Complete pack 80×80 Comfort – CannaLED Rhino 260 PRO V3

Secret Jardin Hydro Shoot HS80 V2, 80 × 80 × 178 cm: 0.64 m² nominal footprint. A growing enclosure to equip for your plants. Lighting and ventilation sold separately.

Secret Jardin Hydro Shoot HS80 V2

Your growing space.
0.64 m² of floor space.

Secret Jardin Hydro Shoot HS80 V2 · 80 × 80 × 178 cm. A growing enclosure to equip for your plants. Add lighting, extraction, air circulation, a filter if needed, pots and growing medium separately.

Mylar M210D80 × 80 × 178 cmEquipment sold separately

0.64 m²Nominal footprint

178 cmTotal assembled height

210 DReflective fabric

16 mmPole diameter

Before you choose

80 × 80 cm: leave room for access.

Measure the floor space, ceiling and access routes. Leave room for doors, ducts and connectors so you can water, move pots and tend plants.

Total height includes pots, the light and its hangers. Also allow for the light-to-plant distance specified by the lighting manufacturer.

Hanging load : 10 kg per bar · 20 kg total, distributed Distribute loads across the intended bars and include devices, cables and fixings. A hanging limit does not authorise hanging filled reservoirs.

What is included

Cover and frame, 2 hanging bars, 1 removable tray(s).

What you need to add

Add lighting, extraction, air circulation, a filter if needed, pots and growing medium separately.

Check my setup →

Useful details

Details that shape your setup

A growing enclosure to equip for your plants.

Reflective walls around the growing area

The reflective lining returns some light into the enclosure. It complements your chosen light; it does not guarantee a yield increase or a reflectance percentage for your setup.

Air sleeves ready for ducting

Sleeves provide duct connections, not powered ventilation: choose an extractor separately. Check connector outer diameters and tighten the sleeves around ducts. 2 sleeves Ø 180 mm

An accessible base for cleaning

The removable tray catches small spills and helps with cleaning. It is not a reservoir, and the tent must not be filled with water.

Getting started

Assemble, equip, then check

01

Assemble the frame and cover

Follow the instructions for this model. Check joints, open the zips needed to fit the cover and do not force the zips.

02

Position equipment with enough clearance

Follow documented load limits, mounting points and lighting clearances. Keep electrical connections away from watering areas.

03

Test airflow with equipment running

Connect suitable extraction and provide an air inlet. Check temperature and humidity at several points, then adjust air renewal and circulation.

Simple access for maintenance

Unplug equipment before maintenance. Remove debris and spills, clean surfaces as directed by the manufacturer, then let them dry. Check zips, joints and the fixings of suspended loads.

Compare the essentials

Specifications: Hydro Shoot HS80 V2

Specifications for the documented version. Area and volume are calculated from nominal dimensions; equipment and access space have not been subtracted.

Secret Jardin Hydro Shoot HS80 V2

Assembled dimensions	80 × 80 × 178 cm
Nominal footprint	0.64 m² nominal
Nominal volume	1.14 m³
Reflective fabric	Mylar M210D
Pole diameter	Ø 16 mm
Net weight	6.1 kg
Hanging load	10 kg per bar · 20 kg total, distributed
Ventilation openings	2 sleeves Ø 180 mm
Cable openings	1 × Ø 75 mm
Growing equipment	Add lighting, extraction, air circulation, a filter if needed, pots and growing medium separately.
Floor tray	1 removable tray(s)

Manufacturer sources: Manufacturer documentation · Further manufacturer document · Further documentation

Compare Secret Jardin grow tents →

Before buying

A question about your setup?

Dimensions, ventilation and hanging loads are covered in the questions on this page. To check a particular device, send us its model and dimensions.

Read the questions and answers →

A growing enclosure to equip for your plants.

Check available space, hanging loads and the equipment you need to add before ordering.

