Question 1

Hello, does this Bluelab external box allow the synchronization of multiple lock sensors simultaneously to ensure more reliable protection of the greenhouse, or is it limited to only one external sensor?

Accepted Answer

The Bluelab Lockout and Alarm Box external unit allows the connection of external switches to the Bluelab Pro Controller to activate a lock mode and prevent dosing. However, there is no specific information about synchronizing multiple sensors simultaneously. It appears to be designed for a single external sensor, with no clear indication of managing multiple sensors at once. For enhanced security, it is advisable to use a single sensor setup or to verify further details based on your installation.

Question 2

Can this Bluelab external box really prevent any accidental dosing even if I'm not on site, and is it easy to install for someone who is not handy?

Accepted Answer

The Bluelab external box indeed prevents any accidental dosing by putting the system into lock mode as soon as an external switch is activated, which effectively protects your plants even in your absence. For installation, it requires wiring of the external switches. It is not really a plug-and-play product, so if you are not handy, it is better to call someone who knows a bit about electricity to ensure a safe and optimal installation.

Question 3

The Bluelab external housing allows you to lock the Bluelab Pro Controller in case of activation of an external switch, but can this system also be configured to send a remote alert, such as an email or a notification on a smartphone?

Accepted Answer

The Bluelab external housing does indeed allow you to lock the Pro Controller when an external switch is activated and triggers a local audible or visual alarm. However, it cannot directly send remote alerts, such as emails or smartphone notifications.To receive remote alerts, you need to use the Bluelab Connect software linked to the Pro Controller, which manages alarms related to measured parameters (pH, temperature, etc.). However, this system does not seem to directly take into account alerts generated by the external housing.In summary, remote monitoring is possible via Bluelab Connect for controller parameters, but not for specific events of the external housing, unless unconfirmed additional integration.

Question 4

Is the reaction time between the activation of the external sensor and the locking of the Bluelab Pro Controller less than 1 second to ensure optimal safety in case of hydraulic problems?

Accepted Answer

The Bluelab External Lockout and Alarm Box does indeed allow for locking the Pro Controller as soon as an external sensor is activated, immediately interrupting any dosing action. However, official data does not specify whether this reaction time is less than 1 second. To date, no available source confirms such a quick response time guaranteeing optimal safety in case of hydraulic problems.

Question 5

What is the power consumption of this Bluelab lock alarm box in continuous operation?

Accepted Answer

The power consumption of the Bluelab external lock and alarm box during continuous operation is unfortunately not specified in the available sources. This box is designed to secure and alert in your cultivation setups, but its detailed technical data, such as its consumption, remains confidential. For a more precise estimate, feel free to check other electronic control equipment in our catalogue, where consumptions are often indicated.

Question 6

How does the Bluelab external lockout and alarm box connect to the Bluelab Pro Controller, and is it easy to use with an existing greenhouse system?

Accepted Answer

The Bluelab External Lockout and Alarm Box connects very simply to the Bluelab Pro Controller via a specific cable provided. This cable connects to the "ALARM" socket of the Pro Controller and to its other end to the external box. This box allows the integration of external switches such as float switches or level sensors. As soon as a sensor detects an anomaly (for example, a critical water level), the system locks the control of the Pro Controller by interrupting the nutrient dosing and triggers an audible alarm in the box. Additionally, an external alarm can be connected for further visibility or audibility. Its integration into an existing greenhouse system is easy: it uses standard horticultural connections and works with most classic external sensors. The installation is clear, accessible, and ensures enhanced safety for crop automation.

Question 7

What is the average reset time of the external lockbox after activation to ensure an effective restart of dosing with the Bluelab Pro Controller?

Accepted Answer

The average reset time of the Bluelab external lockbox after activation is not specifically indicated. When an external switch activates the lock, the Bluelab Pro Controller blocks all dosing until the lock conditions are lifted and the system is manually reset. Therefore, the cause of the lock (e.g., float switches or alarms) must first be disabled to allow for an effective restart of dosing. This process is immediate once the conditions are restored, but the exact duration will depend on the management of interruptions in your installation. This box offers valuable safety to prevent uncontrolled dosing, ideal for precise and reliable control of your crop.

