02 — Fiche technique
Caractéristiques détaillées
| Thermal management | 95% |
| Surface de culture (m²) | 125 |
| Compatibilité | Tentes de culture, grow boxes, lampes HPS, LED, CFL |
| Durabilité | Élevée |
| Longueur (m) | 100 |
| Épaisseur | 75µm |
| Largeur (cm) | 125 |
03 — Avis clients
Customer reviews
Comments All reviews
Très pratique, ce film donne vraiment plus de lumière partout sans se prendre la tête. Facile à fixer, ça le fait bien.
Recommended to buy: Yes
Ce film se manipule facilement et offre une belle diffusion lumineuse sans excès. Ma box bénéficie d'une ambiance plus douce, ce qui me plaît beaucoup. Livraison dans un emballage soigné, rapide et efficace.
Recommended to buy: Yes
Bon film, j'ai tendu ça vite fait dans mon espace. Ce qui m'a plu, c'est la diffusion bien homogène, zéro points chauds. Solide, ça fait le taf sans prise de tête. Livré nickel en plus.
Recommended to buy: Yes
Super investissement. Ça
Super investissement. Ça marche bien et dure longtemps. Recommande vivement.
Recommended to buy: Yes
Film Mylar très efficace, solide et facile à poser. Bonne réflexion avec les deux faces, la lumière est bien répartie. Très satisfait de la qualité.
Recommended to buy: Yes
04 — Questions sur ce produit
Product questions
Your questions about this product
- Is it preferable to use the diamond side or the white side to maximize light reflection in a medium-sized grow box?To maximize light reflection with the 1.25 x 100 m – 75µm White Diamond Mylar Film in a medium-sized grow box, it is preferable to use the diamond side. This side provides a more intense and direct reflection, ideal for enhancing brightness inside the growing space. The white side is recommended if you want a softer and more even light diffusion, but for maximum reflection efficiency, the diamond side is clearly the best choice.
- What is the real impact of using the eco white diamond Mylar film 75 microns on light distribution and plant growth in hydroponics compared to a classic matte white coating?The eco white diamond Mylar film 75µm significantly improves light distribution by reflecting up to 95% of light in multiple directions thanks to its textured surface. This multidirectional diffusion limits shadow areas and intense bright spots that are more often observed with a matte white coating, which reflects light in a more unidirectional manner.For hydroponic cultivation, this results in more uniform and vigorous growth: light reaches the lower leaves and peripheral areas better, thus stimulating photosynthesis across all plants. Furthermore, Mylar is highly durable and less prone to soiling, ensuring lasting performance.In summary, compared to a classic matte white, this film is an excellent choice for optimizing light and promoting optimal indoor growth.
- Does the 75 micron white eco mylar diamond film increase light reflection, but is it resistant enough to the heat generated by powerful HPS or LED lamps without deforming or losing effectiveness?The White Diamond Mylar Film 1.25 x 100 m – 75µm Eco Reflective is designed to optimize light reflection thanks to its durable polyester material and 75 micron thickness. Mylar generally withstands temperatures of up to approximately 149°C, making it compatible with the heat produced by powerful HPS or LED lamps, provided that a sufficient distance is maintained to avoid direct contact or excessive heat accumulation.
To ensure the longevity and effectiveness of the film, it is recommended to regularly monitor its condition and ensure proper installation, as prolonged exposure to very high temperatures could affect its reflective properties and structure.
- Do you think that this thickness of 75 microns significantly impacts the durability and the performance of reflection compared to a thinner or thicker mylar in a standard indoor growing environment?
The thickness of 75 microns for this Mylar film is an excellent compromise for indoor cultivation. It ensures good durability against handling and wear, much more than thinner films that risk tearing quickly. Furthermore, this thickness allows the film to remain well stretched on the walls, thus optimizing light reflection without significant loss.
In summary, this thickness does not diminish reflection performance, rather it enhances the longevity of the product in a standard indoor cultivation environment, without sacrificing the quality of the reflected light.
- What are the real advantages of the white diffusing side compared to the diamond side for flowering phase cultivation?
The white diffusing side of Mylar Film is ideal during the flowering phase because it evenly distributes light, which limits shadowed areas and promotes balanced flower development, especially in the denser parts of the plants. It creates a more uniform bright environment, beneficial for harmonious growth.
In contrast, the reflective diamond side sends back a more intense and direct light, stimulating photosynthesis. However, during flowering, an excess of intensity can sometimes cause stress to the plants. That is why the diffusion offered by the white side is often preferred during this critical phase.
In summary, the white side is a safe choice for optimized flowering due to well-distributed light, while the diamond side is useful for maximizing light intensity when needed.
- Which face of the Mylar film should be placed facing the light source to optimize reflection without risking a reduction in diffusion?
