Please login or create account
Digital temperature and vacuum controller - GSE
Expand 
The GSE climate management device allows you to manage the climate of your growing space.
Digital temperature and vacuum controller - GSE
Our team will reply within 24 business hours.
Ref:
Warning: Last items in stock!
Availability date:
The GSE digital controller maintains a constant temperature within your crop. You can adjust the temperature and pressure of your growing space.
It can be connected to an air injector and an air extraction, at the same time thanks to its two sockets on each side.
Sold ready to use, it complies with the IP44 standard which allows it to be used in humid spaces.
| Waterproof | IP54 |
| Plug & Play | No |
| Marque | GSE |
| Type | Thermostat |
| Compatibilité | Ventilateurs d'intraction et extraction |
| Longueur du câble (m) | 4 |
| Isolation phonique | Non |
| Précision | ±0,5°C |
| Dimensions (mm) | 160x100x90 |
| Plage de température (°C) | 20-32 |
| Avec sonde externe | Oui |
| Courant (A) | 5 |
| Hystérésis | 1-8°C |
Utiliser ce contrôleur, c'est avoir l'esprit tranquille! Les ventilateurs s'adaptent sans faire de bruit un peu agaçant. Prix plus que correct pour cette gestion fine. Je recommande clairement.
Nickel
Franchement bluffé.
Excellent rapport qualité-prix
Excellent rapport qualité-prix. Fonctionne comme prévu. Très content de mon achat.
Content
Reçu rapidement.
To precisely manage temperature and depression with the GSE digital controller, it is essential to configure its settings according to each phase of cultivation.
In the growth phase, set the temperature between 20°C and 25°C, and during flowering, lower it slightly to 18-22°C. Use the hysteresis setting to avoid frequent starts, thus preserving climate stability.
Regarding depression, adjust the minimum fan speed to ensure a constant air renewal, avoiding stagnation and excessive drafts. During flowering, you can slightly increase depression for better evacuation without disturbing your plants.
Position the temperature probe at the canopy level for an accurate measurement and make your adjustments gradually, while observing your plants. Ideally, validate the measurements with an independent thermometer/hygrometer to ensure an optimal environment.
This precise control using the GSE allows for a suitable climate balance that promotes healthy growth followed by maximum flowering indoors.
The Digital Temperature and Vacuum Controller - GSE synchronizes temperature control and extractor management through its two distinct outputs, one for an air injector and the other for an extractor. This configuration allows for simultaneous adjustment of temperature and pressure in the cultivation, thus avoiding pressure fluctuations that could disturb the plants' environment.
The controller continuously adjusts the connected accessories to maintain a stable balance, ensuring optimal conditions without temperature or pressure jolts. Its IP44 robustness also ensures significant reliability in the humid environments often found in indoor cultivation.
The electrical consumption of the GSE-TEMP-DEP controller in continuous operation is not publicly specified in the available documents. However, as with most digital temperature and vacuum controllers, it is generally low, on the order of a few watts, sufficient to power the sensors, microprocessor, and control units.
This feature ensures efficient management without excessive energy consumption, suitable for permanent indoor use.
The average response time of the GSE-TEMP-DEP controller to stabilize the temperature and depression after a setpoint modification is not precisely specified. However, based on a similar model in the GSE range, stabilization generally occurs between a few minutes and about an hour, depending on the initial deviation, the volume of the room, and the quality of the insulation. Therefore, it is reasonable to expect a response within this range, adapted to the size and conditions of your growing space.
The Digital temperature and vacuum controller - GSE allows for the management of temperature, humidity, pressure, and ventilation, but only with global settings for the entire room.
It is not possible to program different ranges for two cultures in parallel in the same space with this controller. Each setting is uniformly applied, without distinction of area.
To manage two distinct environments simultaneously, it would be necessary to install two controllers and physically separate the growing zones.
The GSE-TEMP-DEP digital controller does not have accessible documentation specifying its compatibility with simultaneous management of extraction and intake systems for a small box. Without clear technical information, it is difficult to confirm whether it supports this type of simultaneous installation.
For a suitable solution, it may be worthwhile to consider controllers specifically designed to manage multiple extractors and air inlets in parallel, thus ensuring precise control of temperature and depression in your growing space.