Back to buying options ↑

The Rhino Series 260 PRO is an evolution of the standard version ! It is equipped with the latest Samsung LM301H LEDs , a full spectrum 3000K, 5000K with 660nm red, infrared and UV LEDs !
It has a high-end MeanWell power supply for a consumption of 200 Watts.

The Rhino Series 260 PRO has an integrated dimmer , which will allow you to easily manage its intensity!

Rhino Series 260 PRO PPFD testing

Easily manage the light intensity of your Rhino PRO 260!

The accessories

In the package including your Rhino PRO, you will find:

• Rhino PRO 260 LED horticultural lighting
• A suspension kit with pulleys
• A MeanWell power supply with dimmer to manage lighting intensity
• A power cable with European plug
• Sold 100% Plug & Play - Ready to install

• Easy speed adjustment
• Suitable for different sizes of spaces
• Energy efficient
• Durable and reliable
• Promotes plant growth

Air renewal is crucial to ensuring an optimal environment for your plants to grow, regardless of your growing background. The Garden HIGHPRO TT MAX 125 Extractor - 2 Speeds - 220-280m3/h is the ideal tool for this essential task. In this product sheet, we will provide you with all the necessary information on this high-performance fan, while respecting the rules of SEO.

Product Description :

Technical characteristics :

• Speed 1: 220 m³/h - 23 Watt
• Speed 2: 280 m³/h - 37 Watt
• Connection diameter: 125 mm
• Voltage: 220-240V
• Frequency: 50-60 Hz

Solid construction:

The TT MAX Profan 125mm is made of quality ABS plastic, ensuring exceptional durability. It is designed for the renewal or supply of air to your planting spaces, providing an environment conducive to plant growth.

Offset Flanges for Easy Installation:

Thanks to its offset flanges, you can easily connect it to any network of 125 mm conduits and ducts. Installation requires little effort, allowing you to focus more on your plants.

Two Speeds for Maximum Versatility:

The TT MAX 125 Extractor is equipped with a two-speed motor, offering increased flexibility. The adjustment button is on the side of the electrical connection box, allowing you to switch between speeds with a simple click. You therefore have total control over the air circulation in your growing space.

Opinion from an Expert Grower:

"With the Garden HIGHPRO TT MAX Extractor, I was able to optimize the environment of my greenhouse. Its two speeds allowed me to adjust the ventilation according to the needs of my plants, thus promoting their growth and their health. Its sturdy construction gave me confidence in its durability, and its easy installation was a real asset. It's a must-have choice for any serious grower."

In summary, the TT MAX 125 Extractor - 2 Speeds - 220-280m3/h from Garden HIGHPRO is the perfect tool to guarantee optimal air circulation in your planting space. Its solid construction, two speeds, and easy installation make it a wise choice for growers concerned about the health of their plants. Don't let air quality get in the way of your growing success. Opt for the TT MAX 125 and create an ideal environment for plant growth.

Questions/Answers area:

Q: What is the practical difference between the two speeds of the TT MAX 125 Extractor?

A: Speed 1 (220 m³/h) is ideal for efficient air exchange in smaller spaces, while speed 2 (280 m³/h) is recommended for larger spaces requiring air circulation more important.

Q: Can this extractor be used in a large greenhouse?

A: Yes, the TT MAX 125 Extractor is suitable for a variety of greenhouse sizes and planting spaces, ensuring adequate ventilation.

Q: Is this extractor energy efficient?

A: Yes, with a consumption of only 23 watts in speed 1 and 37 watts in speed 2, it is energy efficient while maintaining optimal performance.

Don't hesitate to ask any other questions if you have any!

• Effectively neutralizes odors
• Easy to install
• Long-term use
• Ideal for small spaces
• Secure and reliable

Introduction

The PROACTIV 250m3/h carbon filter from Garden HIGHPRO, with its diameter of 125mm, represents the ideal solution for effectively filtering unwanted odors in indoor spaces. This product combines lightness and exceptional performance thanks to its multi-layer technology and the use of virgin coconut activated carbon.