For the Mylar White Diamond Film 1.25 x 100 m – 75µm Eco Reflective, it is generally not necessary to favor a particular side towards the light source. This type of film, often made of polyester, reflects light very well from both sides due to its diamond-like surface, providing effective diffuse reflection.
However, if one side has a shinier or metallic appearance, it is better to direct it towards the source to maximize direct reflection. In most cases, the orientation of the film does not have a major impact on diffusion, making it easy to install in your indoor growing space.
- Which side of the white diamond mylar film 1.25 x 100 m should I orient towards the lamps to maximize light reflection in my grow box?
To optimize light reflection in your box, orient the diamond side of the White Diamond Mylar Film 1.25 x 100 m – 75µm towards your lamps. This embossed side maximizes direct light bounce, thereby increasing the intensity received by your plants.
The white side, on the other hand, diffuses the light more gently, ideal for harmonizing the lighting and limiting stress during flowering.
In summary, diamond side towards the lamps for maximum reflection, white side for softer diffusion.
- Is integration possible with a home automation system such as light or temperature sensors to automatically adjust the position or orientation of the Mylar film in order to optimize light yield?
The Mylar Diamond White Film 1.25 x 100 m – 75µm Eco Reflective is designed to maximize light reflection in your growing space, but it cannot be automatically moved or oriented via a home automation system. In fact, there is no integrated mechanism that allows its position to be adjusted based on light or temperature sensors.
However, it is entirely possible to integrate smart sensors into your home automation setup to monitor these parameters and automatically act on other essential equipment such as lighting, ventilation, or mobile screens. This approach allows you to effectively optimize the microclimate and light input of your indoor cultivation, even if the Mylar film remains fixed.
To go further, some custom systems with movable panels covered with Mylar can be developed, but this is not a standard feature at present.
- Which side of the white eco diamond mylar film should I face towards my plants to optimize light reflection and promote uniform growth in my grow box?To optimize light reflection and promote uniform growth with the White Diamond Mylar Film 1.25 x 100 m – 75µm Eco Reflective, you should orient the diamond side towards the lamps. This textured surface focuses the light by bouncing it directly back, increasing the intensity received by your plants.
The white side, which is more matte, diffuses light gently towards the plants, limiting light stress, but to maximize reflection and light power, prioritize the diamond side facing the light source.
This orientation ensures optimal lighting and harmonious growth.
- Mylar white diamond film 75 microns really ideal to optimize light reflection with powerful LEDs in scrog or lst in 1x1 m space which side to prefer diamond or white for the most homogeneous cultivation?To optimize light reflection with the Mylar White Diamond Film 1.25 x 100 m – 75µm Reflective Eco in a 1x1 m space under SCROG or LST with powerful LEDs, it is advised to position the diamond side towards the light sources. This textured diamond-shaped side maximizes direct reflection and increases the intensity received, promoting uniform growth.
The white side diffuses light more softly, which can reduce light stress and improve distribution in lateral areas. For optimal efficiency, place the diamond side towards the LEDs and the white side on the walls or areas where soft diffusion is desired, combining power and uniformity in your cultivation. - Which side of the white diamond mylar film should I orient towards my plants to maximize light reflection and optimize growth in indoor cultivation?To maximize light reflection with the White Diamond Mylar Film 1.25 x 100 m – 75µm Eco Reflective, the diamonded (brighter) side should be oriented towards the light source, that is, towards your grow lights. This side reflects about 95% of the light and ensures uniform diffusion, thus optimizing the light power received by your plants.
The white, more matte side should be turned towards your plants, to diffuse the light more gently and limit potential light stress.
This setup guarantees maximum reflection and harmonious and vigorous growth in indoor cultivation.
- Which side of the white diamond mylar film should I choose for an installation in a grow box to maximize light reflection and limit heat dissipation?
To maximize light reflection and limit heat dissipation with the White Diamond Mylar Film 1.25 x 100 m – 75µm, the diamond side (shiny and embossed) should be facing the light source. This side reflects about 95% of the light and efficiently distributes the lighting in your box.
The white, more matte side should be oriented towards the plants to diffuse the light more gently and limit light stress.
This configuration optimizes light efficiency while contributing to better thermal management of your indoor setup.
- How to optimize the installation of the white diamond mylar film for ideal light reflection during growth and flowering in indoor cultivation?
To optimize the installation of the White Diamond Mylar Film 1.25 x 100 m – 75µm and achieve ideal light reflection in indoor cultivation, it is essential to orient the diamond side towards your horticultural lamps. This shiny side maximizes reflection and light intensity, stimulating growth and flowering.
Be sure to place the film on a well-cleaned, dust-free surface, applying it flat without wrinkles or bubbles to ensure even reflection. Completely cover the walls and ceiling by precisely adjusting the dimensions, and firmly secure the edges to prevent any peeling.