The Digital Controller for Temperature and Pressure - GSE is compatible with the majority of silent extractors on the market, provided that their electrical characteristics (voltage, power) match the capabilities of the controller (up to 2x600W depending on the model). It ensures silent operation by preventing the complete stop of the fan through fine management of the minimum speed.
Regarding adjustments, some advanced GSE models allow precise and simultaneous control of temperature and pressure in the growing chamber. You can independently configure the desired thresholds for automated and efficient indoor climate control.
For optimal use, it is important to choose the GSE model that suits your specific needs by checking for the presence of pressure/vacuum functions in its technical specifications.
The GSE digital temperature and pressure controller is perfectly compatible with a 60x60 cm micro box. It does not disturb the natural airflow as it adjusts the speed of fans and extractors in real-time thanks to its precise temperature and pressure probes. This fine regulation helps maintain an optimal balance without forcing a constant airflow, thus preserving the quality of air circulation.
For optimal operation, it is essential that the fans and extractors are properly sized and compatible with the controller. Proper installation and configuration will ensure effective control of temperature and pressure, without hindering the natural air renewal in your micro box.
The Digital temperature and vacuum controller - GSE simultaneously manages temperature and vacuum using precise sensors and intelligent fan control. It measures the temperature with great accuracy (±0.5 °C) and adjusts the fan speed to maintain a stable negative pressure, optimizing ventilation without disrupting thermal stability.
By continuously controlling these two parameters, it creates an ideal environment where air circulates efficiently while maintaining a constant temperature, essential for plant health and air quality. Furthermore, it can manage two fans, allowing for appropriate and flexible ventilation according to the specific needs of your growing space.
The Digital Temperature and Vacuum Controller - GSE is compatible with most standard air extractors thanks to its two separate outputs allowing control of both extractor and air injector. This design ensures synchronized and efficient management of ventilation and pressure.
Calibration remains simple and intuitive via a digital interface, with a ready-to-use configuration including a temperature sensor. Although the procedure is not detailed, the device is designed to facilitate commissioning by the user.
Finally, its robust design (IP44) and automated functionalities make it an excellent choice for small growing areas, ensuring a stable climate and easy integration.
The Digital Temperature and Depression Controller - GSE is designed to manage these two essential parameters for your crop. Generally, this type of controller allows for a differentiated management of temperature and depression according to growth phases, such as growth and flowering, in order to optimize conditions specific to each stage.
However, without precise documentation, it is difficult to assert with certainty that this model integrates a distinct programming for each phase. For advanced control, you may consider systems equipped with programmable clocks or multifunctional settings.
If you are looking for very precise and differentiated control, feel free to explore our other environmental regulation solutions, tailored to all stages of cultivation under LED: our selection of controllers.
The Digital Temperature and Vacuum Controller - GSE is perfectly designed to manage an extractor and an intractor simultaneously thanks to its two separate outputs, which allows for maintaining a stable temperature and pressure in your growing space.
It can therefore control an 80x80 extractor and a 40x40 intractor at the same time without loss of performance, provided that the total electrical power does not exceed the relay capacity of the controller. It is essential to check the fan consumption to ensure this electrical compatibility.
This controller intelligently adjusts both devices to preserve an optimal environment, ensuring precise and effective control for your plants.
The Digital Temperature and Vacuum Controller - GSE is compatible with any type of inlet and outlet due to its two distinct outputs, allowing for simultaneous and synchronized management of air injection and extraction. This prevents pressure fluctuations and ensures a stable climate for your plants.
It offers precise settings to optimize temperature (±0.5 °C) and vacuum, adjustable according to growth phases, with a hysteresis system that stabilizes regulation and limits too frequent on/off cycles. The minimum fan speed can also be adjusted to ensure good ventilation without unwanted drafts.
Finally, its installation is simple and effective, with no need for additional equipment. The controller is ready to use, IP44 compliant, and connects directly to your existing equipment, making integration easier. It is an excellent choice for reliable and precise control of temperature and pressure in your growing space.
The GSE-TEMP-DEP controller does not appear to offer the capability to manage different temperature and pressure ranges simultaneously, a key feature for optimizing a SCROG under LED. No available technical element confirms this advanced multi-parameter capability.
