Expert LED horticole depuis 2009 +50 000 commandes livrées Note boutique 4,7/5 · 1 766 avis King-Avis SAV horticole français

Catalog

STBLED

0 products

STBLED: The Game-Changing Horticultural LED Lighting

STBLED is revolutionizing horticultural lighting with its latest generation LED panels specifically designed for indoor cultivation. These lights combine formidable energy efficiency with optimized light spectra to support your plants from germination to harvest. Say goodbye to HPS lamps that heat up like radiators and inflate your electricity bill.

Why choose STBLED lighting for your grow

STBLED LEDs stand out for their exceptional luminous efficacy, often exceeding 2.8 µmol/J. In practical terms, this means more useful photons for your plants with fewer watts consumed. Their full-spectrum faithfully reproduces natural light with peaks in red (660nm) and blue (450nm) that truly boost photosynthesis.

Thermal management is where STBLED truly excels. Their aluminum heatsinks and quality drivers maintain a stable operating temperature, even after 12 hours of continuous lighting. The result: your plants don't suffer from thermal stress, and your ventilation bill remains reasonable. Recent models even include dimmers to adjust intensity according to needs.

How to choose your STBLED lamp

For a 60x60cm tent, plan for a minimum of 150W of STBLED LED. For a 100x100cm tent, aim for 300-400W depending on your ambitions. The rule of 30-40W per square foot remains valid, but with recent STBLEDs, you can sometimes go down to 25W thanks to their increased efficiency.

The spectrum is crucial. Models with growth/flowering switches allow you to optimize each phase: more blue (400-500nm) for bushy growth, then switch to more red (600-700nm) during flowering to maximize production. Some STBLED models even offer programmable spectra via a mobile application.

For installation, check if your model accepts a direct 220V power supply or if an external driver is needed. High-end STBLEDs generally integrate everything into the housing, which is more convenient for installation. Also consider the dimensions: some panels are more than 5cm thick, which matters in a low tent.

Frequently Asked Questions

Which STBLED lamp should I choose for a 1m² tent during the growth phase?

For 1m² in growth, a 200-250W STBLED is more than enough. Opt for a model with a blue-rich spectrum (450nm) and cool white (5000-6500K) which promotes compact and vigorous development. The optimal distance will be 40-50cm above the canopy to avoid photobleaching while maximizing light penetration. Check that your model offers intensity adjustment, which is very practical for sensitive young plants.

How far should I install an STBLED lamp above my plants?

The distance varies depending on the power and stage of development. For seedlings, keep 60-80cm with a 300W STBLED. During growth, lower to 40-50cm, and during flowering, you can get closer to 30-40cm if the temperature remains under control. The trick is to monitor the top leaves: if they curl or whiten, it's too close. A lux meter helps tremendously: aim for 200-400 PPFD during growth and 600-900 PPFD during flowering.

Do STBLED LEDs generate a lot of heat, and do I need an additional ventilation system?

STBLEDs generate significantly less heat than HPS, but they still produce heat at the drivers and heatsinks. Approximately 30-40% of the consumed power is converted into heat, compared to 90% for an HPS. An extractor adapted to the volume of your space remains essential, but you can often reduce the flow rate by 30-40% compared to an equivalent HPS setup. Recent models with passive heatsinks are particularly quiet.

How do I switch from growth to flowering spectrum with STBLED models?

Most STBLEDs have two separate switches: VEG (growth) and BLOOM (flowering). During growth, activate only the VEG switch for a blue-rich spectrum. Two weeks before switching to 12/12, activate both switches to gradually acclimate the plants to the full spectrum. During flowering, keep both switches activated or switch to BLOOM mode only, depending on the model. Some recent STBLEDs offer automatic programmable transition via remote control.

What is the lifespan of an STBLED lamp, and how do I maintain it to make it last?

A quality STBLED easily lasts 50,000 hours, which is 5-7 years of intensive use. To maximize its longevity, dust the heatsinks every 2-3 months with a dry brush or compressed air. Avoid direct moisture on electronic components and regularly check that the fasteners remain tight. Drivers are often the weak point: if they heat up abnormally or make noise, it's time to contact customer service. Good maintenance can extend the lifespan up to 70,000 hours.

Help & advice

Frequently asked questions

About STBLED — click a question to see the answer.

How to choose an STBLED horticultural LED lamp?

To choose your STBLED lamp, I advise you to consider several key factors. First, think about the size of your growing space, as this will determine the area to be covered. Then, evaluate the type of plants you are growing and their specific light needs, especially whether you are in the growth or flowering phase. Finally, your budget will, of course, have a say, but I can assure you that the investment in an STBLED is quickly recouped through energy savings.

What wattage STBLED panel should I choose for my indoor grow?

The ideal wattage depends directly on the surface area of your grow tent. Generally, for indoor growing, I recommend about 300 to 600 watts per square meter for optimal flowering. However, with STBLED LEDs, the efficiency is such that you can often achieve excellent results with slightly less power than you would have used with older technologies. Feel free to consult the product sheets for specific recommendations for each model.

What is the difference between STBLED and HPS lamps?

The difference is major! HPS (High-Pressure Sodium) lamps generate a lot of heat, which can be a problem for climate control in your growing space and leads to high electricity consumption. STBLEDs, on the other hand, are much more energy-efficient, produce less heat, and offer an optimized light spectrum for plants, from germination to flowering. No more hefty bills and temperature problems!

What is the purpose of the full spectrum of STBLED panels?

The full spectrum is somewhat the Holy Grail of horticultural lighting! It means that the panel emits light across all wavelengths necessary for photosynthesis and the harmonious development of the plant, from blue for vegetative growth to red for flowering and fruiting. In practice, this allows your plants to receive exactly what they need at each stage of their life, as if they were under natural sunlight, but with unparalleled precision.

How to install an STBLED panel for indoor growing?

Installing an STBLED panel is generally very simple. I advise you to hang it above your plants using the supplied hanging kits, making sure it is stable and level. Most models are plug-and-play; just plug them into an electrical outlet. Don't forget to consult the user manual specific to your model for detailed instructions and safety precautions. The distance from the plants is crucial, I'll come back to that right after.

What distance between STBLED panel and plants?

Distance is an essential adjustment to optimize the efficiency of your STBLED and avoid light stress. In general, I recommend starting at about 40 to 60 cm from young seedlings and adjusting it as your plants grow. For flowering, you can often bring the lamp a little closer, around 30 to 45 cm, but this will depend on the power of your model and the sensitivity of your varieties. Observing your plants is your best indicator: if the leaves turn yellow or curl, the light is too intense or too close.

Is STBLED suitable for flowering?

Absolutely! STBLED panels are perfectly suited for flowering. Thanks to their optimized full spectrum, they provide the red and infrared wavelengths necessary to stimulate flower and fruit production, thus promoting high yields and superior quality. This is one of their great advantages over other types of lighting that may lack certain spectral components crucial at this stage.

Which STBLED panel to buy to start?

To start, I advise you to choose an STBLED model that offers a good balance between power and price, and that is suitable for the size of your planned growing space. A panel of 100 to 200W actual power can be an excellent starting point for a small grow tent. I recommend reading the detailed descriptions of our products and not hesitating to contact me if you have more specific questions about your project. The important thing is to start with reliable and efficient equipment to ensure the success of your first grows.

Cannot find your answer? 01 88 33 45 52 or by message.