Product Features

• Brand : GARDEN HIGH PRO
• Product Type : Carbon filter
• Use : Indoor odor filtration
• Flow rate : From 1 to 300 m3/h
• Dimensions : Height: 19 cm, Diameter: 23 cm
• Packaging : Individually
• Flange Diameter : 125 mm

Advantages of the PROACTIV Filter

• Virgin Coconut Charcoal : Food grade charcoal for effective filtration.
• Fine Charcoal Particles : Increases the surface area for neutralizing odors.
• High Density : 730 gr/m2 for optimal performance.
• Purified Air : Several layers of wool hermetically coupled for flawless filtration.
• Innovative Design : Integrated hanging rings for easy installation.

Opinion from an Expert Grower

"I use the PROACTIV filter from Garden HIGHPRO in my greenhouse. Its effectiveness in eliminating odors while maintaining clean air is remarkable. Lightweight and easy to install, it is the best filter I have used so far ."

Questions/Answers for Users

• Q: Is the filter easy to install?

  • A: Absolutely, thanks to its integrated hanging rings.

• Q: How long does the filter last?

  • A: It varies depending on use, but generally several months.

• Q: Can this filter be used for all types of indoor spaces?

  • A: Yes, it is ideal for a wide range of interior spaces.

Conclusion

The PROACTIV 250m3/h carbon filter from Garden HIGHPRO is a top choice for anyone looking for an effective and easy-to-use solution for indoor odor filtration. Its advanced design and quality materials guarantee exceptional performance.

This 3m and 125mm diameter sheath is robust, it is lined to prevent the slightest leak of odor or heat.

Adjustable clamp, ideal for air extractor from 25 to 175 mm.

The Clivex 23 cm, 20 W oscillating clip-on fan circulates air inside a grow tent. Two speeds and a fixed mode help adjust the airflow while keeping the floor clear. Check pole compatibility and clearance for the head. It complements extraction; it does not replace an extractor fan.

Clivex · Clip-on fan

Keep the air moving.
Keep the floor clear.

The Clivex 23 cm, 20 W oscillating clip-on fan attaches to a compatible pole in your grow tent to circulate air around the foliage. Its two speeds and fixed or oscillating modes let you adjust the airflow to suit your setup.

Clip-on mount2 speedsFixed or oscillating

23 cmStated diameter

20 WNominal power

2Fan speeds

Clip-onFor a compatible pole

What it means for your setup

Air circulation that suits your space

Air circulation helps reduce areas of stagnant air around the foliage. Here is what this model’s settings and mounting system offer for your setup.

Airflow that changes direction.

Automatic oscillation changes the direction of the airflow. You can also select a fixed position to direct the airflow towards a specific area.

Two speeds to find the right setting.

Start at low speed. Then adjust the setting and distance until the leaves move gently.

More room for your pots.

The clip secures the fan to a suitable support, with no stand taking up floor space. Position the airflow wherever your setup allows.

Before you choose

The right choice for your setup?

This fan is designed for air circulation inside a grow tent: adding air movement around the foliage or improving circulation in a poorly ventilated area, using a pole as a support.

Circulation and extraction work together. This fan moves the air already present; it does not replace the air exchange your growing space needs.

Before choosing, check these two points:

The support: its shape and diameter must allow the clip to hold the fan securely.

Clearance: leave enough room for the head to oscillate without touching the tent wall, leaves or cables. The stated 23 cm diameter does not represent the fan’s overall dimensions.

Check compatibility →

Getting started

Install. Adjust. Observe.

01

Attach to a stable support.

With the fan unplugged, fit the clip to a compatible pole. Check that the fan is secure and that the head can move freely.

02

Start at low speed.

Position the fan to circulate air around the foliage. Switch on oscillation if you want the airflow to change direction.

03

Adjust by observing your plants.

If the leaves are constantly being shaken vigorously, move the fan further away or change its direction. Review its position as the foliage develops.

Simple maintenance

Unplug the fan before removing dust from the grille and accessible parts. Check the mounting regularly. Follow the manufacturer’s instructions for any disassembly.

