Agrolight

Agrolight LED Lighting: Spanish Technology for Your Crops

Agrolight stands out as one of the leading brands in LED lighting for indoor cultivation. For over 15 years, this Spanish company has been developing horticultural lighting solutions that combine luminous efficiency and robustness. Their LED panels integrate the latest advancements in light spectra and thermal dissipation.

Why choose Agrolight LED lighting?

Agrolight panels are distinguished by their optimized full-spectrum, which faithfully reproduces natural sunlight. With an efficiency of 2.8 µmol/J on their latest models, they far surpass traditional HPS while consuming 50% less energy. Agrolight's Quantum Board series uses Samsung LM301B diodes and Meanwell drivers, guaranteeing a lifespan of over 50,000 hours. Their passive cooling system keeps the LEDs at optimal temperature, even during intensive 18h/day operation.

The brand also offers panels with an integrated dimmer, allowing you to adjust light intensity according to growth phases. This flexibility prevents light stress for young plants while maximizing production during flowering. The Agrolight Orion, for example, offers a dimming range from 10% to 100%, ideal for accompanying your plants from germination to harvest.

How to choose your Agrolight lighting

The choice of an Agrolight panel primarily depends on the growing area and the type of plants cultivated. For a 60x60cm tent, a 150W panel is more than sufficient. 1x1m spaces require between 250W and 300W, while a 1.2x1.2m surface requires a minimum of 360W to achieve a homogeneous PPFD of 800-1000 µmol/m²/s.

Suspension height varies according to power: count 40-50cm for 150W models, and up to 60-80cm for 600W during flowering. Models with a dimmer offer more flexibility, allowing you to bring the panel closer while reducing intensity. Also check compatibility with your electrical installation: most Agrolight units operate on 220V with a standard plug.

Frequently Asked Questions

What Agrolight LED lighting power should I choose for my 1.2x1.2m tent?

For a 1.44m² tent, opt for a minimum 360W panel, ideally 480W if your budget allows. This power will give you a PPFD of 800-1000 µmol/m²/s, perfect for flowering. The Agrolight Orion 360W is particularly suitable for this surface, with its homogeneous light distribution. During growth, you can use the dimmer at 60-70% to avoid light stress. Don't forget to provide sufficient extraction as even LEDs generate heat.

How to install an Agrolight Orion 360W panel with its dimmer?

Installation is simple: first attach the suspension straps to your tent bars, then hang the panel at a minimum height of 60cm. Plug the driver into a standard 220V outlet – no external ballast needed. The dimmer connects directly to the driver via a supplied RJ11 cable. Set the intensity to 30% for seedlings, 60% for growth, and 100% for flowering. Ensure your extraction effectively removes heat, even though Orion units heat up little thanks to their aluminum heatsink.

What's the difference between Agrolight LEDs and HPS for indoor flowering?

Agrolight LEDs consume 50% less energy than an equivalent HPS while producing less heat. A 480W Agrolight panel easily replaces a 600W HPS with better light penetration thanks to the full-spectrum. HPS primarily emits in the red-orange, while Agrolight covers the entire spectrum from 380nm to 780nm. The result: denser buds, more developed trichomes, and reduced electricity consumption. The initial investment is higher, but the payback period is 12-18 months.

How to maintain Agrolight LED panels to extend their lifespan?

Maintenance is minimal but crucial: dust the heatsinks every 2-3 months with a dry brush or a low-power vacuum cleaner. Avoid water and chemicals that could damage electronic components. Regularly check that connections are tight and that the driver is not overheating. Maintain an ambient temperature below 30°C to preserve the Samsung diodes. With these simple precautions, your Agrolight units will function perfectly for over 10 years.

At what height should Agrolight Quantum Boards be suspended according to the growth phase?

During germination and the first few days, place the panel at 80-100cm with the dimmer at 20-30% to avoid burning young shoots. During growth, lower it to 60-70cm with 60-70% intensity to promote compact development. During flowering, set it to 40-50cm with 100% power to maximize bud density. These distances apply to 300-400W models – adjust according to your panel's power. Always monitor for signs of stress: leaves curling upwards = too close, excessive stretching = too far.