The 1-cell ultrasonic mist maker from Rodwin Electronics is ideal for diffusing dry mist in a cultivation space. You will provide your plants with an adequate environment to grow. It will maintain a fairly cool temperature as well as an ideal humidity level.

The flow rate of the ultrasonic fogger is 80 to 90mL per hour . Use it at a depth of 5 to 6cm of water.

Its operation is simple and effective, the ceramic cell vibrates at very high frequency (3 times the speed of sound) and thus agitates the water molecules. Less than 5 microns, these molecules will then transform into mist. The dry mist will not wet the leaves, thus avoiding excess water and the arrival of diseases, fungi, etc.

Using the ultrasonic fogger

The mister was not designed to operate continuously, but rather in intermittent bursts . We therefore recommend using a timer on a cycle of 15 minutes on then 15 minutes off.

• Fill the tank with water, ensuring that it always remains clean
• Make sure the water remains between 5°C and 40°C
• The perfect water level is 10mm above the detection probe
• Use a container large enough not to risk splashing outside of it.
• Do not use abrasive products to clean your Mist Maker
• Do not expose the transformer to moisture