01 — Description
Présentation du produit
The Mist Maker 5-head Ultrasonic Mist is perfect for providing a good level of humidity in your growing space.
Its ceramic cell shakes at 3 times the speed of sound to produce mist in your space.
Using advice :
For a longer lifespan, we advise you to use demineralized water or rainwater. We also recommend using a buoy to obtain optimal efficiency as well as an anti-splash.
03 — Avis clients
Customer reviews
Comments All reviews
Brumisateur easy à installer, le volume d’humidité est nickel sans bruit gênant. Petit prix pour une bonne efficacité, ça fait le taf sans se casser la tête. Emballage soigné, reçu vite. RAS pour l’instant.
Recommended to buy: Yes
Qualité
Ça plaît beaucoup.
Recommended to buy: Yes
Impeccable
Parfait, rien à dire.
Recommended to buy: Yes
Correct. Fonctionne bien
Correct. Fonctionne bien, mais j'aurais aimé plus de détails dans la notice. Sinon, ça fait le travail.
Recommended to buy: Yes
C'est un très
C'est un très bon produit. Efficace et facile à utiliser. Pas déçu du tout.
Recommended to buy: Yes
04 — Questions sur ce produit
Product questions
Your questions about this product
- What is the mist output in liters per hour for the mist maker with 5 heads and what maximum volume can it effectively humidify?
The ultrasonic mist maker with five heads delivers a mist with an output of about 0.5 liters per hour, which can vary from 0.4 to 1.2 liters depending on conditions, especially the presence of ventilation.
It is designed to effectively humidify indoor growing spaces, with no strict maximum volume, as effectiveness will depend largely on ventilation and the area to cover. To optimize diffusion, it is advised to use a fan to evenly distribute the mist in the air.
In practice, you choose the water tank capacity according to your needs, with the mist maker operating with a floating ball in this tank.
- Is the Mist Maker 5 heads compatible with a bright LED SCROG space to maintain a stable humidity level without the risk of excessive condensation?
The Mist Maker Ultrasonic Fogger - 5 Heads is perfectly suited to increase and stabilize humidity levels in a SCROG space under LED lighting. Its capacity to produce between 1600 and 1900 ml of fog per hour is well-suited for medium to large growing volumes, typical of a SCROG tent.
However, to avoid excessive condensation, it is essential to integrate effective ventilation and a constant air exchange. LEDs emit little heat, which reduces the risk of condensation on hot surfaces, but excess humidity without proper ventilation can create problems. Using a hygrostat coupled with automatic ventilation will help maintain an optimal balance.
In summary, with good air management, this ultrasonic fogger is an excellent ally for controlling humidity in your LED-lit SCROG space.
- Does this Mist Maker have a system to adjust the intensity of the mist, or does it only operate at full power?
The Mist Maker Ultrasonic Mist Device – 5 Heads operates only at full power. It does not have a system to adjust the intensity or modulate the amount of mist produced. The 5 ultrasonic heads ensure a constant and fine production of approximately 1500 ml of mist per hour, without the possibility of adjusting this flow.
- What is the misting capacity in m2 per head for this Mist Maker 5?
For the Mist Maker Ultrasound Fogger – 5 heads, the fog production is about 0.5 liters per hour for all 5 heads, which is about 0.1 liters per hour per head. However, there is no precise data regarding the area in m² covered per head, as this capacity strongly depends on ambient conditions (ventilation, humidity, air circulation).
In practice, this device is suitable for effectively humidifying small to medium indoor spaces, such as terrariums or corners dedicated to cultivation under LED lighting. For even distribution, it is advised to use a supplementary fan.
If you are looking to optimize humidity management in your space, also consider checking our range of ventilation systems to improve air circulation and fog distribution.
- What is the electric consumption in watts of the Mist Maker 5 heads and its mist output in ml/h to estimate the yield in g/watt?The ultrasonic mist maker Mist Maker - 5 Heads diffuses up to 1500 ml of mist per hour. Regarding the electric consumption, it is not precisely stated in watts, but it is estimated to consume about 100 watts per hour. This allows estimating a yield of about 15 ml of mist per watt. This value remains indicative, as the exact consumption can vary depending on the usage conditions.
- Can the ultrasonic fogger with 5 heads operate continuously without risk of overheating or degradation of the ceramic cell?
The Mist Maker Ultrasonic Fogger - 5 Heads is designed to operate continuously without immediate risk of overheating, thanks to its robust ultrasonic ceramic cell. To ensure a long lifespan (up to 5000 hours), it is essential to use demineralized or rainwater to avoid mineral deposits that could damage the cell.
Proper maintenance and a well-ventilated environment also help prevent any degradation or overheating. Thus, under good conditions, this fogger can support continuous operation without issues.
- What is the maximum area that this ultrasonic mist maker with 5 heads can effectively cover to maintain a stable humidity level in indoor cultivation?
The ultrasonic mist maker with 5 heads disperses a fine, cool mist that is ideal for maintaining stable humidity in indoor cultivation. Its capacity of about 0.4 to 1.2 liters per hour allows it to effectively cover medium to large volumes, but the exact area depends heavily on the ventilation and layout of your space.
To optimize its effectiveness, a ventilation system is recommended to distribute humidity well and prevent localized condensation. Generally, this type of mist maker is well suited for cultivation rooms of several square meters, but adjustments should always be made according to your specific needs.
- What is the power consumption of this mist maker and is it possible to adjust the intensity of the mist to limit the noise generated?The Ultrasonic Mist Maker - 5 Heads consumes approximately 100 watts per hour, which is quite energy-efficient for significant mist production. Regarding the regulation of the mist intensity, this model does not have an integrated adjustment. However, it is sometimes possible to add an external dimmer to adjust the power and thus reduce the noise, but this is not officially planned or guaranteed for this product.
