Question 1

Does this digital programmer support synchronization via DMX or another protocol to coordinate its programs with a luminous plant scenography installation in rhythm with music?

Accepted Answer

The weekly digital DIN rail programmer with 8 programs does not include synchronization via the DMX protocol or other communication protocols for rhythmically and synchronously managing with music. It is designed for simple time programming and is not suitable for complex light scenographies requiring real-time control.

Question 2

How much does this digital programmer consume in standby? This is important for eco-responsible use in automatic mode.

Accepted Answer

The standby consumption of the Weekly Digital Programmer for DIN rail mounting is not specifically indicated. In general, this type of programmer consumes about 0.4 W in standby mode, which remains very low and compatible with eco-responsible use in automatic mode. This minimal consumption level allows for effective management of your lighting cycles without significant energy impact.

Question 3

Can cycles be programmed with a resolution of less than 15 minutes on this digital timer to optimize the operation of sensitive loads in g/Watt?

Accepted Answer

This weekly digital timer for DIN rail generally offers a resolution of 15 minutes for its cycles. It is not clearly stated that it can handle intervals less than 15 minutes, which is often the case with this type of device. For very precise control of sensitive loads in g/Watt, requiring finer resolution, it may be preferable to opt for a model offering minute-by-minute programming.

Question 4

Does this digital programmer for DIN rail guarantee long-term reliability, particularly regarding the retention of weekly schedules without loss or delay after several months of continuous use?

Accepted Answer

The Weekly Digital Programmer for DIN rail generally offers excellent long-term reliability. Thanks to its integrated backup power supply, it ensures the precise retention of programs even in case of a power outage, thus avoiding any loss or delay over months of continuous use. These devices, designed for professional use and permanent installation, guarantee optimal stability of programmed schedules under normal usage conditions.

Question 5

Ok great this programmer for light management. Can you tell me if we can program hyper short cycles, like every 5 minutes, to optimize the lighting on my indoor crops? That would be great to maximize growth!

Accepted Answer

The Weekly Digital Timer that you mentioned is ideal for standard schedules with 8 programs, but it is not designed to handle cycles as short as every 5 minutes. For hyper short cycles and very precise lighting management, a multifunction timer with a wider range of settings, including intervals from a few seconds to several hours, will be more suitable.

Question 6

Hello, this digital programmer with 8 programs and multiple repetition options seems very complete. For a differentiated management of growth and flowering, is it possible to program distinct cycles on this model to automate different lighting and watering systems according to the plants' phase?

Accepted Answer

Hello, this Weekly Digital Programmer indeed offers the possibility to create up to 8 independent programs with customizable time slots and repetitions. This allows you to manage the lighting and watering cycles distinctly according to the growth and flowering phases.

Question 7

What is the minimum cycle precision that this digital timer can manage for horticultural applications requiring very fine control of lighting periods?

Accepted Answer

The digital timer "Weekly Digital Programmer" offers a minimum cycle precision of 1 minute, with a drift of about 1 second per day. This precision allows for very fine control of lighting periods, perfectly suited to the demanding needs of horticultural cultivation under LED.

Question 8

Does this digital programmer retain settings in case of power failure, or does everything need to be reprogrammed after each interruption?

Accepted Answer

The Weekly Digital Programmer is generally designed to retain settings even in case of power failure, thanks to a built-in backup battery. This avoids the need to reprogram everything after each interruption. However, as all models may vary, it is advisable to check the product manual for precise confirmation.

Question 9

Compatible with low-power LED loads or only conventional resistive and inductive loads?

Accepted Answer

The Weekly Digital Programmer - For mounting on Din RAIL - 8 Programs is primarily designed for conventional resistive and inductive loads, such as standard resistors or motors. Its compatibility with low-power LED loads is not explicitly guaranteed, as these electronic loads may require specific or solid-state relays suited for their low consumption.Therefore, to control low-power horticultural LED lighting, it is recommended to use this programmer with a compatible intermediate relay, to ensure reliable and safe operation.

Question 10

What precision for weekly programming is offered with this DIN rail timer, especially for adjusting cycles in a compact micro culture?

