Expert LED horticole depuis 2009 +50 000 commandes livrées Note boutique 4,7/5 · 1 766 avis King-Avis SAV horticole français
Catalog

Extraction & Processing

3 products

Solventless extraction: four processes, two shared criteria

Professional extraction equipment is judged on two quantities: the mass yield obtained on your own raw material, and the maximum temperature the product experienced during the process. Everything else follows from those.

This section covers mechanical separation and concentration processes applied to plant material: hops, perfume, aromatic and medicinal plants, spices, hemp of approved varieties, oleoresins.

Four routes, four logics

  • Heat pressing: presses with temperature-controlled plates, where effective pressure and temperature jointly govern the result.
  • Ice water separation: a wet, cold route, by agitation followed by filtration through graded meshes.
  • Dry sifting: separation of a size fraction on very cold material.
  • Freeze drying: strictly speaking a drying step by sublimation under vacuum, downstream of a wet extraction.

Out of scope: extraction with volatile solvents, which falls under regulated installations and an ATEX framework.

What can genuinely be compared from one machine to another

  • Mass yield and selectivity: the ability to isolate the target fraction rather than carry everything over.
  • Thermal integrity: maximum temperature seen by the product, exposure time, any local hot spot.
  • Capacity and cycle time: it is their product, and not capacity alone, that gives a daily throughput.
  • Hygiene and conformity: ability to be dismantled, documented food-contact suitability, CE marking, an instruction manual in the language of the country of use.

Why no yield figures are published here

The yield of a mechanical process depends entirely on the raw material: species, cultivar, moisture content, freshness, drying conditions. A figure quoted by a manufacturer describes their trial, not your production. The only reliable approach is a trial on your own material, with input and output weighed.

Where to go next

The quality of the incoming material governs everything, and it is decided upstream, in harvest and drying. Site equipment is listed in our professional range and, for non-professional use, a few accessories remain in the after-harvest section.

Showing 1-3 of 3 1/1
Satisfait ou remboursé
14 jours
Retour 14 jours
Frais de retour à votre charge
SAV expert FR
Conseil horticole
Paiement en 3, 4 ou 10 fois
Sans frais par CB