Compare the essentials

Technical details for comparison

The specifications for this model, all in one place.

Clivex 23 cm · 20 W — oscillating clip-on fan

Diameter	23 cm
Power	20 W
Speeds	2 speeds
Mode	Automatic oscillation or fixed position
Mount	Clip for a compatible pole
Supply	220–240 V · 50/60 Hz

Specifications: Clivex manufacturer’s product page

Compare fans →

Useful answers

Your questions before choosing

Will the clip fit my tent poles?

Clivex specifies mounting on grow tent poles, but does not state the compatible diameter range in its product information. Tell us your pole’s diameter and mention the Clivex 23 cm model so compatibility can be checked before you choose.

Does the Clivex 23 cm replace an extractor fan?

No. The Clivex 23 cm fan circulates the air already around your plants. Extraction renews the air in the growing space: the two types of equipment have complementary roles.

Can oscillation be switched off?

Yes. The manufacturer lists both an oscillating mode and a fixed position. The two speeds then let you adjust the airflow.

Is it quiet?

Clivex does not provide a measured noise level in the product information consulted. We therefore cannot guarantee that its sound level will be comfortable in a living area.

Adjustable airflow. More room on the floor.

Check your support and the available clearance before choosing.

Back to buying options ↑

Take advantage of this connection to take control of the device of your choice with your mobile phone. Compatible with extractor, lamps, pumps...

• Control the device of your choice from your smartphone
• View live consumption or history
• Set a daily on/off schedule
• Minute timing
• Remote management WIFI connection

Optimize your indoor growing space with our new connected socket!

This device allows you to control and automate your cultivation remotely, while controlling your electricity consumption.

Easy to use, simply plug your devices into the socket and control them from your smartphone or tablet. Compatible with LED horticultural lighting up to 2000W, you can also use it for an air extractor, a water pump or any other electrical device.

Here are some examples of use of our connected socket in indoor cultivation:

• Program the switching on and off of your horticultural lighting according to your growth cycle
• Remotely monitor and control the consumption of your devices
• Automate the watering of your plants with a connected water pump

Technical characteristics :

• Wifi 2.4Ghz 802.11b/n/g
• Input voltage: AC100-240V 50/60Hz
• Maximum current: 16A
• Operating temperature: -20°C to 50°C
• Maximum humidity: 80%

Here are some frequently asked questions about our connected socket:

• Is it compatible with all electrical devices? Yes, it is compatible with all devices under 2000W. However, it does not allow you to vary the intensity.

• Is it easy to install? Yes, simply plug your device into the socket and follow the setup instructions via the dedicated app.

• Is it secure? Yes, our connected socket is equipped with all the necessary security measures to ensure use with confidence.

Don't hesitate any longer and opt for our connected socket for optimized and easy to manage indoor cultivation!

This is what you can hang anything without problem, within the limit of 68Kg....

Can this kit hang any LED horticultural lighting from our catalog?

The maximum length is 150cm.

The suspension kit allows you to attach any type of lighting or ventilation device if they do not exceed 5kg.

You can adjust the height using a pulley system.

Optimize the space of your indoor cultivation installation with the versatile suspension kit, designed to support up to 5kg of lighting or ventilation devices. Ideal for adjusting the height of your equipment according to the needs of your plants, this kit offers a robust and easy to install solution.

The suspension kit is equipped with a pulley system that allows precise height adjustment, ensuring an optimal growing environment. Whether you use grow lights, fans or other essential equipment for your crop, this kit guarantees a secure and stable installation.

Main Features :

• Versatility of Use : Suitable for various types of lighting and ventilation devices up to 5kg.
• Ease of Installation : Installs quickly without the need for complex tools.
• Precise Height Adjustment : Pulley system allowing easy adjustment according to the needs of the plants.
• Robustness and Safety : Solid construction ensuring secure fixation.
• Adaptability : Perfect for indoor growing setups of all sizes.

