Prima Klima LED

There are no products in this category.

Prima Klima LED: The Game-Changing Extractor for Your Indoor Ventilation

Prima Klima LED is the German benchmark for indoor cultivation extractors. These centrifugal fans combine extraction power, silent operation, and exceptional longevity. Whether you have a 60x60 cm grow tent or a larger space, Prima Klima has developed a range of extractors...

Prima Klima LED: The Game-Changing Extractor for Your Indoor Ventilation

What makes Prima Klima LED special? An ultra-efficient brushless EC motor that consumes up to 50% less energy than a classic extractor, while delivering a constant airflow even under pressure. Say goodbye to temperature fluctuations that stress your plants.

Why choose a Prima Klima LED extractor?

First, let's talk technical: Prima Klima's EC motors maintain their flow rate even with a clogged carbon filter. Where a standard extractor loses 30% of its power with a used filter, the Prima Klima automatically compensates. This is particularly crucial at the end of the cycle when extraction becomes critical.

The noise level, frankly, is impressive. Even at full power, most models remain below 35 dB. To give you an idea, that's quieter than a running refrigerator. In an apartment, it's a real plus.

In terms of durability, Prima Klima advertises 50,000 hours of operation, which is more than 5 years continuously. The sealed ball bearings and IP44 protection allow it to withstand humid environments without flinching. I've seen Prima Klima units run for 7 years without maintenance.

How to choose your Prima Klima LED

Sizing is fundamental. For a standard grow tent, count 1 m³/h per watt of LED lighting, plus a 20% margin. A 120x60x200 cm grow tent with 250W LED therefore requires an extractor of at least 300 m³/h. Prima Klima offers models from 160 to 950 m³/h.

The 2-speed versions are sufficient for most setups. Speed 1 for growth (quieter), speed 2 for flowering (maximum extraction). Thermo-regulated models adjust automatically according to temperature, which is convenient but not essential if you already have a climate controller.

Regarding diameter: from 100mm for small grow tents up to 200mm for large volumes. Be aware that a larger diameter allows you to reduce the speed for the same flow rate, thus less noise. If you hesitate between two sizes, choose the larger diameter.

Frequently Asked Questions

What size Prima Klima LED extractor should I choose for my 120x60 cm grow tent with 250W LED?

For a 120x60x200 cm (1.44 m³) grow tent with 250W LED, aim for a Prima Klima of at least 300-350 m³/h. The 125mm model at 315 m³/h will be perfect. This power allows air to be renewed every 3-4 minutes, ideal for evacuating heat from the LEDs and maintaining stable humidity. Remember that the carbon filter reduces the flow rate by 20-25%, hence the importance of taking a margin.

How do I install the Prima Klima LED extractor with a carbon filter in my indoor grow tent?

The classic installation: carbon filter suspended at the top of the tent, connected to the extractor by a flexible duct, then an exhaust duct to the outside. Mount the extractor outside the tent to reduce noise and heat. Use airtight clamps and ensure the duct does not have overly sharp bends (minimum radius = duct diameter). Prima Klima hanging straps are included and support up to 15 kg.

Is the Prima Klima LED quiet at high speed for indoor growing?

At maximum speed, Prima Klima LED extractors remain remarkably quiet: 28-35 dB depending on the model, which is the level of a whisper. The secret? The brushless EC motor and optimized blades that reduce turbulence. For comparison, a standard extractor makes 45-55 dB at equivalent power. In an apartment, even at night, background noise completely masks the extractor. The 100 and 125mm models are particularly discreet.

What is the difference between 2-speed and thermo-regulated Prima Klima LED models for ventilation?

2-speed models have a simple switch: speed 1 (60% of flow) for growth, speed 2 (100%) for flowering. Thermo-regulated models automatically adjust the speed according to temperature via an integrated probe: they accelerate when it's hot and slow down when it's cool. More convenient but 30-40€ more expensive. If you already have a climate controller, the 2-speed models are more than sufficient.

How do I maintain and clean a Prima Klima LED extractor to make it last a long time?

Clean every 6 months: disassemble the casing, vacuum dust from the blades and motor with a soft brush. Avoid water on the EC motor! For the blades, a damp cloth is sufficient. Check the fastenings and the condition of the ducts. The bearings are sealed and do not require lubrication. A well-maintained Prima Klima easily lasts 50,000 hours, or 6-7 years of continuous operation. The EC motor is designed to run 24/7 without problems.

Less

What power Prima Klima LED extractor for a 60x60 cm grow tent?

For a 60x60 cm grow tent, which is a volume of 0.36 m³ (assuming a standard height of 1 meter), I recommend a Prima Klima LED extractor with a flow rate of approximately 30 to 50 m³/hour minimum. In practice, a model like the PK100-L (160 m³/h) would already be an excellent choice, offering a good margin and the possibility of using a carbon filter without overloading the motor. It's always better to have a bit more power than not enough.

What is the purpose of a Prima Klima LED extractor in indoor growing?

A Prima Klima LED extractor is essential for the health of your plants in indoor growing. It ensures air renewal, expels hot and stale air, and introduces fresh, CO2-rich air. This helps regulate temperature and humidity, prevents the accumulation of pollutants, and prevents the appearance of mold and diseases. It is a pillar of effective ventilation.

How to install a Prima Klima LED extractor?

Installing a Prima Klima LED extractor is quite simple. I advise placing it high up, inside or outside your grow space, depending on the configuration. Connect it to your extraction duct, which should ideally exit the tent from the top. If you are using a carbon filter, I recommend placing it inside the tent, directly connected to the extractor's inlet. Don't forget to secure everything well to avoid vibrations and noise.

What mistake to avoid with Prima Klima LED extractors?

The most common mistake I see is undersizing the extractor relative to the volume of the tent or not taking into account the pressure drop due to the carbon filter and ducts. Another mistake is neglecting maintenance: it is important to regularly clean the blades and check the filter's condition. Good maintenance guarantees the longevity and efficiency of your Prima Klima LED.

Which Prima Klima LED product to choose for a small grow tent?

For a small grow tent, I would definitely choose a compact and efficient model. The Prima Klima LED extractors from the PK100 or PK125 series are perfectly suited. They offer an excellent flow/noise ratio and are very reliable. If I had to choose, for a grow tent under one cubic meter, a PK100-L (160 m³/h) would be my first choice for its versatility.

Prima Klima LED vs other extractors: what's the difference?

The main difference I observe with Prima Klima LED extractors is their German manufacturing quality, which translates into superior robustness and longevity. They are often quieter than competitors at equivalent flow rates thanks to their high-quality motors and optimized design. It's an investment that lasts, and reliability is a crucial point in indoor growing. I have also already discussed the brand's innovation, particularly with the Lucilu Shuttle 6.