Question 8

How is the lockout mode reset once the alarm is triggered on this Bluelab external box?

Accepted Answer

The Bluelab External Lockout and Alarm Box puts the controller in lockout mode as soon as an external switch is activated, stopping all dosing. To reset this mode after an alarm, the external switch that triggered the alarm generally needs to be turned off. This action releases the lockout and allows the system to resume normal operation. We recommend consulting the manual provided with the box for precise reset instructions.

Question 9

Does the lock mode also activate a manual lock to prevent any modifications during the alarm or is it just an automatic cutoff of dosages?

Accepted Answer

The Bluelab external lock and alarm box activates an automatic cutoff of dosages as soon as an external switch or alarm is triggered. This means that all dosages are stopped until a manual reset occurs. However, this lock mode does not explicitly block the manual modification of settings on the controller: it only protects against any new dosing operations, without completely immobilizing the user interface during the alarm. Thus, this system focuses on safety related to dosing, without preventing manual adjustments to the settings.

Question 10

Can this Bluelab box be integrated with an existing home automation system to receive alerts and control the locking remotely via a voice assistant or a smartphone app?

Accepted Answer

The Bluelab external lock and alarm box does not offer direct integration with an existing home automation system. It only allows for local locking of the dosage to be triggered via an external switch and to activate an audible or visual alarm on-site.It is not possible to receive alerts remotely or control this locking via a voice assistant or a smartphone app. For remote monitoring of parameters such as pH or conductivity, Bluelab offers the Bluelab Connect software (compatible with certain Wi-Fi controllers), but it does not handle events related to the external box.In summary, no specific remote management or alerting for the locking box is provided natively; an independent home automation solution will need to be considered for this type of functionality.

Question 11

How to reliably and easily reset the lock mode on the Bluelab external casing in case of an active alarm?

Accepted Answer

To simply and reliably reset the lock mode on the Bluelab external casing in case of an active alarm, it is essential to first correct the cause of the alarm (such as a low level or a sensor issue). The external casing does not have a reset button: the deactivation of the lock is only done via the Bluelab Pro Controller after the problem has been resolved. Then, check that the lock mode is indeed lifted on the controller and that automatic injection resumes normally.

Question 12

Compatible with voice assistant integration to trigger alarm or remote locking via Bluelab Pro Controller?

Accepted Answer

The Bluelab external locking and alarm box connects perfectly to the Bluelab Pro Controller to stop dosing and trigger a local alarm in case of alerts detected by external sensors. However, it does not integrate remote control via voice assistant nor send remote alerts related to these events. For remote monitoring and alerts, Bluelab offers the Bluelab Connect software, but this does not explicitly cover alarms generated by the external box. In summary, management of locking and alarm via this box remains local without direct integration to voice assistants.

Question 13

What is the locking precision of the Bluelab Box on a microcontroller in compact micro-culture?

Accepted Answer

The Bluelab External Box offers software locking of pH channels when threshold alarms are reached, preventing any involuntary modification of control. Regarding the precision of this locking on a microcontroller in compact micro-culture, no specific technical data is available. However, Bluelab instruments guarantee very good measurement precision of essential parameters (±0.1 for pH and EC, ±1°C for temperature), ensuring reliable management of your culture.

Question 14

What is the continuous power consumption of this Bluelab locking and alarm box, and what is its impact on the overall efficiency of my system?

Accepted Answer

The Bluelab external locking and alarm box consumes very little energy in continuous operation, generally only a few milliwatts to a maximum of a few watts, as it is a passive control system with a limited sound alarm. This consumption is therefore negligible compared to that of other equipment in your installation (lighting, pumps, controllers). Its impact on overall efficiency is primarily positive: by ensuring enhanced security through automatic interruption of dosing in case of detected anomalies, it prevents technical errors that may affect the growth and health of your plants. The manual reset of the system guarantees you rigorous control and targeted intervention.