The film diffuses light evenly, limiting hot spots and plant stress, while being resistant to moisture and scratches due to its protective PET layer, making it ideal for a controlled indoor environment.
- Is it preferable to orient the diamond face or the white face towards the plants to optimize light reflection and limit heat absorption in an indoor growing space?
To optimize light reflection while limiting heat absorption in your indoor growing space with the White Diamond Mylar Film, it is advisable to orient the diamond face towards the light source. This face is the most reflective and will efficiently bounce back light.
The white face, which is more matte, should be positioned towards the plants. It will diffuse the light more gently, reducing light stress and promoting harmonious growth.
- Is it preferable to use the white side or the diamond side towards the plants to maximize light reflection and optimize growth in an indoor culture?To maximize light reflection and optimize the growth of your plants in indoor cultivation, it is preferable to orient the diamond side of the White Diamond Mylar Film towards the plants. This side, being shinier and textured, reflects more direct light, thus increasing the light intensity received, which stimulates more effective growth. The white side, which is more matte, diffuses light more softly, which can reduce light stress but does not maximize reflection. So, for optimal efficiency, place the diamond side towards the plants.
- Does the quality of light reflection remain constant after several cultivation cycles and exposure to humidity, or does the film show signs of visible degradation?
The Mylar White Diamond Film 1.25 x 100 m – 75 µm Eco Reflective is designed to provide optimal and durable light reflection. Its thick and robust structure ensures very good reflection quality even after several cultivation cycles and exposure to humidity.
It is sturdy, waterproof, and corrosion-resistant, which limits any visible degradation such as yellowing or creasing. However, to maintain its performance, it is important to keep it clean and taut. Excessive humidity or poor maintenance can eventually lead to micro-creasing or slight opacification, but these signs remain rare with appropriate use.
In summary, this film maintains excellent light reflection over time, perfect for demanding and durable indoor cultivation.
- What is the difference in brightness and electricity consumption with this 75-micron white diamond mylar compared to a standard black/white reflective film in 1.25x1.25 m for an indoor growing box?
The 75µm White Diamond Mylar Film provides a light reflection of around 95% thanks to its embossed diamond surface, which is significantly higher than the 85-90% of a standard black/white film. This improved reflection ensures a more uniform distribution of light, reducing shadow areas and light stress on the plants, which encourages more harmonious growth.
In terms of electrical consumption, this efficiency means you can achieve optimal lighting with equal power, or slightly reduce the power needed for the same performance, optimizing your overall consumption.
In summary, the White Diamond Mylar significantly enhances the useful brightness in your box (1.25 x 1.25 m), while allowing for a more economical and qualitative management of your horticultural lighting.
- Which side of the white diamond mylar film is best suited for the type of crop in the growth phase versus the flowering phase in order to optimize differential light management?
To optimize differential light management with the White Diamond Mylar Film 1.25 x 100 m – 75µm, here is the best orientation of the sides depending on the phase:
- Growth phase: orient the diamond side towards the lamp. Its small diamond structure amplifies direct reflection and light intensity, promoting rapid and vigorous growth.
- Flowering phase: place the white side facing the lamp. It diffuses light more uniformly, limiting light stress and improving distribution around the flowers for optimal bud development.
This simple inversion allows for adapting light reflection to the specific needs of your plants at each stage, for a more efficient indoor cultivation.
- Which side of the white diamond mylar film should I orient towards the plants for optimal light reflection during growth and flowering?
For optimal light reflection with the White Diamond Mylar Film 1.25 x 100 m – 75µm Eco Reflective, the diamond side (shiny and embossed in a diamond pattern) should be oriented towards the light source, that is, the grow lamps. This side maximizes direct reflection and diffusely distributes light evenly, avoiding hot spots while enhancing light yield during growth and flowering.
The white matte side should be placed towards the walls or outside, as it reflects direct light less effectively. This setup ensures powerful and well-distributed lighting for your plants.
- Does mylar maintain its reflective efficiency after several growing cycles in humid conditions?The White Diamond Mylar Film 1.25 x 100 m – 75µm retains its reflective efficiency even after several growing cycles in humid conditions. Thanks to its thickness of 75 microns and protective PET layer, it withstands moisture, mold, and scratches very well. It remains taut and efficient, ensuring optimal light reflection for your plants in the long term.
- Which side of the mylar should I orient towards the plants to maximize light reflection and optimize growth in my indoor cultivation?
To maximize light reflection with the White Diamond Mylar Film 1.25 x 100 m – 75µm, it is important to orient the diamond side towards the light source (your lamps). This diamond-textured side reflects light more intensely and diffusely, thereby optimizing the lighting received by your plants and thus their growth.
The white, more matte side offers softer diffusion but does not maximize reflection. For maximum efficiency, prioritize the diamond side towards the light.
