Question 1

This Spot LED V4 100W lamp seems very promising. How long should I leave it on each day for optimal growth of my Phalaenopsis orchids, and will this lamp be as effective for 20 plants?

Accepted Answer

The Spot LED V4 100W is indeed an excellent choice for the growth of your Phalaenopsis orchids. For optimal growth, I would recommend lighting your orchids between 12 and 14 hours a day, thus simulating natural light conditions. In terms of effectiveness for a score of plants, this depends on a few variables such as your plant arrangement, the distance between the lamp post and your plants, and the specific light intensity needs of your orchids. The light intensity of this lamp can quite agree for such a number, provided that the installation is well thought out. Remember to monitor your orchids' reaction to the lighting to optimize your setup. If you notice leaves becoming darker or lack of blooming, this may indicate that they are not getting enough light. Conversely, if their leaves turn yellow or take on a reddish hue, they are perhaps exposed to too much light intensity. I hope this information will be useful to you. Happy cultivation!

Question 2

Can the 100W V4 IP66 spotlight be used in a humid interior such as a bathroom for a 150x200cm living wall without natural light?

Accepted Answer

The 100W V4 LED Spotlight - IP66 is perfectly suited for a living wall in a humid interior like a bathroom. Thanks to its IP66 protection rating, it effectively withstands humidity and water splashes, ensuring durability in such an environment. Designed specifically for living walls, it provides intense and well-balanced light, conducive to plant growth in the absence of natural light. Its 100W power is sufficient to cover an area of approximately 150x200 cm, offering uniform lighting. One important point to check is the ambient temperature of your bathroom to avoid any risk of overheating. Aside from that, this spotlight is an excellent choice for keeping your green plants thriving in a humid and confined atmosphere.

Question 3

100W LED spotlight with Philips LEDs and Mean Well power supply, what is the real gain in energy savings compared to traditional halogen lighting for a green wall?

Accepted Answer

The 100W LED spotlight equipped with Philips LEDs and a Mean Well power supply, such as the "LED-Strahler V4 100W" model, offers a real energy saving of approximately 60 to 70 % compared to traditional halogen lighting for a green wall. This is explained by a significantly higher luminous efficacy (130-150 lm/W compared to less than 20 lm/W for halogen) and an optimized power supply that reduces energy losses. In practice, for the same level of illumination, a halogen consumes about 300W, which is three times more than this LED spotlight. Additionally, it has a much longer lifespan (up to 50,000 hours), reducing maintenance costs and efforts. If you want efficient and economical lighting for your green wall, this type of LED spotlight is a technical and sustainable choice.

Question 4

What is the exact luminous power in lumens and the precise spectrum emitted by this 100W LED spotlight to optimize growth without producing too much heat on a 2m high plant wall?

Accepted Answer

The LED spotlight V4 100W uses Philips LEDs that provide a spectrum of white light close to natural light, ideal for the growth of green plants and plant walls. The exact luminous power in lumens is not specified, but this 100W spotlight is designed to deliver efficient light intensity while limiting heat production thanks to LED technology and a MeanWell driver. For a 2-meter high plant wall, it is likely that multiple spots will be needed to ensure uniform and optimal light coverage without overheating. This IP66 lamp is therefore suitable for installation indoors with good thermal management and light efficiency adapted to this type of cultivation.

Question 5

Perfect spot for indoor plant wall, can you combine several spots for a larger surface without losing power?

Accepted Answer

The LED Spot V4 100W is perfectly suitable for illuminating an indoor plant wall. You can install several spots side by side to cover a larger area. Each spot will operate at its full power of 100W, without any intrinsic loss related to their combination, provided that the power supply is adequately sized. However, there is no smart coupling system between these spots; thus, the uniform distribution of light will depend on their placement and orientation on your wall.

Question 6

real electrical consumption of LED spot v4 100w compared to halogen luminous efficiency per watt in green wall 1.5x1.5m height conditions 80cm with and without natural light ip66 lifespan impact profitability EDF

Accepted Answer

The LED spot V4 100W actually consumes about 100 W, corresponding to its nominal power. Compared to an equivalent halogen spotlight, it offers a much higher luminous efficiency (~100 lm/W compared to 10-20 lm/W for halogen), which means better energy efficiency. For a green wall of 1.5 x 1.5 m at a height of 80 cm, this LED projector perfectly covers the surface without excessive intensity, even in the absence of natural light. With natural light, the illuminated area can extend further while reducing energy consumption. The lifespan of the LED V4 is exceptional, around 50,000 hours, much higher than the 1,000-2,000 hours of a halogen, limiting maintenance needs. In terms of profitability, the electricity savings are significant: about 365 kWh/year (70-90 €) compared to 1,600-2,400 kWh/year (300-600 €) for a halogen, quickly amortizing the investment. In summary, this LED spotlight offers an excellent performance-to-consumption ratio and remarkable durability, perfectly suited for an indoor green wall, with or without natural light, while ensuring a good return on energy investment.