Question 15

How is the integration and configuration of the external lockout sensor on the Bluelab controller carried out to ensure immediate cessation of dosing in the event of a problem detection?

Accepted Answer

The Bluelab External Lockout and Alarm Box allows integration of an external lockout sensor (floater, level detector, or other switch) directly to the Bluelab Pro controller via a simple connection of alarm and dosing cables. As soon as the sensor detects an anomaly and activates its switch, the controller enters lockout mode: dosing is immediately stopped to protect the crop from any risk of overdosing or failure. A local alarm visually and/or audibly alerts the user, and the system remains in lockout until a manual reset, ensuring safe intervention before resuming. The box accepts normally open or closed switches, offering great flexibility of integration depending on the type of sensor chosen.

Question 16

Is the Bluelab external locking and alarm box easy to install and compatible with an external alarm system for indoor greenhouses?

Accepted Answer

The Bluelab external locking and alarm box is compatible with an external alarm system for indoor greenhouses, provided it can be connected via switches. It allows you to activate a locking mode that blocks any further dosing until reset. Regarding installation, it requires precise wiring and a certain level of electrical skill. It is not a plug-and-play product, but the instructions are clear, and the system works very well once installed. In summary: compatible with external alarms via switches, technical installation but feasible, and effective to secure your system against accidental doses.

Question 17

Are the Bluelab alarm lock box and alarm compatible with other models besides the Bluelab Pro Controller?

Accepted Answer

The Bluelab external lock and alarm box is designed exclusively to work with the Bluelab Pro Controller. It allows you to put this controller in lock mode via external sensors, thus interrupting the dosing until a manual reset. This box is not compatible with other Bluelab models or third-party devices, as its operation specifically relies on the internal logic of the Pro Controller. It also does not offer remote notifications or connected integrations. In summary, for reliable and secure operation, it is recommended to use it only with the Bluelab Pro Controller.

Question 18

Compatible with voice assistants to remotely stop and start the lock mode of the Bluelab Pro Controller?

Accepted Answer

The Bluelab external lock and alarm enclosure does not allow remote control via voice assistants to start or stop the lock mode. Disabling can only be done directly on the Bluelab Pro Controller once the cause of the alarm is resolved. No native function incorporates remote management or alerts via voice assistant. For remote control, an independent home automation solution would need to be considered.

Question 19

External Bluelab casing: locking and alarm 100% compatible with Pro Controller, useful for stopping dosing with an external sensor. Can a locking sensor be integrated for automatic cutoff in case of low water flow in a micro cultivation space?

Accepted Answer

The Bluelab external locking and alarm casing is fully compatible with the Bluelab Pro Controller and allows for the integration of a locking sensor, specifically a water flow sensor. Thus, in the event of low or no flow, it automatically puts the system in lock mode, immediately stopping any dosing. This is an ideal solution to secure your micro cultivation spaces and prevent any damage related to insufficient water circulation, ensuring reliable and responsive management of your cultivation environment.

Question 20

Is it possible to use the Bluelab lock box with compact greenhouse micro spaces?

Accepted Answer

The Bluelab lock and alarm external enclosure is designed to integrate with horticultural systems via standard connections, making it compatible with greenhouses of all sizes, including compact micro greenhouse spaces. Its locking and alarm functionality enhances the security of your setup even in a tight space.However, it is advisable to check the available space for the physical installation of the enclosure to ensure optimal integration and access to associated Bluelab sensors and controllers.

Product successfully added to your shopping cart

There are 0 items in your cart. There is 1 item in your cart.

Bluelab external locking and alarm box

Bluelab external locking and alarm box

Présentation du produit

Features

Comments All reviews

Summary

Your questions about this product

Exchange under 14 days

Free delivery from 100€*

Delivery in Europe

Payment secured

Facilities of payment

Best prices guaranteed

Guarantee GrowLED

GrowLED Sponsorship

Bluelab external locking and alarm box

Présentation du produit

Features

Customer reviews

Comments All reviews

Summary

Product questions

Your questions about this product

Derniers produits vus

Related articles