Question 1

Is it possible to easily integrate a remote temperature and humidity monitoring system via the 102mm cuffs for precise control of the growing conditions in the G-PRO+ box?

Accepted Answer

The GreenCube G-PRO+ grow box does not offer specific integration via the 102mm cuffs for a remote temperature and humidity monitoring system.However, it is entirely possible to install compatible Wi-Fi or Zigbee sensors inside, such as the connected sensors available at GrowLED, to precisely control the growing conditions remotely.This type of sensor is simply placed inside the box and allows you to monitor and manage your environment easily, but it is not a system specific to the 102mm cuffs.

Question 2

Does the steel structure really withstand the test of time? No risk of play or bending after several months with heavy suspended equipment?

Accepted Answer

The steel structure of the G-PRO+ cultivation box - 300x150x220 - 25mm tubes - GreenCube is designed to be sturdy and durable. The 25mm steel tubes provide excellent stability, perfectly suited to support heavy suspended equipment over several months. Customer feedback confirms that there is no play or bending to report when used according to the recommendations. By following the assembly instructions and the indicated maximum loads, this box remains stable and reliable over time.

Question 3

Does the 25mm steel structure support a 200mm extractor under continuous load without noticeable bending to optimize ventilation without risk of sagging?

Accepted Answer

The 25mm steel structure of the G-PRO+ cultivation box is designed to be robust and stable, providing good strength to support various growing accessories, including ventilation. However, we do not have precise data on its capacity to support a 200mm extractor under continuous load without bending. To ensure optimal and secure installation, it is recommended to directly check the supported load or consider additional reinforcement if necessary.

Question 4

Does the 25mm steel structure of the G-PRO+ box support the combined weight of a horticultural lighting system, a carbon filter, and a powerful fan without compromising stability?

Accepted Answer

The 25mm steel structure of the G-PRO+ box 300x150x220 is designed to provide excellent stability and robustness. According to the specifications of similar G-PRO+ models (notably the dimensions 200x200x220 and 240x240x220), these steel tubes easily support the combined weight of a horticultural lighting system, a carbon filter, and a powerful fan. The roof bars are specifically designed to suspend this equipment without compromising the overall stability of the grow tent. You can therefore confidently install your equipment, as the structure is designed for intensive use with heavy accessories essential for optimal LED cultivation.

Question 5

Does the 25mm steel frame of the G-PRO+ support heavy equipment such as extractors or carbon filters without deformation in a SCROG/LST configuration under intense LED light?

Accepted Answer

The 25 mm steel frame of the G-PRO+ cultivation box is designed to be very robust, capable of supporting up to 120 kg of load. It is therefore perfectly suitable for mounting heavy equipment such as extractors or carbon filters in a SCROG/LST configuration under intense LED lighting.To ensure this strength, it is important to evenly distribute the weight and properly secure the equipment to avoid any deformation. Its design with solid junctions enhances its ability to handle significant loads.In summary, the G-PRO+ is a reliable choice for this type of installation, provided that it is installed carefully.

Question 6

What is the diameter of the steel structure sufficient to suspend an extractor and a carbon filter in this G-PRO 300x150x220 box?

Accepted Answer

The steel structure of the box G-PRO+ 300x150x220 is made up of 25 mm diameter tubes, offering excellent robustness. It can support a maximum load of 120 kg, which is more than sufficient to suspend an extractor and a carbon filter in a stable and secure manner, without risk of deformation or play.

Question 7

What LED power do you recommend to optimize yield in a space of 1.5 by 3 meters with the G-PRO+ box while limiting electricity consumption?

Accepted Answer

For the G-PRO+ box measuring 300x150x220 cm, the ideal is to choose an LED power between 400 and 600W. This range allows optimizing light output while controlling electricity consumption over a surface area of 4.5 m². This power is a good compromise for most plants grown indoors, considering their light needs without overconsumption. You can then adjust according to the plant's growth and your growth goals.

Question 8

What is the maximum lighting power capacity that the 25mm steel structure can support without risk of deformation or instability?

Accepted Answer

The 25 mm steel structure of the G-PRO+ cultivation box is designed to be robust and stable, able to support heavy equipment suspended for several months without risk of deformation. However, there are no precise data regarding the maximum lighting power that this structure can carry without risk of instability. For a secure installation, it is advisable to stay within reasonable power ranges suited to the dimensions and weight of your LED equipment, ensuring a good load distribution. Do not hesitate to prioritize strong hanging systems and to regularly check the stability of the structure.

Question 9

What is the maximum LED power that the steel structure can support without risk of collapse or deformation?

