Product successfully added to your shopping cart
Ça pousse dans le bon sens
4 products
Maximize every ray of light in your grow space with our high-quality reflective sheets . Essential for maximizing the light output of your LED grow lights, these films and sheets improve even light distribution across your plants, reduce losses, and promote healthier, faster growth.
In a grow room, much of the light emitted by your lamps is absorbed by the walls. Reflective Mylar or black/white sheeting can redirect this light towards your plants , improving the overall light output of your setup. It's a simple, cost-effective, and extremely effective solution for increasing the productivity of your indoor grows.
Secure your tarp to the walls using double-sided tape or special clamps. Make sure to keep the surface taut to avoid wrinkles, which can concentrate light and create hot spots. Combine your installation with a suitable ventilation system to maintain a consistent temperature.
Whether you're a beginner or an expert, GrowLED reflective sheets help you get the most out of your grow room. By reducing light loss, you optimize photosynthesis and promote more abundant harvests.
Help & advice
About Reflective Sheets — click a question to see the answer.
As an expert, I can tell you that the main purpose of reflective sheeting is to optimize light utilization in your grow space. It helps redirect the light emitted by your LED lamps towards your plants, including areas that would normally be less illuminated, thus ensuring homogeneous distribution and maximizing light efficiency. It's a key element for healthy and vigorous growth.
That's an excellent question I often encounter! If I had to choose, I'd say that Mylar is generally superior to white paint in terms of reflectivity. Mylar, especially high-quality versions, can achieve reflection rates of 90-97%, whereas good matte white paint will be around 80-85%. For maximum efficiency of your cultivation setups, I recommend Mylar.
To choose the right sheeting, I advise you to consider several factors. Firstly, the reflectivity rate is crucial: aim for the highest possible (90% and above). Then, tear resistance and durability are important, especially if you need to handle it often. Finally, ease of cleaning and the non-toxicity of the material are points I always take into account for the safety of your plants.
In practice, I recommend aiming for a reflectivity percentage of at least 90%. This is the threshold at which you start to see a real difference in light distribution and the efficiency of your LED lamps. High-quality Mylar sheeting can even reach 95% or more, which is ideal for maximizing every photon and promoting optimal plant growth.
Installation is quite simple but requires precision. I advise you to start by cleaning and drying the surfaces. Then, attach the sheeting as smoothly as possible, without creases, to avoid hot spots and ensure uniform reflection. You can use staples, double-sided tape, or clips, making sure it covers all interior walls of your space for maximum reflection.
The most common mistake I see is not ensuring that the sheeting is perfectly smooth and clean. Creases create shaded and hot areas, while dust or dirt significantly reduce reflectivity. I recommend cleaning it regularly and ensuring a perfectly smooth installation to guarantee optimal efficiency of your cultivation accessories.
To specifically optimize the light from your LEDs, I strongly recommend high-quality Mylar sheeting, especially those with a 'diamond' or 'textured' finish. These textures help diffuse light more uniformly, avoiding hot spots and ensuring that every part of your plants benefits from optimal lighting. It's an investment that pays off in terms of yield.
Cannot find your answer? 01 88 33 45 52 or by message.
