Product successfully added to your shopping cart
Ça pousse dans le bon sens
6 products
The Premium Pack 2023 represents the pinnacle of multi-tier indoor growing. Designed for demanding growers, this pack integrates professional components into an optimized 5-tier setup. With its 120x40x200cm Probox XL and intelligently distributed 450W of LED lighting, you achieve maximum yield in a compact footprint.
The difference from a standard pack? It's all in the technical details. The 420D Mylar lining offers 95% reflectivity, far superior to classic covers. The 450W of LEDs are distributed across 5 tiers with a full spectrum optimized for each growth phase. The Lumatek Zeus 600W PRO Complete Premium Pack - HomeBox Q120 perfectly illustrates this philosophy with its Zeus 600W LED delivering 2.7 µmol/J light efficiency.
The integrated extraction perfectly manages air renewal across all 5 levels. Unlike DIY systems, everything here is calculated: airflow, temperature, humidity. The PREMIUM ATTIS 300W Lumatek Complete Pack shows that you can start with professional equipment without breaking the bank.
First criterion: LED power per tier. Count on a minimum of 90W per level for decent results. The pack's 450W are therefore distributed at 90W per tier, which gives approximately 300 µmol/m²/s at plant level. This is perfect for growth, a little tight for intensive flowering.
Second crucial point: ventilation. The Probox XL includes pre-drilled ducts and an extractor sized to renew the air 40 times per hour. The SpectraWILD M650 Complete Premium Pack - HomeBOX Q120 goes further with reinforced extraction adapted to high-power LEDs.
Finally, look at modularity. Adjustable shelves allow you to adapt the height according to your plants. Some growers prefer 4 tall tiers rather than 5 cramped tiers. The Zeus 465 PRO Compact 2.9 Complete Premium Pack - HomeBOX Q100 offers this approach with fewer tiers but more vertical space.
With dimensions of 120x40cm per tier, you can grow 4 to 6 plants per level depending on the technique used. In SOG (Sea of Green), count 16 small plants per tier, or 80 plants in total. In SCROG or with larger plants, 3-4 plants per tier yield better results. The important thing is to maintain a minimum of 30cm between each plant for good air circulation.
Installation takes about 2 hours for two people. Start by assembling the metal structure without fully tightening the screws. Then install the 420D Mylar from bottom to top, avoiding creases. The shelves are fixed with special clips every 40cm in height. Finish with the pre-drilled extraction ducts and connect the LED lighting tier by tier.
Absolutely, that's its strong point. The 90W per tier is perfect for growth with a blue-rich spectrum. For flowering, you can concentrate your plants on 3-4 tiers and increase the light intensity. Some growers use the upper tiers for growth and the lower ones for flowering, creating a continuous cycle. The full spectrum of the LEDs allows for this versatility.
The 420D Mylar should be cleaned with a slightly damp microfiber cloth and mild soap, never alcohol, which could damage it. For metal shelves, use a soft brush and soapy water. Avoid abrasive products that would scratch the surface. Dry each element thoroughly before reassembly to prevent corrosion. A complete cleaning every 2-3 cycles maintains the system's efficiency.
Yes, the system includes programmable timers for each tier. For beginners, start with 18h of light for growth at 70% power, which is about 63W per tier. Then switch to 12h/12h for flowering, gradually increasing to 100% power. Since LEDs are cooler than HPS, you can place them 30-40cm from the plants without risk of burning. This flexibility makes all the difference compared to fixed systems.
Help & advice
About Premium Pack — click a question to see the answer.
For a multi-tier system like our Premium Pack 2023, I recommend well-distributed LED power. Here, with 450W of LEDs intelligently distributed across 5 levels in a 120x40x200cm Probox XL, we have calculated the optimal light input for each tier. The goal is to ensure uniform coverage and sufficient intensity for each plant, without overheating or wasted energy.
The ideal distance between LEDs and plants is crucial and depends on the power of your modules. In a multi-tier system like this, I advise starting with a distance of approximately 20 to 30 cm for young seedlings and then adjusting it. The idea is to avoid light stress while maximizing light penetration. You must carefully observe your plants' reactions: yellowing or curling leaves can indicate light that is too intense or too close.
The configuration of a multi-tier system like the Premium Pack 2023 is designed for efficiency. I ensure that each tier receives homogeneous light thanks to dedicated LED modules. It is essential to distribute the luminous power well and to use spectra adapted to each growth phase. Don't forget the importance of a good ventilation system to manage heat, even if LEDs produce less than other technologies.
That's an excellent question! White LEDs offer a broad spectrum, close to sunlight, ideal for balanced growth. Red LEDs are essential for flowering and fruiting, as they stimulate hormone production. The full spectrum, which I integrate into our premium packs, combines these wavelengths to cover all the plant's needs, from germination to harvest. This is what I prioritize for optimal performance.
For multi-tier cultivation, the total wattage is less important than the power per useful square meter and per tier. In our Premium Pack 2023, the 450W are distributed over 5 levels, which guarantees sufficient light intensity for each growing tray. I always calculate the necessary power based on the actual growing surface and the type of plants, to ensure maximum yield without waste. For more details on choosing lighting, I invite you to read our 2023 buying guide.
With LEDs, the main mistake I often see is underestimating the light intensity or, conversely, placing the lamps too close. You also need to ensure good ventilation, because even if LEDs produce less heat, air must circulate to avoid hot spots and renew CO2. Finally, do not neglect the day/night cycle and nutrient intake, which must be adapted to the accelerated growth that LEDs can enable.
It's a matter of observation! If the top leaves are yellowing, bleaching, or showing signs of burning, your light is probably too close. Conversely, if your plants are stretching excessively (etiolation) and the lower leaves are pale, the light is too weak or too far away. I always advise starting with a safe distance and gradually adjusting based on your plants' reaction. A lux meter or PAR meter can also help you measure light intensity.
Optimizing air circulation is vital, especially in a compact multi-tier system like the Premium Pack 2023. I recommend installing an exhaust fan at the top of the tent and an intake fan at the bottom to create a constant airflow. Circulation fans on each tier are also essential to avoid stagnant air pockets and strengthen plant stems. This helps regulate temperature and humidity, and provides fresh CO2 to all plants.
Cannot find your answer? 01 88 33 45 52 or by message.