Accepted Answer

The steel structure of the G-PRO+ Anzuchtbox – 300 x 150 x 220 – 25 mm pipes – GreenCube is very robust, supporting a maximum load of approximately 120 kg. Although the maximum LED power is not specifically indicated, this weight capacity allows for the safe installation of common horticultural LED panels, which are often well below this weight limit. To give you an idea, models from the same series generally handle powers of up to 800 W LED depending on the distribution and weight of the lights. This structure is therefore perfectly suited for an efficient, stable, and safe LED installation, provided that the devices are well distributed.

Question 10

Does the Diamond 600D coating require special maintenance to maintain its luminous efficiency over the long term?

Accepted Answer

The Diamond 600D coating of the G-PRO+ cultivation box is designed to be durable and efficient, requiring very simple maintenance. To maintain its luminous efficiency, simply clean the surface regularly with a soft cloth slightly dampened with water. This simple action helps eliminate dust and dirt without damaging the coating, thereby preserving its high reflectivity over the long term.

Question 11

What is the maximum load resistance supported by the 25mm steel structure in kg to know if I can safely attach an extractor and a carbon filter without the risk of deformation or falling?

Accepted Answer

The steel structure with 25 mm diameter tubes used in the G-PRO+ cultivation box is designed to offer good robustness. Generally, a round tube of this size, with a wall thickness of around 1.5 to 2 mm, can support a vertical load between 50 and 200 kg depending on the assembly and complete configuration of the frame. An extractor and a carbon filter suitable for this type of tent usually weigh between 5 and 15 kg, thus well below the usual capacity of the structure. If the mounting is done correctly (without excessive overhang or fragile anchoring points), there is no notable risk of deformation or falling. For secure attachment, it is important to distribute the load properly and ensure the strength of the attachment points. This configuration is quite standard for this type of indoor installation under horticultural LED lighting.

Question 12

Does the 25mm steel structure support heavy extended loads such as extractors and filters without any deformation?

Accepted Answer

The 25 mm steel structure of the G-PRO+ cultivation box 300 x 150 x 220 is designed to be robust and stable, capable of supporting the combined weight of a LED light, a carbon filter, and a powerful fan suspended from the ceiling. However, there is no formal guarantee regarding the maintenance of a 200 mm extractor under continual load without flexing. For optimal and safe installation, we recommend checking the exact load of your equipment or providing additional reinforcement if the weight is particularly high. This vigilance will ensure perfect stability in the long term.

Question 13

What is the maximum height of the ventilation system that I can install in this GPRO 300x150x220 tent to ensure good airflow without compromising the stability of the 25mm steel structure?

Accepted Answer

For your G-PRO+ cultivation tent 300 x 150 x 220 cm with 25 mm steel tubes, the maximum interior height is 220 cm. You can install a suspended ventilation system up to about 2.00 m in height, leaving at least 20 cm of free space under the ceiling to ensure good airflow. Thanks to the robustness of the 25 mm steel frame, stability is not compromised by the weight of standard extractors or filters. Just make sure to maintain this margin of space to avoid any contact with the roof, which also optimizes the airflow. In summary, aim to install your ventilation at a height less than or equal to 2 m to combine performance and stability.

Question 14

What is the best method to manage ventilation in the G-PRO+ box to optimize the growth and flowering of plants while limiting temperature and humidity variations?

Accepted Answer

To optimize ventilation in the G-PRO+ cultivation box, it is essential to maintain a constant air exchange with an efficient extractor that expels hot and humid air, paired with a less powerful intake fan (about 20% less) to create a slight negative pressure. Inside, oscillating fans should distribute air evenly without blowing directly on the plants, promoting good CO₂ renewal while avoiding stress and excessive evaporation. Position the air intake near a source of cool indoor air to stabilize temperature and humidity. Use short, straight ducts for extraction to preserve efficiency, and above all, regularly monitor temperature and humidity to adjust ventilation according to the plants' needs. This fine management ensures a stable microclimate, ideal for growth and flowering.

Question 15

Can we install two different cultivation systems in parallel in the G-PRO+ box without the risk of cross-contamination or climate management issues?

Accepted Answer

The G-PRO+ cultivation box offers a robust structure and a very well-sealed interior that allows for the installation of two different cultivation systems in parallel. However, to avoid any cross-contamination or climate management issues, it is essential to set up sealed partitions to physically separate the spaces, as well as an appropriate ventilation system to independently control the airflow in each zone. Without these precautions, the risk of spreading diseases, pests, or pollen through air or water remains real. The box does not provide integrated sealed compartments, so effective separation and well-calibrated ventilation must be ensured to guarantee optimal conditions for each crop. In summary, yes it is possible, but the success of this installation relies on a rigorous organization of the indoor climate and physical barriers between the crops.

Question 16

Is vocal integration possible to remotely monitor the environmental parameters of the tent and thereby automate lighting and irrigation according to the collected data?

