Solux Under Canopy LED — 2 × 120 W with feet

Two bars with feet to light below the canopy

The Solux Under Canopy LED brings supplemental light to the lower parts of your plants. This set contains two 120 W bars, 240 W in total, with their support feet. It supplements the main grow light above the crop, placing another light source closer to shaded foliage.

A layout that suits your growing rows

The 25 cm stands allow placement on a stable surface beneath the plants. Arrange the two fixtures in parallel or plan a line to suit your growing layout. Each bar has a built-in driver, so no additional external power supply is needed for normal operation.

Allow approximately 1.20 m of length per bar: the drawing in the manual shows 1,195 mm. The profile section is 82 × 72 mm; account for the 25 cm stands when planning mounting height. Leave space for connectors, cables and access to your plants.

Efficient, adjustable supplemental lighting

Solux states an efficacy of 2.7 µmol/J at 220 V and a PPF of 324 µmol/s per bar. The 120° beam spreads light around the fixture. The aluminium housing and passive cooling dissipate heat without a fan. IP65 protection is suitable for dusty growing environments and water splashes.

A compatible 0–10 V controller, supplied separately, adjusts intensity. Adapt positioning and output to foliage density and your light measurements. Choose this supplemental light according to your existing main lighting and the areas you want to reach.

Specifications to compare

What is included?

• 2 Solux Under Canopy LED fixtures, 120 W each, with built-in drivers.
• 25 cm floor support feet for both bars.
• The manufacturer's power connection with European plug.
• Interconnection clips.

The single-bar detail image shows one component of the set. This offer contains two bars. An external 0–10 V controller is not included.

Daisy chains and measurement conditions

The manual allows daisy chains of up to 15 bars at 240 V, using compatible connections and within the electrical installation's limits. This number refers to individual bars. Follow the manual's wiring instructions and disconnect power before handling the equipment.

The manufacturer reports a test with one 120 W bar at a distance of 45 cm over a 0.9 × 1.2 m area, with an average of 175 µmol/m²/s. These test conditions provide a comparison point. Your plant layout and main grow light determine the appropriate settings.

Frequently asked questions

Does the price cover one or two bars?

The displayed price covers two 120 W bars with their stands, giving a total nominal power of 240 W.

Are the feet included?

Yes. The 25 cm floor stands are included. Provide a stable surface and enough access to the connections.

Do I need an extra driver or controller?

The drivers are built into the bars. Dimming requires a compatible 0–10 V controller; an external controller is not supplied.

How much space should I allow?

Reserve approximately 1.20 m of length per bar, plus room for cables and stands. The drawing in the manual gives a length of 1,195 mm.

Manual and supplemental lighting options

Download the multilingual Solux manual — English from page 2.

Explore under canopy and interlighting equipment, supplemental grow lights and the Solux range to plan your installation.