Accepted Answer

The Weekly Digital Programmer – for Mounting on DIN Rail – 8 Programs offers high precision for weekly programming, ideal for compact micro-culturing. It allows you to configure up to 8 independent programs, each adjustable within specific time ranges with 15 different repetition options per program. This flexibility allows you to finely adjust lighting or watering cycles, with a time resolution generally to the minute, although this point is not explicitly stated. Thus, you can set up cycles that repeat at specific days and times, or according to a custom pattern (multiple times a day, only on certain days, etc.), ensuring optimal control in a restricted space.

Question 11

Can the timer be programmed to independently manage multiple watering phases in a typical week with different cycles each day?

Accepted Answer

The Weekly Digital Timer for DIN Rail offers 8 adjustable programs, which provides good flexibility for managing multiple watering phases throughout the week. You can program different cycles according to the days, but the independent management of multiple phases in parallel depends on its ability to control several outputs or distinct circuits. Generally, this type of timer is designed for a single circuit, so for multiple zones or phases, multiple devices or a specific multi-output model are often required.

Question 12

Can this digital programmer be synchronized with other timers to simultaneously manage two different circuits on a DIN rail without losing precision in the timing of on and off schedules?

Accepted Answer

The Weekly Digital Programmer for DIN Rail Mounting with 8 Programs operates autonomously without the functionality of automatic synchronization with other timers. Each device has its own cycle and its accuracy depends on its internal clock, which may lead to slight drift if you use multiple programmers on different circuits. For perfect synchronization of on and off schedules across two circuits, the most reliable solution is to use a single programmer controlling a contactor that will supply both circuits simultaneously. Otherwise, each programmer must be manually set to the same time ranges, accepting a possible drift over time. This approach ensures the best precision for managing your indoor LED installations and fully enjoying your growing cycles.

Question 13

Can this weekly digital timer be synchronized with an existing home automation system to manage two growing cycles in parallel?

Accepted Answer

This weekly digital timer, designed for DIN rail installation with 8 programs, does not appear to be equipped with communication features compatible with standard home automation systems (KNX, Z-Wave, Zigbee). Therefore, it cannot be synchronized directly with a home automation solution to manage two growing cycles in parallel. For simultaneous and automated management of multiple cycles via home automation, it is advisable to opt for a smart controller or timer compatible with home automation protocols and possibly controllable remotely. If you wish, I can help you choose suitable equipment for advanced multi-cycle management.

Question 14

What is the maximum precision of the programmer for simultaneous use with two different cultivation cycles in order to optimize lighting and standby periods?

Accepted Answer

The weekly digital timer for DIN rail, with its 8 programs, allows for the simultaneous management of up to two distinct cultivation cycles. Its maximum precision is generally accurate to the minute, which is perfectly suited to optimize lighting and standby periods in indoor horticulture.This precision allows for fine control of light/rest alternations, promoting harmonious growth and optimal energy efficiency. For higher precision requirements (beyond the minute), it would be necessary to turn to more advanced timers, but in most classic horticultural cases, this precision is more than sufficient.

Question 15

What is the actual energy efficiency of this digital timer in continuous use given its consumption of 4.4 W and how to optimize its programming to minimize overall electricity consumption over a week?

Accepted Answer

The weekly digital timer consumes a very low power in continuous use, normally between 0.4 W and 1 W. The mentioned consumption of 4.4 W seems to correspond to a brief active consumption (during switching) or the total associated load, as a simple timer usually does not exceed 1 W in constant operation. Over a week, this consumption amounts to approximately 0.07 kWh, which is negligible. The real lever for saving energy is to optimize the programming of the controlled device: Use the 8 time slots to precisely align the activation periods with your actual needs, thus avoiding any unnecessary operation. Avoid overlapping time slots to prevent overloading consumption. Schedule the load only when necessary (for example, lighting in the absence of natural light). Take advantage of weekly repetition options to finely automate the turning on and off. If the time resolution allows, refine with short intervals for more precision. In summary, the timer adds a marginal, almost negligible consumption, while its key role is to optimize the use of the connected equipment, which helps minimize overall electricity consumption over the week.

Question 16

What is the minimum configurable cycle time on this weekly digital programmer for DIN rail mounting to optimize management in automatic mode without energy loss?