Accepted Answer

The G-PRO+ Anzuchtbox tent is designed as a passive space, optimized for insulation and manual management of growing conditions thanks to its robust structure and reflective interior. It does not have vocal integration or a native system to automate lighting and irrigation. To remotely monitor environmental parameters and automate your setups via voice command, you will need to pair the tent with external connected equipment, such as smart sensors and automated controllers that are compatible with voice assistants (Google Home, Alexa, etc.). This approach offers you great flexibility to create a growing environment perfectly tailored to your needs, thanks to customized home automation that you will integrate yourself.

Question 17

G-PRO+ cultivation box - 25mm steel structure, Diamond 600D, 9.9m3, optimized ventilation. Under LED, what are the weight limits for input and output for extraction and intrattraction, to integrate a cooling system without deforming the structure?

Accepted Answer

The G-PRO+ cultivation box 300x150x220 cm, equipped with a 25 mm steel tube structure and a Diamond 600D coating, supports a maximum suspended load of 120 kg. This capacity includes all equipment such as the air extractor, carbon filter, cooling system, and fans, whether for extraction or intrattraction. To integrate a cooling system under LED lighting without risking deformation of the structure, it is essential that the total weight of suspended equipment does not exceed this limit of 120 kg. It is recommended to distribute the load over several mounting points whenever possible, to avoid any concentration of weight that could affect the strength. The ventilation sleeves remain suitable for the airflow passage but should not be used as a load support. Finally, regular checks of stability and absence of deformation are advised to ensure optimized ventilation over time.

Question 18

Can we install an independent ventilation system in each compartment of the G-PRO+ box to run two crops in parallel while optimizing air and humidity management?

Accepted Answer

The G-PRO+ box, thanks to its robust structure with 25 mm tubes and its multiple modular sleeves with cord closure, allows for the setup of two independent compartments by installing an internal partition. Each compartment can therefore have its own ventilation system (extraction and intake) to optimize air and humidity management specific to each crop. To ensure effective ventilation and limit exchanges between compartments, it is important to install suitable fans and create controlled negative pressure in each area. Adding autonomous sensors also allows for precise monitoring of temperature and humidity, offering personalized control for each crop. In summary, the G-PRO+ offers great flexibility to run two crops simultaneously with an independent ventilation system in each part, provided that the separations are well sealed and appropriate equipment is chosen.

Question 19

Volume of 9.9m3, steel structure 25mm, Diamond 600D interior at its best. What is the maximum weight limit for accessories on the steel frame?

Accepted Answer

The 25 mm steel structure of the G-PRO+ Anzuchtbox – 300 x 150 x 220, with its Diamond 600D interior, can support a maximum weight of approximately 120 kg of suspended accessories. This includes LED panels, carbon filters, and other equipment, provided the load is well distributed and solid hangers are used.To ensure stability, it is recommended to regularly check the integrity of the structure and to organize the loads properly.

Question 20

Does the steel structure easily support the weight of an extractor and a LED light without modifying the overall stability of the tent?

Accepted Answer

The steel structure of the G-PRO+ cultivation box – 300 x 150 x 220 – 25 mm tubes – GreenCube is designed to be very robust, thanks to its 25 mm tubes that can support up to 120 kg. The combined weight of an extractor and a horticultural LED light, generally between 5 and 15 kg, is therefore well within this capacity. Provided that the load is properly distributed and solid anchor points are used, the presence of these suspended equipment does not compromise the overall stability of the tent, nor its shape. You can thus install your extractor and LED light with confidence, for a calm and sustainable cultivation.

Waterproof	No
Forme	Rectangulaire
Marque	GREENCUBE
Dimensions (cm)	300x150x220
Surface de culture (m²)	4.5
Compatibilité	éclairages MH/HPS 600-1000W ou LED 1200W, systèmes hydroponique, terre ou coco
Densité du mylar	600D
Barres de suspension	Oui
Diamètre des orifices de ventilation (mm)	102
Nombre d'ouvertures	2
Charge max (kg)	120
Diamètre des tubes (mm)	25
Volume (m³)	9.9
Nombre de portes	2

Product successfully added to your shopping cart

There are 0 items in your cart. There is 1 item in your cart.

G-PRO+ cultivation box - 300x150x220 - 25mm tubes - GreenCube

Points forts

Étanche

Présentation du produit

Main Features :

Adaptability and Versatility:

Horticultural Reflector and Air Circulation:

Opinion from an expert grower:

Frequently asked Questions :

Caractéristiques détaillées

Comments All reviews

Summary

Your questions about this product

Exchange under 14 days

Free delivery from 100€*

Delivery in Europe

Payment secured

Facilities of payment

Best prices guaranteed

Guarantee GrowLED

GrowLED Sponsorship