Je suis bluffé par la robustesse. Le silence est appréciable pendant le travail. Pas besoin de passer des heures, ça fait le job vite et bien. Nettoyage simple, ça change des galères habituelles. Le design est compact, parfait pour mon espace. Bon investissement !
The 90 W MT Dry 200 trims dried flowers in a 250 mm cutting drum. Master Products rates it at up to 3.5 kg/h. For sifting, order the separate 120 µm hexagonal pollen drum and use the machine’s lid.
Compact Trimmer MT Dry 200 2 789,99 €Product presentation

MT Dry 200: from hand trimming to batch work
Choose the MT Dry 200 when flowers arrive dried and separated from their stems and you want to reduce hand trimming while keeping control over the finish. Load the drum from the front, inspect the result and empty it before introducing the next batch. This makes it practical to keep varieties and harvest lots separate.
What comes with the machine
For dry trimming
Machine with stainless steel cutting drum, nylon blades, front lid and collection tray. Leaves fall into the tray beneath the drum.Optional sieving
The optional 120 µm pollen drum is sold separately. Fit it in place of the trimming drum using the supplied lid.How many loads for 7 kg?
Master Products quotes approximately 800 g per batch and up to 3.5 kg of dry flowers per hour. A 7 kg lot therefore represents about nine loads. Dividing 7 by 3.5 gives a theoretical minimum of two hours. Allow additional time for weighing, inspecting the finish, emptying the drum and cleaning.
Follow one batch through the machine
1 · Load
Identify and weigh a batch of dry, destemmed flowers. The tilting stand gives access to the front opening.2 · Inspect
The manual gives an initial trimming range of 5–10 minutes per load. Flower size, residual moisture and drum fill all affect the finish. Time a representative lot through to the finish you accept for sale, including handling, when comparing the machine with hand trimming.
3 · Empty and separate
Once the machine has stopped, collect and inspect the flowers before the next load. Empty the leaf tray separately.How trimming works inside the housing

A 90 W motor rotates the stainless steel drum at 45 rpm. The drum measures 25 cm across and 53 cm long. As flowers roll, leaves protruding through its openings meet the food-grade nylon blades. A tensioner adjusts blade tension. Where flower shapes vary, allow for visual inspection and hand finishing if required.
Workshop planning dimensions
| Footprint and height | 70 × 38 cm footprint · 48 cm high |
|---|---|
| Machine weight | 22 kg |
| Supply / motor | 230 V · 50/60 Hz · 90 W |
| Cutting drum | Ø 250 × 530 mm · 45 rpm |
| Loading tilt | 10° |
| Rated sound level | 60 dB |
Between batches, switch off, unplug and wait for the drum to stop before dismantling. The working components come apart without tools. Keep a clean surface nearby for the drum, lid and tray and follow the cleaning sequence in the manual.
Two 25 cm machines: which one fits?
MT Dry 200
Rated up to 3.5 kg/h. For regular batches, calculate weekly loads and handling time.
MT Dry 200 LiTE
Rated up to 2.5 kg/h. An alternative if that capacity covers your weekly volume. Check the version before choosing an accessory.Add sieving to your station

The machine comes equipped for dry trimming with its cutting drum, front lid and collection tray. The 120 µm hexagonal pollen drum is sold separately. It replaces the cutting drum for sieving and reuses the machine’s lid. The six replacement mesh panels fit this optional drum.
Before you order
Can I load freshly harvested flowers?
This model trims previously dried flowers. Allow for drying upstream.
Do I need a separate leaf collector?
The tray collects the leaves. Allow enough clearance to remove it when full.
What do I need to replace the mesh?
The six panels fit the hexagonal pollen drum. If you own only the standard machine, choose the compatible pollen drum first.
Read the Master Products operation and maintenance manual (PDF)
Your machine and accessory quotation
For a machine-only or machine-and-sieve quotation, email [email protected] with your weekly dry flower volume, available processing time and delivery location. As an official Master Products retailer, GrowLED can quote the machine and options separately. Instalment payment depends on order value, availability at checkout and approval.
Features detailed
| Material | tambour acier inoxydable |
|---|---|
| Power consumption (W) | 90 |
| Compatibility | 120 or 150 micron pollen drum sold separately, not included |
| Cleaning | rapide en moins d'une minute |
| Included accessories | Pollen drum not included, sold separately |
| Capacity (kg/hour) | 3.5 |
| Portability | compacte et légère |
Reviews customers
Facile à prendre en main, même pour un novice comme moi. Le nettoyage se fait vite et le truc tourne sans accrocs. Livré dans un carton correct, pas de surprise. J'ai vraiment senti que ça m'a fait gagner du temps. Pas déçu !
Bon matos, robuste et simple à prendre en main. Ça fait bien son taf sans abîmer. Le nettoyage est un jeu d'enfant, et ça tourne nickel. RAS, prix correct pour la qualité.
Aucun avis ne correspond à ce filtre.
Your questions
Viewed recently















