In an open tray, the valve must remain correctly positioned with enough space to operate freely. This AutoPot cover protects it and helps hold it in place. The integrated spirit level helps check the assembly is horizontal, both during initial installation and after moving your growing setup.
Compatible with original AQUAvalve and AQUAvalve5Spirit level integrated into the coverProtection and support in an open tray
How it works
The cover sits over the valve without operating its mechanism. It does not replace the AQUAvalve or control water flow itself: the valve underneath still regulates the supply. The spirit level provides a visual reference for adjusting the support; it does not measure the amount of water in the reservoir.
Technical overview
Compatible with original AQUAvalve and AQUAvalve5
Spirit level integrated into the cover
Protection and support in an open tray
One cover, without a valve
Included items
1 AutoPot cover with integrated spirit level
Compatibility and accessory selection
The manufacturer specifies this accessory for a valve in a flat-bottomed garden tray, with pots of at least 5 L. Check there is enough room and that the valve can move freely. This cover does not automatically replace the shaped covers specific to Easy2Grow, 1Pot or XL trays.
Installation
First place the tray on a stable support. Position and connect the valve according to its instructions, then place the cover over it. Use the bubble to check the level and adjust the support where necessary. Keep the upper openings clear. Restore the water supply and make sure nothing obstructs the mechanism.
Maintenance
Lift the cover periodically to inspect the valve and remove debris around it. Clean the cover and keep the level visible. After handling, replace it carefully, then check the assembly is level and operating correctly. This accessory helps protect the valve but does not remove the need to maintain the network.
Practical questions
Is a valve included?
No. This item is the cover with its integrated level. Order an AQUAvalve or AQUAvalve5 separately.
Does the level show how full the reservoir is?
No. It is a spirit level for checking that the assembly is horizontal, not a water-volume indicator.
AutoPot cover with spirit level for AQUAvalve and AQUAvalve5
AutoPot cover with spirit level for AQUAvalve and AQUAvalve5Expected arrival on 30/10/2026Order→Reservation→DispatchPlace your order and your product will be reserved and dispatched automatically from the incoming shipment.5,50 €Unavailable