Opinion from an Expert Grower

"The suspension kit is essential in my greenhouse to keep my horticultural lamps at the right height. Its ease of installation and its capacity to support up to 5kg are major assets to ensure optimal growth of my plants." — Opinion from an expert grower

Questions answers

Q: Can this kit be used for LED lamps?
A: Yes, as long as the weight of the lamp does not exceed 5kg.

Q: Is the pulley system easy to adjust?
A: Yes, it allows precise height adjustment with little effort.

Q: Is this kit compatible with all types of ceilings?
A: Yes, it can be installed on most solid surfaces.

Q: What is the maximum length of the suspension cable?
A: The standard length is sufficient for a typical indoor growing setup.

Q: Does the hanging kit include installation instructions?
A: Yes, detailed instructions are provided for easy and secure installation.

5-socket power strip with switch and one meter cable, ideal for indoor growing.

Maximum power: 3500W

Usage: Interior

Textile pot measuring 23 x 23 x 25cm that can hold 11L of potting soil.

These stainless steel scissors in Medium size are perfect for manicuring plants! Thanks to its clean and precise cut , it will allow you to prune your plants without any worries.

• Easy to use
• Sharp and precise blades
• Resin resistant

Optimize the health and growth of your plants with the Medium INOX scissors, designed especially for plant manicure. Their sharp blade ensures a clean and precise cut, ideal for pruning your plants effortlessly.

Product Description

Medium plant manicure scissors are an essential tool for any grower who cares about the health of their plants. Made from high quality stainless steel, they provide exceptional durability and resin resistance, ensuring reliable performance with every use.

Main Features :

• Precise Cutting : Sharp blades for a clean cut without damaging plant tissue.
• Ease of Use : Ergonomic and easy to use, they are suitable for all experience levels.
• Resin Resistance : Easy to clean after each use, ensuring prolonged longevity.
• Versatility : Suitable for pruning various types of plants, including herbs, flowers and vegetables.
• Reliability and Durability : Constructed of robust stainless steel for intensive use without corrosion.

Opinion from an Expert Grower

"The Medium INOX scissors have greatly improved my plant care routine. Their ability to provide precise cutting and their resistance to resin make them a perfect choice for all types of plants I grow." — Opinion from an expert grower

Questions answers

Q: Can these scissors be used for pruning plant roots? A: No, these scissors are mainly intended for manicuring the aerial parts of plants.

Q: How to maintain scissors to ensure their durability? A: It is recommended to clean the blades after each use and keep them away from moisture.

Q: Are scissors suitable for small houseplants? A: Yes, their Medium size makes them perfect for indoor plants as well as outdoor plants.

Q: Are the scissors ergonomic for prolonged use? A: Yes, they are designed to provide optimal comfort during long trimming sessions.

Q: Are the scissors rust resistant? A: Yes, their stainless steel construction makes them resistant to corrosion and rust.

The Medium Stainless Steel Plant Manicure Scissors are the essential accessory for any serious gardener looking to keep their plants healthy and well cared for. With their robust design and cutting precision, they guarantee professional results for every plant care session.

The Optithermo digital hydro thermometer is ideal for controlling the climate in your growing space (temperature and hygrometry). Batteries included.

• Allows you to lower the pH while preserving the nutrient capacity of the substrate.
• Aqueous solution based on citric acid naturally present in citrus fruits.
• Quickly adjusts pH for optimal nutrient absorption.
• Suitable for all growing and flowering substrates and irrigation methods.
• Grow 100% organically, from seed to harvest!

Presentation:

Welcome to the world of organic farming! Discover Bio·Down, the pH regulator specially designed for passionate indoor growers. You'll love how it optimizes your plants' nutrition while maintaining a perfectly balanced pH.

Why use it:

To allow your plants to take full advantage of all the nutrients, it is essential to correct the pH naturally. Bio·Down, formulated with citric acid present in lemons, guarantees maximum absorption of nutrients. You will thus obtain healthy, vigorous and flourishing indoor crops.