For precise control tailored to a SCROG culture, it may be beneficial to look towards systems specifically designed for the simultaneous management of multiple temperature and pressure ranges, often offered in our horticultural solutions.
Yes, the GSE-TEMP-DEP controller allows for very precise control of temperature and depression in a 60x60 cm micro box. Thanks to its built-in sensors and advanced digital electronics, it ensures stable and reliable regulation of both parameters simultaneously. It's an ideal choice for maintaining optimal conditions in a confined space, especially for cultures or applications requiring a rigorously controlled environment.
To optimize differentiated temperature management with the GSE-TEMP-DEP digital controller, you need to manually set the temperature according to the growth phase:
The controller also manages the depression for optimal air renewal through the connected fans.
Place the sensor in a representative location, away from direct sources of heat or light, to obtain reliable measurements.
Warning: this model applies a uniform setting to the entire space. For actual differentiated management, it is advisable to physically separate your growing areas or use two distinct controllers, each dedicated to one phase (growth or flowering).
To adjust the load shedding between the extractor and the intractor using the GSE digital controller, start by connecting the intractor to the left socket and the extractor to the right socket. Place the probe in a representative location, away from direct heat sources.
Next, set the target temperature and the desired vacuum via the knobs. The controller will automatically adjust the fan speeds to maintain that negative pressure and the ideal temperature.
To optimize the balance, check and adjust the minimum fan speed to ensure stable air renewal without creating excessive drafts. The integrated hysteresis system reduces frequent starts, thereby preventing sharp fluctuations in pressure and temperature.
Finally, let the system run in automatic mode, observe it for a few hours, and then fine-tune the settings if necessary for a stable and favorable climate for your plants.
The Digital Temperature and Vacuum Controller - GSE offers an accuracy of ±0.5 °C for temperature and measures vacuum through a very precise digital sensor, ensuring reliable and fine control of the climatic conditions in your box.
It adjusts in real-time the speed of intake and exhaust fans to maintain temperature and vacuum according to your settings, ensuring an optimal air balance.
This model has two distinct outputs (5A sockets) to simultaneously control at least two fans (intake and exhaust). To effectively manage multiple devices, it is essential not to exceed the electrical capacity of the built-in relays and to choose compatible and appropriately sized fans.
In summary, this controller is perfectly suited for precise and efficient management of temperature, vacuum, and ventilation in a commonly sized cultivation box.
To integrate the Digital Temperature and Vacuum Controller - GSE into your existing automation system and synchronize temperature and pressure in real time, it is essential first to check the communication interfaces available on the controller (RS232, RS485, Ethernet). Next, ensure that your automation system can receive these signals via compatible protocols and accept analog or digital data.
You will then need to configure the controller to continuously transmit temperature and pressure measurements, and program your PLC or software to process this data in real time, trigger actions according to the desired thresholds, and ensure a smooth update.
Finally, rigorous testing will validate the proper synchronization between the two parameters. This approach ensures precise and dynamic management of your LED-lit growing environment.
The Digital Temperature and Vacuum Controller - GSE synchronizes the management of temperature and pressure through an intelligent configuration of two distinct outputs: one for an air injector and another for an extractor. With built-in sensors, it continuously measures these two parameters and simultaneously adjusts the ventilation to maintain a perfect balance.
This modulation of fan speed allows for the stabilization of temperature while maintaining constant pressure, thus avoiding imbalances that could harm hydroponic cultivation. The user can set precise thresholds, and the controller dynamically adjusts the environment to ensure a stable and optimal climate for plant growth.
The Digital temperature and vacuum controller - GSE synchronizes the temperature regulation and pressure management through real-time measurement of key parameters (temperature, humidity, depression) with high precision. It automatically adjusts the speed of the extraction and injection fans to maintain a perfect balance, thereby avoiding sharp fluctuations that could harm the crop.
Through integrated management, it orchestrates the action of the fans and heating or humidification equipment to ensure a stable environment. Its simple interface allows for easy adjustment of setpoints, while the ability to integrate into an automation system ensures continuous precise control, essential for an optimized growing space under LED lighting.
