Achat vérifié
La prise en main est rapide, ça donne des mesures fiables sans prise de tête. Livré avec tout le nécessaire, c’est pratique. Juste un peu lourd dans la main mais ça rassure niveau solidité. Je recommande.
EC/PH testers
pH, Temperature and Conductivity EC / TDS Tester - Milwaukee MW804
4.8
Réf. TEST-EC-MILW-MW804
pH, Temperature and Conductivity EC / TDS Tester - Milwaukee MW804
Mesure Milwaukee Testeur…
Discover the Milwaukee MW804 tester is ideal for measuring pH, temperature and EC/TDS conductivity . You can obtain all these measurements with one and the same device!
Satisfait ou remboursé
14 jours
Retour 14 jours
Frais de retour à votre charge
SAV expert FR
Conseil horticole
Paiement en plusieurs fois
with Alma, from €50 — or pay in 15 days from €100
pH, Temperature and Conductivity EC /...
174,90 €
Parraine tes proches
5 % pour toi & 5 % pour ton ami
Description
Product presentation
The Milwaukee MW804 pocket tester is ideal for measuring pH, temperature and EC/TDS conductivity. It is equipped with a large screen for good visualization of measurements and has a stability indicator. It also has a function that retains information on the screen.
Perfect for making quick and precise measurements, the Milwaukee MW804 can be used in various fields such as water treatment, laboratories and the food industry.
Characteristics
- Brand: Milwaukee
- Model: MW804
- pH measuring range: 0.00 to 14.00 pH
- EC measurement range: 0 to 20.00 mS/cm
- TDS measurement range: 0 to 10.00 ppt
- Temperature range: 0 to 50ºC
- Accuracy (25ºC) pH: ± 0.05 - pH: ± 2% EC / TDS - ºC ± 0.05
- 1.5V button batteries
- Weight: 150g
Technical data sheet
Features detailed
| Functions | Mesure |
|---|---|
| Marque | Milwaukee |
| Type | Testeur pH/EC/TDS/Température |
| Compatibilité | systèmes hydroponiques, aquariums, aquacultures |
| Alimentation | piles LR44 1.5V |
| Précision | ±0.05 pH, ±2% EC, ±2% TDS, ±0.05°C Temp |
| Étalonnage | auto pH 2pts/EC 1pt |
| Type d'instrument | Conductivimètre (EC) |
| Plage de mesure CO2 (ppm) | 0 à 20.00 |
| Caractéristique additionnelle | ATC, fonction HOLD, auto-off, étanche |
Convinced? Shipped from France. Add to cart — 174,90 €
They've adopted it
Reviews customers
Achat vérifié
Reçu en bon
Reçu en bon état et bien protégé. Fonctionne parfaitement. Très satisfait du service.
Achat vérifié
Produit de qualité
Produit de qualité, livraison rapide. Les résultats sont au rendez-vous. Merci beaucoup.
Achat vérifié
Produit correct. Fonctionne bien
Produit correct. Fonctionne bien, mais j'ai eu quelques soucis à l'installation. La livraison a été acceptable. Le service client a aidé rapidement. Bon pour le prix. Je recommande, mais avec des réserves.
Aucun avis ne correspond à ce filtre.
Frequently asked questions
Your questions
Does the Milwaukee MW804 tester provide an API or a way to integrate the data collected into a third-party system, such as a smart agricultural management system?
The Milwaukee MW804 tester is a multifunctional tool designed for pH, conductivity, total dissolved solids (TDS) and temperature testing. It stands out for its automatic calibration, durability and practicality. However, it does not integrate digital connectivity or data export features. It is rather presented as a standalone device intended for field measurements. At present, no API or integration capacity to third-party smart agriculture management systems has been indicated for this model. But this does not question its usefulness and effectiveness in obtaining quality data in indoor cultivation.
Can the Milwaukee MW804 tester be used for measurements in an aquarium to ensure a healthy environment for fish?
Absolutely, the Milwaukee MW804 tester is perfectly suited for measurements in an aquarium. It will allow you to monitor four essential parameters to maintain a healthy environment for your fish: pH, electrical conductivity (EC), total dissolved solids (TDS), and temperature. Its accuracy is high, it is easy to use, and its watertightness gives it a robustness suited to fishkeeping. Moreover, although originally designed for growers, the MW804 precisely measures the parameters that determine the health of aquarium water. So don't hesitate, it's a great choice to ensure the well-being of your fish! You can find it in the dedicated section of our website GrowLED.fr.