- Do the 5 heads of the Mist Maker ensure uniform and stable mist diffusion over several months without a drop in performance?
The ultrasonic mist maker Mist Maker - 5 Heads offers powerful diffusion and a very fine mist thanks to its five heads, promoting good moisture distribution. However, the stability and uniformity of the diffusion over several months depend not only on the number of heads but especially on the quality of the water used (preferably demineralized or rainwater), as well as regular maintenance of the heads.
Without appropriate monitoring and maintenance, performance may decrease. To ensure effective and lasting diffusion, also consider using a fan to properly distribute the mist in your growing space.
- What misting rate can be expected with this Mist Maker 5 heads in a 1m³ growing space and how to adjust it to avoid excess humidity?
The Mist Maker Ultrasonic Mist Device – 5 heads generates a fine mist of about 1.5 to 1.6 liters of water per hour, which rapidly increases the relative humidity in a growing space of approximately 1 m³.
To avoid excess humidity, it is essential to regulate its operation, ideally in intermittent mode, for example, 1 minute of misting every 5 to 10 minutes depending on the hygrometric conditions. Using a humidistat or a timer allows for effective control to maintain a stable humidity level.
Finally, good ventilation of the growing tent and precise dosing of the water volume in the device (with a recommended distance of 30 to 50 mm between the water surface and the membranes) are essential for optimal operation without the risk of condensation.
- Ultrasonic mist maker 5 heads: Can multiple units be combined without the risk of over-humidification in a 1x1 box under LED?
For a 1x1 m growing box under LED, a 5 head ultrasonic mist maker is generally sufficient to increase humidity without the risk of runoff or mold, thanks to its fine misting of about 1.5 liters of water per hour.
Combining multiple units in such a small space can quickly lead to over-humidification, which promotes mold formation or an environment that is too humid for plants. It is therefore important to carefully monitor humidity using a hygrometer and ensure good ventilation.
If you want to optimize humidity, also consider using demineralized water and installing the mist makers with suitable floats to ensure effective misting without direct contact with the plants.
In summary, a single 5 head mist maker is ideal for this size of box; multiple units require very careful climate management to avoid any issues.
- Can we independently regulate the intensity or frequency of mist production on this 5-head Mist Maker to optimize humidity according to the growth stage under LED?
The Ultrasonic Mist Maker - 5 Heads does not allow for independent adjustment of mist production intensity or frequency, whether for each head or overall. Its ultrasonic technology operates at a fixed frequency, generating a constant output of about 1500 ml/h without available modulation.
To adjust humidity according to your needs and growth stages under LED, you will need to control the duration of usage (turning on/off) rather than through automatic mist variation. For more precise control, you may pair this mist maker with a timer or an external humidity controller.
- mist maker 5 heads easy to maintain and suitable for an 80x80 box? how long can it run without pause?
The Mist Maker Ultrasonic Fogger - 5 Heads is perfectly suited for a 80x80 cm grow box, providing a good level of humidity with its production of approximately 0.5 liters of mist per hour. It is easy to maintain by using demineralized or rainwater, and its ceramic plates are replaceable.
Regarding operation, it can run for several hours without pause as long as the water level is always kept above the plates (30-50 mm) to prevent overheating. However, it is recommended to use it in cycles to prolong its lifespan and optimize its performance.
For better distribution of mist in your space, a fan is an ideal addition.
- Is the mist maker with 5 heads compatible with aquariums and closed greenhouses or only with greenhouses?
The ultrasonic mist maker with 5 heads is perfectly suitable for both aquariums and closed greenhouses. It generates a fine mist that effectively increases humidity in these environments. It operates with a floating buoy in a water tank, ensuring optimal diffusion.
To ensure its longevity, it is recommended to use demineralized or rainwater. However, be careful to monitor the temperature in aquariums, as the heat generated can cause issues in some cases, especially for planted aquariums.
In summary, this mist maker is versatile and suitable for your greenhouse and aquarium needs, provided that you adhere to the usage conditions (appropriate water, maintenance, and environmental control).
- What is the precise mist output per hour for the ultrasonic mist maker with 5 heads and how to optimize its integration into a LED SCROG system?
The Ultrasonic Mist Maker - 5 Heads produces mist at a rate of approximately 1.5 liters per hour, ensuring effective and continuous humidification.
To optimize its integration into a LED SCROG system, it is essential to use good quality water (ideally demineralized), to regularly clean the ultrasonic heads to avoid clogging, and to position the mist maker in a way that promotes homogeneous mist distribution through the canopy.
Pair it with a fan to well disperse the moisture without creating areas of high condensation and use a hygrometer to maintain an optimal humidity level around 60-70% during the vegetative phase. This precise control prevents any saturation and promotes harmonious growth of your plants under LED lighting.
- Can the humidity produced by each head of the Mist Maker 5 heads be adjusted independently to suit the needs of different crops in parallel?
The Mist Maker Ultrasonic - 5 Heads does not allow for independent adjustment of the humidity produced by each head. The mist is distributed consistently and uniformly across all 5 heads, with no individual control possible.
To meet different needs depending on the crops, multiple separate units or an external regulation system will need to be considered, as this model does not offer specific adjustments per head.
- What is the total power in Watts consumed by this 5-head mist maker and its efficiency in grams of humidity per Watt?
The Ultrasonic Mist Maker - 5 Heads consumes about 100 watts when running continuously. It produces between 1.5 and 1.6 liters of water per hour, which corresponds to about 1500 to 1600 grams of humidity per hour.
Its humidity efficiency is therefore around 15 grams of humidity per watt consumed, making it an excellent choice for quickly increasing humidity in a space of about 1 cubic meter.