Accepted Answer

The Weekly Digital Programmer - For mounting on Din RAIL - 8 Programs allows for weekly programming with 8 adjustable time slots, but the minimum cycle time is not explicitly stated in its documentation. In general, for this type of DIN rail-mounted programmers, the minimum configurable cycle is often around 1 minute, with some advanced models going down to 0.1 seconds. This offers excellent flexibility to optimize automatic management and minimize unnecessary energy consumption. To make the most of this programmer, it is therefore recommended to use the finest configuration possible among its 8 programs and 15 repeat options, referring to the manual to validate the precise setting.

Question 17

Does this programmer support an 8A inductive load like a pump or fan for continuous use without risk of overheating or rapid wear?

Accepted Answer

The weekly digital programmer for DIN rail with 8 programs, as you describe, is suitable for controlling resistive loads, but handling an inductive load like a pump or fan of 8A in continuous use requires caution. Indeed, inductive loads generate voltage spikes and significant inrush currents during each switching operation, which can lead to rapid wear or even overheating of the contacts if the programmer is not specifically designed for it. Generally, a standard programmer can handle an inductive load lower than its rated resistive load, and in continuous use, this increases the risk. Our passionate advice: to preserve your equipment and ensure a long lifespan, it is highly recommended to use a relay or contactor suitable for the 8A inductive load, controlled by this programmer. This relieves the contacts of the programmer and ensures optimal and safe operation. If you would like a more precise opinion, please feel free to provide us with the exact reference of the programmer so we can examine its detailed technical characteristics.

Question 18

Does this digital timer support a continuous inductive load of 8A in daily use without any issues, or does it trip the protections when used regularly?

Accepted Answer

The weekly digital timer for DIN rail perfectly supports a continuous inductive load of up to 8A at 230 V with a power factor of 0.4. This capability is well suited for daily use without the risk of tripping the protections or damaging the device. This model is specifically designed for this type of inductive load, even integrating a backup battery to ensure optimal reliability. You can thus use it confidently with an 8A inductive load, without fearing unexpected trips. It is truly an excellent choice for precise and reliable management of your equipment.

Question 19

Is integration possible with voice assistants like Alexa or Google Home for remote control?

Accepted Answer

The Weekly Digital Timer - For DIN Rail Mounting - 8 Programs is a classic model operating autonomously, without WiFi or Bluetooth connectivity. Therefore, it does not allow direct integration with voice assistants like Alexa or Google Home for remote control. To benefit from voice control, it is necessary to choose a timer or a connected socket specifically compatible with these systems. These devices, often referred to as "smart" or "WiFi", allow remote management via application and voice assistant.

Question 20

Can independent programs be configured for each day of the week to optimize the management of two crops in parallel on this DIN rail programmer?

Accepted Answer

Yes, the Weekly Digital Programmer for DIN Rail allows you to configure up to 8 independent programs, each customizable with specific time ranges and repetition options that precisely target the days of the week. This means you can perfectly organize different programs for each day or group days according to your needs, which is ideal for simultaneously managing two crops with distinct cycles. This flexibility ensures precise and tailored control of your lighting or other equipment, thus optimizing your indoor crops.

Type	Digital
Compatibilité	Tableaux électriques standards, éclairages LED/HPS, ventilateurs, pompes d'arrosage, chauffages
Alimentation	220-250 VAC 50Hz
Durée d'action estimée	Batterie de sauvegarde (NiMH ou lithium 1.2V)
Installation	Montage rail DIN
Nombre de programmes	8
Charge max (W)	3680
Duree min. programme	1 minute

Product successfully added to your shopping cart

There are 0 items in your cart. There is 1 item in your cart.

Weekly Digital Programmer - For mounting on Din RAIL - 8 Programs

Présentation du produit

Caractéristiques détaillées

Comments All reviews

Summary

Your questions about this product

Exchange under 14 days

Free delivery from 100€*

Delivery in Europe

Payment secured

Facilities of payment

Best prices guaranteed

Guarantee GrowLED

GrowLED Sponsorship

Weekly Digital Programmer - For mounting on Din RAIL - 8 Programs

Présentation du produit

Caractéristiques détaillées

Customer reviews

Comments All reviews

Summary

Product questions

Your questions about this product

Derniers produits vus