Does the Milwaukee MW804 tester retain pH calibrations after battery change to avoid frequent recalibration?
The Milwaukee MW804 tester has a memory capable of storing up to five automatic calibration points, which suggests that pH calibrations are generally retained after a battery change. However, this retention is not explicitly confirmed in the official documentation.
To ensure optimal accuracy, it is therefore recommended to check the calibration of the tester after each battery replacement. This precaution will help guarantee reliable measurements without excessive recalibration.
What is the recommended calibration frequency to ensure the accuracy of the Milwaukee MW804 pH, temperature, and conductivity tester during hydroponic measurements?
To ensure the accuracy of your Milwaukee MW804 pH, temperature, and conductivity tester in hydroponics, it is recommended to calibrate it regularly, ideally before each measurement series. Two-point calibration is the most effective: start with a neutral point (pH 7.01 or 6.86) and then an acidic or basic point depending on your use.
Remember to clean the electrode after each use with distilled or purified water and to store it in an appropriate solution. These practices prolong accuracy and limit drift, which prevents the need for frequent recalibration. If you work in demanding environments, such as saline solutions, increase the calibration frequency to maintain reliable measurements.
Can the MW804 tester be easily recalibrated in the field to ensure pH and EC accuracy over time with the same probe without having to change any parts?
The Milwaukee MW804 tester is designed for easy and quick calibration in the field. You can recalibrate pH and EC measurements without changing the probe or any parts, as long as the probe remains in good condition.
Automatic calibration allows you to memorize up to 5 points, and you simply need to use the appropriate solutions (pH 4.01, pH 7.01, or specific EC solution) to maintain optimal accuracy. This operation can be repeated as often as necessary, ensuring reliable monitoring of your crops.
Is the MW804 tester ready for immediate use with supplied electrolytes or does it require additional solutions for calibration?
The Milwaukee MW804 tester comes with electrolytes for calibration: pH 4.01 buffer solution, pH 7.01, and conductivity 12880 μS/cm. It is therefore ready for immediate use.
To ensure accuracy in your measurements, just remember to regularly calibrate the device with the provided solutions. No additional purchase is necessary at the start, except in the long term where a renewal of solutions may be useful.
Is the Milwaukee MW804 tester accurate and reliable for measuring pH and conductivity in a demanding hydroponic system?
The Milwaukee MW804 tester is perfectly suited for a demanding hydroponic system. It offers a precision of ±0.05 pH and ±2% on the EC/TDS conductivity measurement, which meets the strict needs of nutrient parameter control. Its multi-point automatic calibration ensures the stability and reliability of measurements essential for regular use.
Designed specifically to monitor nutrient solutions, it facilitates the prevention of deficiencies and toxicities with quick and accurate readings, along with practical features like the stability indicator and the hold function. Portable and waterproof, it fits perfectly into the routine of any attentive hydroponics enthusiast.
To optimize accuracy, make sure to regularly calibrate your MW804, especially after each battery change. This simple gesture ensures consistent performance over time.
What frequency of recalibration do you recommend to ensure optimal pH and conductivity accuracy with the Milwaukee MW804 tester in agricultural greenhouse use?
To ensure optimal accuracy of pH and conductivity with the Milwaukee MW804 tester in a greenhouse, it is advisable to perform a recalibration before each series of measurements. This two-point calibration, starting with a neutral point (pH 7.01 or 6.86), followed by an acid or basic point suitable for your application, will ensure the reliability of the readings.
Additionally, it is essential to clean the electrode after each use with distilled or osmosis water, store the probe in a dedicated solution, and recalibrate more often when used in saline solutions. Also, do not forget to recalibrate after every battery change to maintain consistent performance.
This rigor in maintenance and calibration fully utilizes the functionalities of the MW804, which memorizes up to 5 calibration points, providing robust and lasting accuracy.
Not seeing your question?
Your browsing
Viewed recently
Related articles
Hydroponics for Beginners: Introducing the Terra Aquatica Ebb & Grow SystemThis article introduces hydroponics, a soilless growing method, focusing on Terra Aquatica 's Ebb & Grow system ,...
Read more
