Refurbished

Refurbished air extractor with temperature control: smart ventilation at a controlled price

A refurbished air extractor with temperature control is the perfect solution to equip your grow room without breaking the bank. These smart ventilation systems automatically regulate extraction based on ambient temperature, ensuring a stable climate for your plants. Refurbished equipment offers the same performance as a new model, with the advantage of a reduced price and a lower environmental impact.

Why choose a refurbished air extractor with temperature control

Automatic temperature management is where it changes everything in an indoor growing setup. No more sudden variations that stress your plants! These extractors integrate a thermal probe that triggers extraction as soon as the temperature exceeds the programmed threshold, generally between 24°C and 28°C. Refurbished equipment undergoes rigorous checks: motor verification, probe testing, complete cleaning, and replacement of wear parts if necessary.

Energy savings are considerable compared to an extractor that runs continuously. Thermal regulation can reduce electricity consumption by 40 to 60% depending on conditions. And frankly, for identical performance to new, saving 30 to 50% on the purchase price is worth it. Refurbished equipment retains its adapted manufacturer's warranty, proof of confidence in the refurbishment process.

How to choose your refurbished air extractor with temperature control

The extraction flow rate is calculated based on the volume of your grow room multiplied by a coefficient depending on your lighting. For LEDs, count 1 to 1.5 times the volume per hour. With HPS, go up to 2 to 3 times the volume. A 1.2m x 1.2m x 2m (2.88m³) grow tent will require an extractor of 300 to 400 m³/h with LEDs, 600 to 800 m³/h with HPS.

The thermal regulation range must match your needs. Basic models trigger extraction at a fixed temperature (often 25°C), while advanced versions offer precise programming between 15°C and 35°C. Noise level also matters: aim for less than 45 dB for residential use. Check that the refurbished equipment includes the thermal probe and its cable, sometimes sold separately with new items.

Frequently asked questions

What air extractor power should I choose based on the size of my grow room and my lights?

The basic calculation: grow tent volume × coefficient according to lighting. For LEDs (low heat dissipation), multiply by 1 to 1.5. For HPS or MH (high heat), multiply by 2 to 3. An 80×80×160cm (1.02m³) grow tent with LEDs requires 100-150 m³/h, with HPS 200-300 m³/h. Add 20% if you use a carbon filter, which reduces the flow rate. Don't forget that temperature management allows for automatic modulation according to real needs.

What is the advantage of a refurbished air extractor compared to a new model, and is it reliable?

A refurbished extractor offers 30 to 50% savings on the new price for identical performance. The equipment undergoes a complete refurbishment process: disassembly, cleaning, bearing inspection, motor and thermal probe testing. Wear parts are replaced if necessary. Reliability is ensured by an adapted warranty, generally 6 months to 1 year. This is professional equipment that can operate for years; refurbishment gives it a second life without compromising quality.

How do I properly install my air extractor with temperature control to optimize air renewal?

Place the extractor at the top of your grow tent, opposite the fresh air inlet to create an optimal diagonal flow. The thermal probe should be positioned at mid-height, near the plants but not directly under the lighting to avoid false readings. Use rigid or semi-rigid ducts to limit pressure losses. Avoid 90° elbows, which reduce flow by 15 to 20%. The passive air inlet should be 1.5 times the outlet section to balance pressures.

What is the difference between an extractor and an intake fan, and do I need both for my grow?

The extractor expels hot, humid air outwards, creating a vacuum that draws fresh air through passive inlets. The intake fan actively pushes fresh air into the grow tent. For most setups, an extractor alone is sufficient with well-sized passive air inlets. An intake fan becomes useful if your air inlets are limited, if you want to filter incoming air, or for larger grow tents (over 3m²). Temperature management on the extractor can control both devices simultaneously.

What regular maintenance should I perform on my refurbished air extractor to maintain its performance?

Clean the blades every 2-3 months with a brush or dry cloth to prevent dust accumulation that unbalances the rotor. Check the fasteners and tighten if necessary, as vibrations can loosen screws. Check the thermal probe: clean it gently and ensure it is not obstructed by residues. Every 6 months, disassemble and grease the bearings if your model allows it. Replace ducts if they degrade, as a punctured duct reduces efficiency. A well-maintained extractor retains its performance for 5 to 10 years.