Question 7

LED spotlight 100W rated for a maximum height of 200cm without natural light, is it possible to position it closer than 80cm from the plant wall to optimize the space on a small wall?

Accepted Answer

It is quite possible to position the LED spotlight V4 100W less than 80cm from a plant wall to optimize a small space, but it is essential to monitor the temperature and health of the plants. Thanks to its passive heat management system, the lamp heats up little, which limits the risk of burning. However, start at 80cm and gradually adjust based on the foliage's reaction to ensure even light without thermal stress.

Question 8

What is the precise color temperature of this 100W V4 spotlight and its impact on the growth of green plants compared to a full-spectrum horticultural light?

Accepted Answer

The LED spotlight V4 100W uses Philips LEDs that provide a white light spectrum close to natural light, but the precise color temperature is not specified by the manufacturer. This white spectrum is excellent for the general development of green plants and green walls, as it replicates natural lighting well. However, compared to a full-spectrum horticultural light, which incorporates specific wavelengths in blue and red that are essential for leaf growth, flowering, and fruiting, this spotlight may be slightly less targeted for certain advanced developmental phases. In summary, this projector is well-suited for healthy growth of indoor green plants, but for more specific needs, a full-spectrum horticultural lighting could offer better control and performance.

Question 9

What is the difference in light penetration of the LED Spot V4 100W compared to traditional horticultural lighting for vertical gardens over 2 meters high?

Accepted Answer

The LED Spot V4 100W differs from traditional horticultural lighting by having a much greater light penetration into vertical gardens over 2 meters high. Thanks to its 100 high-efficiency Philips LEDs, its light spectrum optimized for photosynthesis, and its focused beam, it delivers intense and stable light that better penetrates the foliage throughout the height.

Question 10

What is the exact luminous output in lumens of the LED Spot V4 100W, and how does it translate in terms of optimal indoor plant growth without natural light?

Accepted Answer

The LED Spot V4 100W uses Philips LEDs with a white spectrum close to natural light, ideal for indoor plant growth. Although the exact luminous flux is not specified, this type of 100W LED spot generally delivers around 10,000 lumens, thanks to efficient technology and a reliable MeanWell driver. This luminous power combined with an appropriate spectrum covers the essential wavelengths for photosynthesis, especially blue and red, which promotes healthy growth of green plants and vertical gardens. For optimal cultivation without natural light, it is important to ensure good distribution of the spots to avoid shadow areas and guarantee uniform illumination on the targeted surface. In summary, this 100W LED spot provides effective lighting to stimulate indoor photosynthesis, provided that the positioning and number of lamps are suited to the size and density of your planting.

Question 11

What is the average electric consumption of the 100W LED spot in continuous operation, and is there a thermal regulation system to prevent overheating in a humid environment?

Accepted Answer

The 100W V4 LED spot consumes a stable power of 100 watts in continuous operation, which is about 36 kWh for 12 hours of lighting per day over a month. For thermal regulation, this model uses passive cooling, without a fan, which dissipates heat through convection and conduction via its structure. This silent system is perfectly suited for humid environments. Additionally, with an IP66 protection rating, the spot is solid against humidity and water splashes, greatly reducing the risk of overheating even in humid or outdoor conditions.

Question 12

What is the luminous power in lumens and the precise light spectrum of this 100w LED spotlight to optimize the growth and flowering of plants in a green wall?

Accepted Answer

The LED spotlight V4 100W emits an estimated luminous power between 10,000 and 14,000 lumens, although the manufacturer does not provide a precise value. Equipped with high-end Philips LEDs, it delivers a horticultural white spectrum of about 4000K, close to natural light.This spectrum is ideal for the development of green plants and growth in green walls, but is not specifically optimized for flowering, which often requires a stronger proportion of red. To effectively cover a green wall taller than 2 meters or a wider area, multiple spotlights will be necessary to ensure homogeneous diffusion.If you are looking for LED lighting with a spectrum clearly adjusted for flowering, we have other suitable panels that I can recommend.

Functions	Not Dimmable
Waterproof	Yes
LEDs	Phillips
Lens angle	100°
Plug & Play	No
Dimensions (cm)	402mm x 295mm x 60mm
Format	Spot LED
Surface de culture (m²)	Jusqu'à 60x60
Puissance consommée (W)	100W
Marque des LED	Philips
Équivalence HPS/MH (W)	\|
Silencieux (zéro bruit)	Oui
Type de LED	LED
Compatibilité	Secteur ou timers standards
Alimentation	MeanWell
Durée d'action estimée	50 000H

Product successfully added to your shopping cart

There are 0 items in your cart. There is 1 item in your cart.

LED spotlight V4 100W - Lamp for green plants and green walls - IP66 - GreenVisuaLED

Points forts

LEDs

Étanche

Présentation du produit

This spot is ideal for a green wall:

Caractéristiques détaillées

Comments All reviews

Summary

Your questions about this product

Exchange under 14 days

Free delivery from 100€*

Delivery in Europe

Payment secured

Facilities of payment

Best prices guaranteed

Guarantee GrowLED

GrowLED Sponsorship