How to use it:

Nothing's easier ! Mix your Biobizz nutrients as usual and measure the pH of the preparation. Add 0.1 ml of Bio·Down for each 0.5 point drop in pH desired. Stir for 10 seconds and measure the pH again. Repeat until you reach the ideal, between 6.2 and 6.5. Your plants will thank you for this delicious concoction!

Technical characteristics:

• 100% organic formula based on natural citric acid.
• Compatible with any type of substrate and irrigation system.
• Does not affect the beneficial microlife of the soil thanks to the absence of strong acids.
• Perfectly suited to the growing and flowering period.
• Available in 250 ml, 500 ml and 1 liter bottles.

Questions answers:

1. Can Bio·Down be used both in growth and flowering? Yes quite ! Bio·Down adapts perfectly to both phases, guaranteeing optimal nutrition from start to harvest.

2. Is Bio·Down compatible with all substrates? Absolutely ! Whether you use soil, coco or hydroponics, Bio·Down integrates harmoniously for stunning results.

3. How long should you mix after adding Bio·Down? 10 seconds are enough to mix the magic potion and adjust the pH with ease.

4. Can Bio·Down damage beneficial soil microorganisms? No way ! Its gentle formula without strong acids respects microlife and preserves the ecosystem of the substrate.

5. Once the ideal pH value is reached, can the mixture be stored? Yes of course ! You can store it without worry and administer it to plants according to their nutritional needs.

With Bio·Down, control pH organically and reap the joy of thriving indoor crops!

This manual pH test from the GHE brand is intended for indoor growers who want to obtain value without additional cost. You just need to place a few drops of this product to obtain a color corresponding to a pH value.

This product is easy to use and very inexpensive. It can give you a pH value between 4.0 and 8.5

Manual pH tester for indoor growing - GHE - For 200 soil/hydroponics tests

Discover the GHE manual pH tester, the essential tool for indoor growers seeking uncompromising precision. This device makes it easy and inexpensive to determine the pH level of your nutrient solution or soil.

Features :

• Unrivaled precision : Get reliable results to optimize the growth of your plants.
• Easy to Use : A few drops are enough to get a clear and accurate pH reading.
• Versatile : Suitable for both soil and hydroponics.
• Economical : Reduces costs while maintaining rigorous pH monitoring.
• Robust and Durable : Designed for prolonged, worry-free use.

Review from an expert grower: "This GHE pH tester is an indispensable tool in my greenhouse. It helps me easily adjust the pH of my nutrient solutions, which is crucial to ensure the health and productivity of my plants ."

Frequently asked questions from growers:

1. How often should I test the pH of my water or nutrient solution? It is recommended to test pH at least once a day, especially during active plant growth phases.

2. How do I maintain my pH tester to extend its lifespan? Rinse the probe gently after each use and store it in a dry, clean place. Avoid leaving the pH tester submerged in water between uses.

3. What is the difference between pH for growing in soil and hydroponics? Although the measurement process is similar, nutrient solutions in hydroponics may require more frequent pH adjustments due to how quickly nutrients are absorbed by plants.

Discover the 10mL syringe which will allow you to perfectly dose nutrient solutions!

Optimize your indoor plant growth with a certified 100% organic fertilizer. Its balanced formula effectively nourishes for robust and healthy vegetation.

• Stimulates strong root and foliage development
• Improves soil fertility by activating bacterial flora
• Strengthens plants' immune systems against stress and diseases
• Compatible with all types of soils and solid substrates
• Available in multiple sizes for all cultivation scales

• Stimulates lush flowering
• Promotes abundant harvests
• 100% organic and natural
• Improves flower and fruit quality
• Suitable for all types of cultivators

The Biobizz Light Mix 90 L: the economical choice for a complete cycle. This light substrate is ideal for starting and the first weeks of growth.

• Slightly fertilized organic substrate
• Perfect for seedlings, cuttings and young shoots
• Balanced peat/perlite composition
• Allows precise control of nutrition
• Reduces packaging needs