal at the beginning of its life.

  Over time, the gradual saturation of the activated carbon and the accumulation of particles lead to an increase in pressure drop, which can reduce the actual airflow if the fan does not compensate for this additional resistance. In greenhouse cultivation, this can limit the effectiveness of air renewal and odor management, impacting the climate and plant health.

  It is therefore essential to regularly monitor the condition of the filter and to replace it when a noticeable drop in performance is observed, to ensure a constant airflow, good ventilation, and to avoid excessive energy consumption linked to fan overload.

• What is the electrical consumption associated with the continuous use of the PROACTIV 250m3h filter in indoor conditions and what is the actual filtration efficiency under typical usage conditions?

  The ProActiv Ø125 mm - 250 m³/h charcoal filter is a passive device, it does not consume electricity by itself. The electrical consumption comes solely from the fan that operates it. At a flow rate of 250 m³/h, this fan typically consumes between 15 and 30 W during continuous operation, which amounts to approximately 130 to 260 kWh per year depending on the exact power.

  Regarding the efficiency, this filter provides excellent filtration of odors and volatile organic compounds, with a purification rate often exceeding 90 % under indoor usage conditions. The multilayer technology and high-quality activated carbon ensure low pressure loss, facilitating air passage (10-40 Pa), which optimizes the overall efficiency of the system.

• Is the 125mm ProActiv filter sufficient for a micro-culture of 60x60 with extraction of 250m3h?

  The ProActiv 125 mm x 250 m³/h carbon filter perfectly matches an extraction of 250 m³/h, which is ideal for a micro-culture of 60x60 cm. Its capacity is sufficient to manage the air volume of your space.

  Thanks to its quality coconut activated carbon, it will effectively neutralize odors, knowing that a micro-culture generally generates less odor than a larger area. Just remember to regularly check the filter's performance, as its effectiveness may decrease over time and usage.

• possible integration with home automation system for real-time monitoring of filtration usage

  The ProActiv Ø125 mm - 250 m³/h charcoal filter from Garden HighPro does not feature native integration or sensors for real-time monitoring via a home automation system. Its operation relies on simple mechanical filtration, without automatic feedback on saturation or performance.

  However, it is possible to add external sensors (flow, differential pressure, air quality) to the overall system to indirectly monitor the system's status, but this requires a specific configuration beyond the standard features of the filter.

  Thus, monitoring and maintenance of the filter remain manual, with a recommended replacement every 12 to 18 months depending on usage.

• What replacement frequency do you recommend to maintain optimal filtration without loss of flow?

  For your activated carbon filter ProActiv Ø125 mm - 250 m³/h - Carbon filter - Garden HighPro, we recommend a replacement every 12 to 18 months to maintain optimal filtration without significant loss of flow. This frequency may be shorter if you operate in a very humid or dusty environment, conditions that accelerate the saturation of activated carbon.

  To maintain a stable flow of 250 m³/h, also ensure to use an extractor suitable for this flow rate and to carry out a sealed and unobstructed installation. Regular maintenance of the fabric pre-filter, when present, protects the activated carbon and contributes to a constant airflow.

  Finally, monitor the filtration quality: an increase in odors or a decrease in performance indicates that it is time to consider an early replacement to ensure lasting efficiency.

• Does the ProActiv 125mm 250 m3/h filter support continuous use for several months without significant efficiency loss, and should a pre-filter be considered to extend its lifespan?
  The ProActiv Ø125 mm - 250 m³/h charcoal filter is perfectly designed for continuous use over several months without significant efficiency loss, provided that the recommended flow rate is respected and a good installation is ensured (duct diameter, tightness, humidity below 65%). The high-quality activated charcoal guarantees good durability.

  It already incorporates a fleece pre-filter that effectively protects the charcoal from dust. However, in a very dusty or particle-laden environment, it is advisable to consider an additional pre-filter to further extend the filter's lifespan and maintain its optimal efficiency.

  Regular maintenance and monitoring of the filter's condition remain essential to ensure its performance over time.

• Does the filtration capacity of 250 m3/h of the ProActiv Ø125 mm filter suit a 1m2 growing chamber with a regularly cleaned extractor to ensure optimal odor elimination throughout the flowering period?

  The ProActiv Ø125 mm - 250 m³/h filter is perfectly suitable for a 1 m² growing chamber. Its flow rate of 250 m³/h allows for quick air renewal of a volume of about 2 to 3 m³, thus ensuring effective odor elimination during the entire flowering period.

  For optimal efficiency, it is essential to use a high-performance extractor that is regularly cleaned and to ensure a careful installation (appropriate ducting, sealing of connections) to avoid pressure drops. The high-quality activated carbon contained in this filter ensures long-lasting odor neutralization.

  With regular maintenance, this configuration will provide you with reliable odor control throughout the cultivation.

• Does the ProActiv 125mm filter support a constant flow rate of 250m³/h without loss of efficiency in a small optimized space?

  The ProActiv Charcoal Filter Ø125 mm - 250 m³/h is perfectly capable of supporting a constant flow rate of 250 m³/h without significant loss of efficiency, thanks to its high-quality activated carbon which offers low air resistance.

  To ensure this performance in a small optimized space, it is essential to combine this filter with an extractor rated at 250 m³/h and the same diameter (125 mm), to install a well-dimensioned, airtight, and unobstructed ventilation circuit, and to ensure regular maintenance of the filter to avoid saturation of the activated carbon.

  Provided these conditions are met, this filter will offer you effective and constant filtration, ideal for managing air in a limited space.

• Is the ProActiv 125mm 250m3h charcoal filter compatible with a standard 125mm extractor, or is a specific adapter required for quick installation?
  The charcoal filter ProActiv Ø125 mm - 250 m³/h is perfectly compatible with a standard 125 mm extractor. Therefore, there is no need for a specific adapter for quick installation, as long as the extractor's flow rate does not exceed 250 m³/h and the installation is done properly with airtight connections and an appropriate duct. This configuration ensures effective filtration while maintaining good air flow.